HVAC assembly linkages

I tore apart my son’s tundra to install sound deadening mats, and discovered that the heater core and a/c condenser assemblies were leaking. Took all the hvac assemblies out from behind the dash and disassembled the boxes removed the heater core, and condenser. Took out all the blend doors installed new foam. Now I can’t figure out how the linkages go back together. Ugh it’s driving me nuts cause I don’t want to reinstall the assemblies and then find out something I did isn’t right. I’m asking for help on how to reinstall the linkages. Attached are some pictures of what I need help with or confirmation on the linkages are in fact right! That’s for all the help!
OH ALSO DOES ANYONE HAVE A PART NUMBER OR SCREW SIZE AND PITCH THAT HOLDS THE ASSEMBLIES TOGETHER? I BELIEVE THEY ARE 10mm bolts BUT HAVE NO IDEA THE LENTH OR PITCH

 

This thread may help. Including the videos. https://www.tundras.com/threads/vent-control-binding-solved.58386/

Whatever you do, if you value your son's life, never install non-OEM lower ball joints on that truck.

Welcome to the forum, and if you haven't seen it, this thread is chock full of helpful info for 1st gen Tundras: https://www.tundras.com/threads/so-you-wanna-buy-just-bought-a-1st-gen-tundra-eh.115928/