What have you done to your 2.5 gen Tundra today?

Im 99% sure but need other opinions please...

Will a 21 Sequoia TRD pro suspension work on a 21 Tundra SR5?

thanks in advance

 

I'm doing much better, thanks. Sneezing still sucks, but nowhere near as painful.

 

I’m pretty sure the sequoia isn’t a leaf spring ass end, so no

 

You should create a 'build' thread for your rig; it would give a lot of folks a quick reference to part #s you used in one place... Plus, anytime anyone asks you about the entire build or a specific piece you can just link them to your build....

PS>>> Welcome to the forum from the Central Coast!!!!

 

Thanks for the tip! I think I’ll create a build thread once I finish upgrading the interior.

 

That is correct.

 

Does that matter? The guy is supplying the rear springs but I would just use the shocks (obviously)....

EDIT- Long ago I had a 01' Lexus GS300 and put 96 Supra TT calipers and rotors on as Toyota uses so many similar parts across all its cars. Hell looking at the calipers on the 21 Tundra they look just like calipers off an old LS400 for instance

 

I’m pretty sure it’s completely different geometry in the back

 

ya I just noticed from the picture the rears shocks are totally different, but what about the fronts? they looks the same

 

Soooooo clean! I do love the "Stormtrooper" look. It'll never go out of style. Had it on my 3rd Gen and always loved the look. Pic of my "old" truck below for those who never ventured over to the 3rd Gen side of the forum.

The truck I currently have, I'm going to slowly go Cav Blue & Black. Pic of the truck before I started to de-chrome it is below. Since the pic was taken, I've done the outside emblems with the OE overlays and most of the interior (thanks to AJT's various kits). I'll be slowly converting the chrome over to Cav Blue using, most likely, the BumperShellz overlays. Then I'll start the hunt for some of the OE All-Black TRD wheels. Basically, the TRD Sport look in a TRD OR body. haha.

 

Man, those are two great trucks. Have you come to a conclusion on a preference between the two?

 

Do you have any pictures of the interior with the AJT kits installed? I’m looking to black out the interior and I am curious how good it looks/easy it is to convert. On a related note, just a heads up about the BumperShellz that isn’t mentioned in their install instructions is that you’ll want to prep (clean) both driver and passenger sides at the same time. They provide a single 3M liquid adhesive vial that dries out pretty quickly after breaking the seal. Also, you’ll probably want to have a heat gun handy. I found that lightly heating the surface and pressing against the adhesive-lined surfaces resulted in a better adhesion between the shell and bumper.

 

It's really hard to say or pick, TBH. Both trucks have their strengths and weaknesses.

I've come to appreciate the simplicity of the 21. For me, the decision to trade back to an older gen came down to my specific situation. I had a 22, which of course, is having the majority of the issues since it's the first production year. My wife and I are looking at buying some property in Western NC, near the national park. Which mean the nearest Toyota dealership is about 70 miles to the east in Asheville. I wanted a truck that I...or worst-case scenario, a local shop...could reliably work on, should I run into an issue. The 3rd Gen isn't there yet, but I'm sure it will get there with another couple years under its belt.

 

AJT has videos on their site that shows you how to install their stuff.

 

Fair enough, and congrats on the potential purchase! That area seems to be a pretty sweet spot

 

How is their quality? Does it look/feel OEM or are they inconsistent/cheap aftermarket?

 

Great looking rig - I'm partial to Super White

Question for you: did the wheels come with the TRD center caps or did you buy them separately? Black wheels are one of the items I want to grab for my truck as well.

 

Came with. I bought them from this eBay seller. To complete the black out look, I also bought this TPMS set from this eBay seller.

 

Very good OEM feel and fitment. I have the kit in mine.

 

I put pics below. None of it is hard to install, as long as you're comfortable with a panel tool. Everything is pretty straightforward. As mentioned below, AJT's site is great with the videos. You can also check out NitroZ18 Fishing's YouTube Channel. He has since purchased a 22 TRD Pro, but still has all of his 2.5 Gen Tundra content up. He has an entire video dedicated to removing interior trim pieces in his Tundra that is a great reference, if you've never done it before.

I should also say that while I'm not affiliated with AJT or sponsored in any way, shape, or form...I've been doing business with him since 2018. I've bought tons of fob cases for 4Runners, Tacos, and Tundras. I'm afraid to think about how much money he's gotten from me over the years. haha. I've given his fob cases as gifts to several carnut buddies. His stuff has been top notch since day one.

Indeed. AJT's site content was super helpful. Great stuff.

Here are the pics. Ignore all the dust & fingerprints. The fit & finish is great.

I've done the following:

• Steering wheel trim (the steering wheel Toyo badge overlay is from ebay)
• Shifter trim (swapped the stock shifter to an all-black TRD pro shifter)
• Cup holder trim
• AC control knobs & trim
• Start button trim
• 4WD knob
• Door handles
• AC vent rings

 

Forgot to mention....AJT no longer has the steering wheel Toyota emblem. There are plenty on Amazon that fit.

 

you missed literally the easiest thing to do, the stereo knobs !

 

I did it for looks too, besides the easier access to the filter. Just like anyone would spend coin for aftermarket wheels and tires. Plus, at $250 versus 500-600 new from the dealer, it was a good deal. BTW, someone in Murrieta just listed another one for sale yesterday on offer up for $300 if anyone else is looking for one local to SoCal.

 

I get that with wheels and tires. Always the first thing I do to any vehicle

 

Wheel and tire specs? My 2014 has 105k.

 

Installed driver side grab handle and tailgate power lock

 

Part# for the tailgate power lock?

 

Read this post....

https://www.tundras.com/threads/diy-pop-and-lock-for-a-fraction-of-the-cost.28693/#post-706694

 

I finally installed the morimoto 4bangers that came with my morimoto headlights I purchased 18 months ago. Also installed a pair of matching 4banger ditch lights. My FJ will get an upgrade of diode dynamics ss3 ditch lights now from the Tundra and I will be listing oem TRD Pro oem rigid fogs for sale. I will get pics tomorrow or the weekend.

When I tested the lights, only the fogs worked. For some reason the ditch lights did not work. These were probably part of the first batch of 4bangers produced and I’m wondering if maybe I blew a fuse or the wiring is switched up between both companies. The fun continues tomorrow…

 

Quoted the wrong post,

$236 Genuine Toyota 2019 & Up Tundra Power Tailgate Lock Kit Standard Wheelbase PK3B6-34JS0

PK3B6-34JS0. Buy the oem one, super easy install, plug and play. Kit has everything you need