1st Gen 04 DC Headlight/Turn signal

Hey guys, new member. First post.
I came across an 04 that i couldn't pass up, a few months ago.
The old owner apparently bought the wrong headlights and turn signals..I couldn't figure out why someone would use zip ties to mount them!!
I now know the subtle differences between the AC/DC models after joining this group.
After one of the zip ties breaking, and loosing a drivers side turn signal, I find myself in need of
replacing headlights and turn signals. I really like some of the complete assemblies on Amazon, but am struggling to find them. Most are for AC model. Any help with links or other posts would be greatly appreciate. Thanks guys.

 

Welcome to the forum.

Please do yourself a massive favor and read this thread: https://www.tundras.com/threads/so-you-wanna-buy-just-bought-a-1st-gen-tundra-eh.115928/

If you feel it doesn’t answer your questions, or leaves you with more questions, post up.

Specifically, download your service manual.

Next, check the lighting section.

Lastly, read the first two posts to gauge how bad-off your truck is. There are a few things that absolutely kill these trucks and they’re outlined heavily in those first two replies.

Stick around, we’re here to help and shoot the shit.

 

@Elam.Pingleton Welcome to the forum.

 

Hey Elam, I've got a used set of lights - FREE (plus shipping). PM if interested. * Welcome *

 

@Elam.Pingleton I used these off Amazon, baked them bishes open, and threw the best Chinesium bi-led projectors in them. LOL

$106 JSBOYAT Headlight Assembly Replacement for 05-06 Toyota Tundra Double/Crew Cab 05-07 Sequoia Pickup Driver and Passenger Side

https://www.amazon.com/gp/product/B07ZJ2KWRQ?ie=UTF8

I'll post a pic when I get home later today.

 

Here's the scAmazon lights and corners. The corner bottom corner sticks out a little bit forward from the edge of the headlight. The projectors are Chinesium 3 inch bi-led. The halo rings advertised were supposed to be switchback white DRL halo with amber turn signal but are actually just amber low power and bright for turn signal. I left the connector outside the rubber boot in case I decide to use them but between the bright amber LED bulbs in my turns, dual bulbs on double cabs, and the amber LED in the DRL tear drop in the inside corner of the headlight it has plenty of DRL light already. The halos would be too much I think. Anyway here's a couple of pics. These headlights were very easy to bake apart being held together with butyl rubber. The projectors throw plenty of light.

 

Did you order your headlights OP?

 

No. I didn’t understand the difference between the 4 door cab and the 2 door until I paid for them. 10 mins after I made purchase I found out and tried to cancel. Now I have to return for a refund. I’m learning the hard way. Lol

 

The ones I linked are the exact ones I have on my DC at the moment.

 

These will not fit an 04 Double Cab. 04 Double Cab uses 01-04 Sequoia headlights and turn signals.

 

Learnt sumpin new today. Thanks!

 

Here are the original ones

 

Here are the new ones. Got them from Headlight Depo

 

Looks good!

Ah, I see you have the characteristic tattoo of a windshield/wind/rock deflector above each headlight. My previous owner left me with chunks of missing paint up front. Wasn't too bad to repair, but man ...