What have you done to your 2.5 gen Tundra today?

Pushing, it was kinda tight, but sits on the metal sleeve of the bushing. The 29mm kept slipping off.

 

Interesting ,i noticed a huge difference

 

Which unit?

 

Wheel spacers. Had to do it. 18" wheels with 50mm offset and they looked like they were hiding once I installed the pocket fender flares.

 

I did not mount it. It was part of this project

 

Just got the photo to go
But you can add ball via a screw that screws through the middle of the ball into the plate. It’s actually pretty cool. There is a plate underneath that provides rigidity. I went with it to mount my IDash gauges but I’ve changed my mind now

 

From the Taco garage
It fits really nicely and it’s recessed which I like

 

Put it to work, again.

 

BSM 2.0

I've driven for 40+ years without BSM, so I now see it as a tool, and a nice to have. I have two complaints with Toyota's implementation on my Tundra, however. 1) The indicator LEDs are on the outside mirrors, and thus visibility is affected by weather. And, 2) the BSM indicator LEDs are the same color as the turn signal indicators. So, I upgraded today...


After testing in my driveway, I went on a 20 minute drive on a busy highway, and before I reinstalled my sail panels and buttoned everything up. No errors; 2.0 works perfectly.

 

What LED's di you use?

 

Parts:

$11 Prewired Surface Mount LEDs (2835, Red LED) - 3 Pack

https://www.amazon.com/dp/B01ENC1WIO?th=1

$17 Posi-Tap taps 20-22 ga. Mini. Pack of 15. Posi Taps The Best Line Tap Youll Ever Use! (Choose Your Gauge Size and Amount) (15, 20-22 Mini)

https://www.amazon.com/dp/B0B381X9NB

$7 Permanent Paint Pens Black Markers - 2 Pack Single color Oil Based Paint Markers, Medium Tip, Quick Drying and Waterproof Marker Pen for Metal, Rock Painting, Wood, Plastic, Canvas, Mugs

https://www.amazon.com/gp/product/B09MRYX2DC?th=1

I use the 2021 EWD (thanks to @RainMan_PNW) to find the pins and wire color. Removed the sail panels only, disconnected the M6 and N5 connectors going to the mirrors, and used the posi-taps. Painted the LEDs, all but the lens.

 

Finally installed a trans cooler (yesterday )

 

That’s a biggie right there! Nicely done. On my list for this spring.

 

What size did you go with?

 

I haven't had chance to really test it out yet on some turns, but does feel more planted. Now to take advantage of skid plate being off and change front differential oil.

 

Hey sorry for the late reply

https://www.alloutstickers.com/products/i-force-5-7-badges

 

Where did you get the parts to swap out the old intake tube? Just curious because the big ass thing on the stock intake is no longer on yours

 

https://www.tundras.com/threads/rainmans-2021-lunar-rock-trd-pro-build.77317/page-34#post-3492055
i got the actual parts from Sparks, but that post has links to the regular Toyota parts site.

 

@RainMan_PNW I broke the lower airbox front mounting leg 3 times due to not having an accordion style boot between the engine and fender mounted airbox. Additionally it wiggled the lid around constantly, letting dust pass off-road.

 

No pics but got to pick her up yesterday, and I love it lol

MCBAutotech in Houston did the install and the Yotawerx Stryker tune. Maynard is always a great guy to deal with, very chill and lots of knowledge. Also got to meet @mZiggy when I dropped it off.

edit; added pic

 

Replaced the left rear cab weatherstrip that had been chewed up by dog ingress/egress. 5 min job, so no big deal. The real story was using Olathe Toyota https://parts.olathetoyota.com/. Their parts breakdown was easy to use (highlighted the part you needed), they were quite a bit cheaper than anybody else I found, and excellent communications from ordering to delivery.

 

That's my fear with it too.

 

I drove around last night, and these red LEDs are just too bright for my old eyes. So, this morning I got out the paint pen again and lightly went over each LED again, including the lens this time. I can still easily see them in the daytime; I'll see how they are when it's dark, tonight. A benefit of adding more black paint is camouflage; they are hardly noticeable at all now; blend right in.

 

Sounds like you need solid motor mounts

 

Installed some RCI skidplates, a Chassis Unlimited bumper, more Baja Designs lights and finally saw some dirt! Many more details in my build thread here: 2021 Prototyping Rig

 

Got a digital speedometer on 2015 CM.

 

Looks so good!

 

Sick! I just snagged the 48 MOS

 

Who had the part number for the black surround (radio) please?

Evidently https://autoparts.worldtoyota.com/ has a 25% off sale, FYI

NM, found it ...55405-0C020-C1