SS6 LED Fog Light Kit for the 2022+ Toyota Tundra | Diode Dynamics

Yes I've had it off twice now. You need to get a plastic trim removal tools to get un under the top part and "pop" the tabs off. I found it easier to start on one side and after you pop it loose around the fog light then pull from the middle. It takes some force but you will NOT break that main piece. I did not remove the lower the first time but did the second time when I installed the Tow hooks.

$15 Auto Trim Removal Tool Kit - 5-Piece No Scratch Pry Tool Set for Car Panel and Dashboard Removal - Includes Door Panel Tools, Push Rivets, Car Clips - Essential for Interior Trim Work - Blue

https://www.amazon.com/Tresalto-Aut...1-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

 

The Tow hooks are Toyota OEM. Here is the kit. I wanted something stockish and that did not need to trim/cut the stock grill. I had no plans on a winch so this kit was perfect. Here is the link to the thread here on Tundra.
https://www.tundras.com/threads/toyota-oem-trd-front-recovery-hooks.150783/

Here is my build thread for all the other mods so far. It's been a fun journey for my son and I to modify.

https://www.tundras.com/threads/calif-tundra’s-2023-limited-trd-or-semi-pro-build.154633/

 

Thanks, I did buy one of the trim removal kits and no luck with that either. Between the pry tools and trying to loosen the clips from behind, it still will not budge. I am going to have to pull off the entire grille assembly to get the lights installed.

 

That will probably be the cleanest best way anyway. Good luck!

 

Is there a vid on how to aim the fogs more downward?
Thank you!

 

Just pull, it'll come off I promise. Start at the bottom edges where the sensors are.

 

Finally got my Amber SS6’s installed yesterday. Had them sitting around for three months and finally had the opportunity.