Major Rubbing with TRD Lift Kit

In the document for the TRD Lift it states tire size under the Conflicts section:

 

makes sense to me.

 

What is the instructions to hide the sway bar behind the skid plate? My front sway bar is running between the ground and skid plate. Looks terrible. Is there a mod to run it between the truck and skid plate like on the TRD Pro?

 

I was hoping that someone would come up with a way to do that - for now, I took it off and it’s collecting dust in the garage. Bummer…

if anyone finds a way, please post!

 

Currently running 17X8.5 +25 offset wheels wrapped in 37X12.50R17 tires. The truck is lifted using ICON Stage 6 3.5" suspension lift. Zero rubbing whatsoever, even when driving on the trails. Prior to switching my tires and wheels, I was running a set of 20X9 0 offset wheels and it would rub when I'm turning and the front suspension has to articulate. The scrub radius when using a +25 offset wheel eliminated all the rubbing problems I was having. The stance isn't as nice as a 0-offset. The +25 only pokes out about less than a half inch. I do think a slightly more aggressive +12 offset might not cause any rubbing problems, but if you want to play it safe, then go with a +20 or +25.

 

There's a few work arounds with the longer bolt & spacers to make the TRD skid plate usable.

 

Wheel/tire combo looks nice. 1/2" poke at most is perfect IMO.