What have you done to your 1st gen Tundra today?

While he likely started HRT early, during or right after puberty, the physical traits of a man are hard to hide. Where his belly button is in relation to the non existent hips, how wide his shoulders are, the facial features along with the jaw and adams apple, but the biggest and tale-tell is the hands. If you watch the videos closely and freeze frame at times when he holds his hands out (because he expresses himself in a dainty manner with his hands) you can see the finger length.

The main trait that you CAN NOT change with HRT even starting early, some of the hollyweird actors starting their kids at 4yo on HRT to make them change their sex, still cant change finger length. You can take a boy, start them on HRT at 4yo and at 14yo he will be a girl, real hips, real boobs, real soft skin, narrow shoulders, female voice, small appendage between the legs because its still born a male, but physically it will look identical to a girl. BUT.... The ONE thing that you are born with is finger length. No matter when you start HRT, you will never change the finger length.
A mans ring finger is longer than his pointer finger
A womans pointer finger is longer than her ring finger
This is a biological trait that no amount of HRT will fix, no amount of corrective surgery like adams apple shaving will correct or hide. So when you see "sara" in "HEr" videos, you see the large manly face, manly frame, wide jaw, lack of hips, huge hands, and you are like "wow its a dude in make-up and a wig" but no matter what, when you see the hands and finger length ratio you KNOW that person was born a male. I have watched some videos, including the Tundra tear down, i mean the content is ok and the quality of the videos are ok, i would have watched them if they were a guy or girl, but HE is a HE and HE will never he a sHE.
Just my two cents.

 

Who else checked their finger lengths???

 

Note the "female" hand in the front

 

With all that empty ceiling space? You've got plenty of room!

 

Im'a stand by my original statement.

I watched the video for some glass polishing insight. Man, woman, 8 story tall crustacean from the Paleozoic era it would have no difference to me. Glass Polishing. Some of you guys must have more free time than me

 

I built something similar earlier and my wife asked if I was preparing to be crucified. I had to show her your picture.

 

https://youtu.be/vik-7MjKDa0?feature=shared

 

I never realized women have deformed hands. Must have something to do with ribs and clay or somethings.

 

Is this in regards to the 2uz Celica swap link I posted?

 

I just want to say that I've had my truck for 3 1/2 months now, have put about 3000 miles on it, and I absolutely LOVE it! Very thankful the P.O. took very good care of it, and I intend on doing the same. For a very long time. Thanks to all of you for all the time and effort you've put into this forum. It's invaluable.

 

I'm more interested in the viceo content thank picking apart the person. Y'all some hyperanalytical mofos. I think if some folks put all that effort, thought, and energy into something productive the world would be a f'n incredible place

 

Getting back on track.

I blacked out the crome mirror covers last week. I couldn't stand the Crome any longer. Easy enough to pop them off (gentle on the clips) and hit them with a little rattle can bed liner for that rough/matching plastic look. Just a temporary fix as the passenger mirror has the wobbles and the p/o must have stripped the torx screws trying to remedy. Im thinking I'll color match the replacements with the body when I do the respray.

 

But do you have any pics of Dale on top of the topper?

 

I scrolled my camera roll for a while and came up empty handed. Ill have to snag one sometime.

He does love getting high

 

I never seem to catch it when it hits the zeroes so I started taking pics on 9s. This is when I was leaving work at 1:30 last night after like 17hours or some crap.lots of 9s on that 6.

 

It would seem that I ordered the wrong WP. The new one has a nipple on it that the old one doesn’t. Must be for a trans cooler or something. Another new one ordered this morning.

 

Showing off that long middle finger lol

 

Curious: How'd you make the circular cuts on those standoffs?

 

There is some math involved to figure out the profile. They are cut with a torch and cleaned up with a cone rock.

This is a good brief explanation
http://www.weldingdata.com/pipetemplatesample.htm

I use this calculator sometimes for tricky angles
https://www.blocklayer.com/pipe-notcheng

$12 PFERD 61829 Type 16 Round Nose Cone, Aluminum Oxide, 2" Diameter x 3" Length, 5/8-11 Thread, 18144 RPM, 16 Grit

cone rock

 

Replacing all my seals on my camper shell today hoping it helps with the leaks. I'll do the window seals once ARE ships them.

For the front I'm using the thickest rubber pipe insulation I can find. This is only required because my shell was made for a double cab and there is a big gap there without it. I'm considering throwing the old one on top of this to see if it helps.





The old double-bulb on the sides looks terrible. I'm guessing that's why it's leaking so bad.



This was extremely sketchy but @Mr.bee is a genius. Having trouble getting the passenger side to stay upright. May wait for the wife and hold it while she replaces the seal.
Edit- scratch that. I hacked a few inches off my cross and got it done.

 

Damn, seeing people weld cool shit makes me wish i could weld and had a welder.

 

I used clamps to hold the other side down & keep it from sliding. And might've been a bit more sturdy because my top is curved, so the top board was sprung. The only place i get a tiny bit of a leak is where the back glass meets the tailgate. Not really water, but the TG end is cooler than the cab end on very cold nights. Gonna have to do something different when i find an external ladder rack that'll fit.

 

Thanks dude. The best time to get started is yesterday! Harbor Freight makes a great entry level welder these days.

Here's a more complete shot of the stairs

Waiting on the rest of the project to catch up to finish the upper guard rail, balusters, and handrail.

A piece of my current job (that I really should be working on today)

 

You order some u-bolts and pins yet?
I'll be back for the eclipse. I could easily stop by after since it's on a Monday and I won't be back at work til Wednesday night.
Same offer to you @VR6T

 

I was eyeballing a few different machines for a while but never pulled the trigger on one. Unfortunately I don't have a good place to store/use a welder at the moment.

 

When I wanted to do some basic welding, but lived in a condo where it was a no-go, I took welding night class at the local community college. Got it done.