2014-2021 Front/Rear Anytime Camera Mod - FRAC Harness

When I get you kit installed I'll make sure to update you guys soon after.

 

I plan to ship the 2nd lot of harnesses tomorrow, and the 3rd and final shipment for existing orders should go out Saturday.

Looking forward to some great installation threads!

 

Just picked my kit up from the post office. I'll be installing Friday or Saturday.

 

How this should be installed in a Pro since we don't have the Toyota emblem? Anyone here did that already pictures? Thanks

 

Yesssssssssssss - i just got my ship notice! Some of you kids must have ordered in lightning time as I thought I must have been first given i was paypalling within minutes of the invoice!

I second that motion... no PRO installers yet?

 

This person installed on a pro grille with a great write up on install as well.

 

Here's the camera that @BlueBottle used for his pro grill.

$13 NOAUKA Waterproof IP68 Night Vision 170 Degree Car Rear View/Reversing/Reverse Camera Universal Color CCD high-Definition chip Backup Parking HD Front View Camera

https://www.amazon.com/gp/product/B06XNM7GNS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

 

Thank you guys

 

Let me know if you want to order a FRAC harness. I know the guy that makes them!

 

Carlos, how does the low profile camera mount? Did you end up using hot glue? Is that the only way to attach it?

 

can you not rig it with a washer and nut on the backside to hold it in place?

 

There's no bolt on the back like yours. No idea how this thing is supposed to attach.

 

out looks like it has a way to stay on....and if you aren't too keen on the little lip....find a washer or something like it to put on the back to make it a wider lip. if that makes any sense.

 

I never thought about putting that one piece out. When I try to put it on tomorrow I'll attempt that and keep you all updated. Tomorrow is the big install.

 

Cool keep us posted. i just have a thing about using hot glue on my truck

 

The final round of paid orders have been boxed and labeled for shipment. They will be dropped at the Post Office in the morning.

Now I'm working on building up some inventory.

Bring on the FRAC builds!

 

am I missing the price for these?

 

POST #437



The time has come... Ordering is now open for the FRACv2 Harness Kits!

I am building 100 kits and final parts are expected in the next 10-14 days. So I anticipate that shipments will begin approximately the 3rd week of September. There are two different kit configurations; Nav and Non-Nav. The Prices are as follows:

FRACv2 kit for Vehicles WITH Factory Navigation: $179.00 + $8.00 S&H = $187.00

FRACv2 for Vehicles WITHOUT Factory Navigation: $159.00 + $8.00 S&H = $167.00

Applicable sales tax will be added for Texas shipping addresses. Shipping will be via USPS Express Mail (with tracking number) to U.S. Addresses in the Lower 48 only.

To make a purchase send your order request to this e-mail address: TundraTex@FRACv2.com

In your e-mail request, please include ALL the following information:

• Tundras.com Forum Name
• Billing Email address (A PayPal billing invoice will be sent to this email address)
• First and Last Name
• Complete Shipping Address (Address Number, Street, City, State, ZIP)
• Indicate if you have Factory Navigation or No Navigation
• Identify your Truck Model/Trim (No switch bezels needed for Limited, Platinum, and 1794 kits)
• Phone Number (optional but may help if there is a problem in processing your order)

After I have received your complete order information via e-mail, I will process a PayPal invoice and e-mail it to you. Paypal Invoices will be sent out in the order that I receive your e-mails and kits will be reserved in the order that payments are received. Once I have received 100 orders, I'll start a waiting list for the next round. You may order multiple harnesses if you'd like. The FRACv2 will work with the latest generation 4Runners and Tacomas as well.

Again, to ensure proper processing and to make sure you get the right kit, please make sure to provide all the information requested above. I might not be able to process your order immediately if information is missing.

For 1794, Platinum, and some Limited models, there are no blank factory switch locations in the cab, so you will need to determine a location for your two switches. A convenient place to install them is in the ledge above the accessory power panel as seen below. (Thanks @BlueBottle for use of the pictures). For all other vehicles the switches will include a switch bezel that will plug into factory blank switch locations.





Let me know if you have any questions and thanks again for your patience and interest in the FRACv2!

TundraTex

 

Ok guys finally my FRACv2 is finally installed. I previously posted about using the low profile front camera. Here I tried to include a picture of what it looks like using that camera.

 

Looks great, Carlos!

 

I am very very happy with your work and the outcome.

HIGHLY RECOMMENDED!!..

 

Mine should be here Monday. Can't wait. Already did the camera install an plasti dipped my grill. I love the plasti dip paint. Super easy.
Carlos, how did you route your rca cable? Do you have pics of that?

 

Route the RCA cable and power line through the passenger side firewall grommet. Then by removing the clip-in panel above the glove box you can route the cable to the Entune Bay pretty easily.

 

That's exactly the way I routed my cable. Easy does it. It's easier to pass the cable from the inside out at the grommet. Otherwise you are going to have a hard time. By the way don't forget to use the secret ingredient which is GREASE, to lube the head of the RCA cable. I placed a on foot piece of cable attached to the RCA cable with electrical tape and covered the plug then pulled it from the engine bay.

 

Cool. Was looking at it today. The grommet that the wiring harness goes through the fire wall seems easy enough to get through. I haven't started to look behind the glove box yet. I figured I'd wait till I had everything apart for that. Is it pretty easy behind the glove box?

 

Yes, pull the long skinny panel with the A/C vent on the right side, above the glove box area. It's just held in with clips. I'll see if I can find a picture. This allows you to fish the cable from the grommet, above the glove box area, over to the Head Unit bay.

 

As for the grommet, cut off the lower nipple on the engine bay side, then on the interior side you can cut a small 'x' in the grommet across the small opening opposite the nipple. Then push a hangar or other wire through the grommet hole, tape your video/power cable to the hangar, and pull it through from the inside.

 

Good Morning. I've been getting a few questions on camera installations. Here's a short video to describe how the camra should be wired up to the FRAC harness.

https://youtu.be/HLhIP_5VloY

 

nipple.... that is a damn weird looking nipple.......

 

I got that camera too....


and maybe i need to buy a 4runner too....