What have you done to your 2.5 gen Tundra today?

Yeah, that coupled with the fact that I could only find one dude in CO that was able to rebuild them (other than ARB) sent me packing. Nobody will (can) touch them because ARB keeps their parts close to the vest.

 

Supercharger lol

 

Had these installed the same day - same size different flavor.

 

Yep, no good.

ADS internal bypass is the correct answer if they will make them. Set the bar a little higher for everyone else.

 

Nalgene, oversize cup / yeti, wallet / extra keys, or a Sig P365 live in mine.

 

Nice

 

https://www.tundras.com/threads/chalk-bag-32oz-cupholder-mod.102672/

 

Nice. Would there possibly be an option for just the width of the switch portion? I don't need a charging position and my SG3 is using some of the real-estate and could be moved over a little.

 

George - clean your truck, bro!

Sincerely,
The Interwebz Judging Panel

 

Yeah it's a little dusty in that area and the pollen isn't helping lol. I'll take a break from my miniature tundra build to clean it.

 

Ha, good eye. Broke one of them last night. Does the replacement count towards this post once I put it in the truck??

 

Liking the new look of the Vland tail lights!

 

ha! I broke two in a senior mens league tournament the previous weekend. hopefully just a bad batch. waiting for the warranty return, playing in the Houston Oil Kings Memorial Day shootout

 

they look nice, but how do they look lit up?

 

Looks pretty bright during the day. Gotta wait until night fall.

 

Working on a 6-switch version with no charger. Two vertical rows of switches.

 

Awesome. I will definitely be interested in that.

 

How is the quality and fitment?

 

Quality is very good. I had to remove the two clips from the old light and use those for the vland tail lights. For some reason the t30 bolt couldn't reach the ones that came with the vland tail lights

 

I got my RCI tranny skid with cat guards installed today. It arrived all scraped up (I blame RCI sorry packaging), so I had to sand and paint before installation. I spayed with high temp; same stuff I use on my BBQ smoker. The actual installation went really smooth and easy. Thanks @Tripleconpanna for the tips and lessons; I pre-assembeled the whole thing, as you directed, and everything lined right up. My engine skid is from Talon, and having their TRD nut plate made it a breeze.

Getting to the nuts for the carriage bolts that hold the skid to the transfer case cross member was not difficult, but I do not have any SAE ratcheting wrenches, just metric, so I tried a 14mm on the 9/16" nuts. I'll file that one in the wrenching skills memory bank, 14mm and 9/16" are close enough to swap wrenches.


Things went so well I decided to also install my new Elevate Racks. That was a PITA, but got her done. I've had my ACI Lomax Pro Series cover for about a year now. Elevate racks play well with the Lomax tri-folds. With my racks adjusted to the 23" height, my Lomax fully opens and closes.


Finally, I rearranged my dash with new 67 Designs 20mm ball arms. Amy guesses what the center arm will hold? I think @Pangaea will know.

 

Installed a few things, which you can find in my build thread here: The Adventuremobile (2016 TRD PRO)

Also gave her a bath:

 

I'm going to install the RCI tranny skid guard with cat guards soon too. Any tips? I have the RCI engine guard on already.

 

Looks good.... glad it saved you a little time

 

This is what I shared in an RCI Best Practices thread...

46

51

I'd recommend scrolling through the 3 pages of that thread prior to starting your install as you may find some of the other info shared by others helpful as well

 

Got more pictures from further away? Looks great especially on black.

 

Just purchased this for my ‘17 TRD Double Cab 2WD.

Truck is all original OEM with 120k miles and never had an upgrade. I do tow a travel trailer so after an exhaustive research and thanks to this forum. Thanks guys you all suck!!

Front shock leveling kit:

$770 Bilstein 6112 Series Leveling Kit - 46-206084

https://www.4wheelparts.com/p/bilstein-6112-series-leveling-kit-46-206084/_/R-BBGL-46-206084

Rear shocks:

$225 Bilstein 5160 Series Shocks

https://www.4wheelparts.com/p/bilstein-5160-series-shocks/prod40017

Airlift Air Springs:
https://www.airliftcompany.com/shop/88299/

Air Lift Compressor:
https://www.airliftcompany.com/shop/74000ez/

 

@SR5style Yes, I followed what @Tripleconpanna wrote with two small differences. 1) My Talons Garage engine skid came with a TRD nut plate, so I left it in place. The larger the gap, to slid in the tranny skid, you can accommodate, the better. While instructions say 1/2", I was able to achieve over 3/4" with the Talons' nut plate and bolts. And, 2) I used a creeper, instead of a floor jack. With my Tundra on ramps, I also used two buckets, and a 2' long 1 x 2 and a 2 x 2. I put the assembled skid on the creeper and rolled it under the truck. I skootched under, on my back, head to the rear. One bucket was by my head, the other near my calves and between my legs, and directly under the rear edge of the engine skid, the gap. I slid the tranny skid off the creeper and onto my chest and thighs. Lifting with my knees, I slid the tranny skid into the gap. I had the bucket there to catch the skid incase it slipped out and fell. I then lifted the rear of the skid off my chest and wiggled and pushed toward the front; the slots for the bolts were a little tricky to line up, but not bad. I then bench pressed the rear of the skid into place and whooped!; the bracket bolt holes lined right up with the holes in the transfer case cross member. Holding it up with my left hand I slid my head bucket under the rear of the skid. Sliding the 2 x 2 in-between the bucket and skid was the perfect height to free both my hands to insert the bracket carriage bolts and start the nuts. Get a set of ratcheting box end wrenches, if you don't already have such.

 

These two thingies came in the hardware bag with my RCI tranny skid. RCI has not returned my voicemail, nor email inquiries. Does anyone know what they are intended for? There's no mention of them in the RCI instructions.

 

They go on top of the cross member as an additional large washer (also what they call the backing plate). Basically the bolt goes through the cross member, then the large ones that you have, then smaller washer and nut.