What have you done to your 2.5 gen Tundra today?

Took her to the beach.

 

Link for the pump/flush kit?

 

Oooooo.....I looked it up!! Dual reservoir shocks? Wow!!

 

Four Uncles off Amazon

 

How did it go?

 

Not too bad and used almost 2qts. I had plenty of shop towels to catch spillage.Tools needed:
Vacuum pump/ bleeder with attachments
Rags
Pliers for the stinking clamp
2qts of Toyota Transmission and Power Steering fluid (not WS)
Air supply for the vacuum pump
I also have a Stillen CAI so I had to remove the tube for the front air dam to access the lid for the power steering so flat head screwdriver for clamps

 

I gotchya. If I do mine I might go the manual pump route. Thank you for posting this!!

 

Try to find an attachment that fits the power steering line fairly snug or it will suck air and take a little longer

 

My Four Uncles vacuum was actually a brake bleed kit but hell a vacuum pump is a vacuum pump but all the attachments are for a brake bleed which is next

 

Good advice!! Thanks again!

 

Here’s the current setup which is still a dual resi shock setup. But the new kit has some bigger benefits. Stronger, longer shocks/larger shocks, more travel etc

 

That is my next tire, I believe.

 

You could probably make your own with an aluminum bar and buy some separate Quick Grips, but I just bought the Diamondback kit, and a cheapo axe and shovel.

https://diamondbackcovers.com/produ...tg368zIPS_I0KRL3wu_CIdTeWwON_mapa-VF25N1eGa4S

 

Thanks, found this on Facebook marketplace, I spend way too much time on there

 

Much appreciated...

 

That's so freaking COOL man!! Thank you for the pic and description!!