WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Not sure what you mean by Heritage Grille. That's the TRD Pro Grille, or are they just the same thing with different names. I just hadn't heard it called the Heritage Grille before, but I do agree it's the nicest looking one out there.

 

Please share when you do! That looks sexy!!

 

Thank you for sharing these pictures! I have been going back and forth on getting some or not. I really appreciate the multiple angles. Looks good!

 

What's your wheel/tire size combo and offset? Looks great!!

You took the words out of my mouth. I've been on the fence for a while now, and have decided to pull the trigger, especially now that I've got new wheels on the way with a +1MM offset.

Anyone know if you can use a mudflap in combination with these? I know they're likely not needed, but curious to know if they'll fit. From what I read about installation on them, I don't think it's possible.

 

Vision Turbine Wheels 20x9 +18
Nitto Ridge Grappler 295/60/20 which are roughly 34"

 

Educate me on using catalytic converter shields for theft prevention of catalytic converters.

Don't the thieves use a Sawzall to quickly cut the catalytic converters free? I'm thinking an aluminum or SS shield would only slow them by the few seconds it would take to cut thru the shield then the converter? What am I missing here?

 

Sweet! My +1 will give me about 0.7" more poke, but I'm thinking with those flares it should still look good.

I've got some Fuel Catalyst 20x9 +1 on the way. Going to run the 275/65/20 Recon Grapplers which is just over 34". Can't wait to get the wheels here.

 

it would actually take them quite a bit longer. Although not hard to cut through it results in a lot more cutting/time. Thieves want to be quick. Generally they’ll see it and go to another truck, unless you’re somewhere rural where they know they have time.

In 11 years, working areas where cat thefts were prevalent I’ve yet to see a file where a cat was stolen where there was a shield.

 

TRD Pro is a new concept. It’s called a heritage grille because iconic Toyotas dating way back used the Toyota lettering grille

 

20" look great if done right. I ordered 285/65R20 Mickey Thompson Baja Boss AT with TRD 3" lift. I will post pics when I get the truck. I'm dropping it off this Tuesday. Celestial Silver Limited.

 

Thanks! I figured it would be something like that. Appreciate the lesson. I'll be getting the same grille soon. Looks great!

 

Posted my thoughts and sound clips here:
https://www.tundras.com/threads/official-3rd-gen-exhaust-thread.102782/page-7#post-3405110

 

Has anyone swapped a 1794 grill for the heritage but left the chrome mustache/surround? pics of so please.

 

Added Kings with Method 707s and KO2s 37x12.5R17

 

Those 37’s look great!

 

Looks great!

 

@eddiefromcali - do you still have the black flares for sale?

 

Sorry, sold them to @cgdmnky

 

keeping the rodents out of the airbox.

304 Stainless Steel Woven Wire Mesh, 5 Mesh - Aperture 4.5mm, 11.8"x23.6" (30 X 60CM) - for Vent, Cage, Cabinets Mesh, Security Guard Garden Screen

https://www.amazon.com/gp/product/B07TVNCNGJ

 

Added the Beat Sonic plug and play mini amp to the average sounding JBL system.
This thing does not disappoint and a truly simple install. Sound is so much crisper and the bass thumps pretty good and now I don’t need to crank the volume to 55!
Thanks to all on the forum for their recommendations.Easily the most bang for the buck I have spent on a mod so far and Beat Sonic had a 15% off cyber sale to boot!

 

Took her work yesterday. Loaded down with tools and materials. Was a little disappointed with the reduced size of pretty much everything inside and out. The rest of the ride was great. Went Christmas tree hunting in the mountains today. Tested out the new off road features and was very impressed. Seemed to lack a little suspension travel but everything else was awesome!

 

Almost forgot I turned off the world’s most obnoxious seatbelt chime with Carista. Does anyone know if they work for multiple vehicles? If so, I’ll be helping out every 3rd gen owner I know.

 

Yes you can use it on any other tundra, as well as many other males and models. It's not tied to any specific vehicle.

 

Thanks for sharing! Cyber sale is down to 10% now, but still going on. I just ordered mine based on your post. Appreciate it.

 

I got one sitting at home as well. Going to install it after the dealer replaces my sub!

 

You'll like it. I've had mine for 6 months now. No complaints, hasn't skipped a beat

 

you got any pics/info/part numbers of harness for the fog light to split power and power the amber markers? I cant stand mine being on 24/7

 

This will connect to the wire that would be going into the fog, giving you a split connection. You can get away with just that splitter, and cut one connection off and wire directly to the amber marker wires.

Just to note, the green wire on the OEM connection is positive, white will be ground. You can only plug the actual fog light connection in one direction, so plug the splitter in accordingly.

I didn’t want to cut the splitter, so I just bought

$8 iJDMTOY Pair H11/H8 (Male) to 9006/HB4 (Female) Converter Adapter Socket Wiring Harness Kit

this to cut that connection off, and added an in-line fuse to make myself feel better lol. Not necessary, IMO. But with everything costing ~$25, I said why not.

My truck is getting PPf’ed as I type this, so I can’t get pictures now. But I can when I get it back next week, if you still had questions.

 

good deal. thanks man

 

Digging the way those tires look with the stock Platinum wheels, might have to copy you.