1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Running wires through firewall

Discussion in 'Lighting' started by swede78, Oct 30, 2023.

  1. Oct 30, 2023 at 11:41 AM
    #1
    swede78

    swede78 [OP] Not so new member

    Joined:
    Sep 25, 2015
    Member:
    #1855
    Messages:
    292
    Gender:
    Male
    First Name:
    Lars
    westminster co
    Vehicle:
    2019 tundra platinum mgm crew max
    Nothing yet
    I have a 19 tundra crewmax, where have you run wires through the firewall to run off-road lights and switches?
     
  2. Oct 30, 2023 at 11:43 AM
    #2
    AZBoatHauler

    AZBoatHauler SSEM#140 / 2.5 gen plebe

    Joined:
    Aug 13, 2019
    Member:
    #34576
    Messages:
    9,035
    Gender:
    Male
    First Name:
    Adam
    So.Arizona
    Vehicle:
    2017 CrewMax 4x4, 2017 LandCruiser, 2005 Sequoia 4x4
    Demello / SOB Fab Bumpers, SuperWinch, WKOR sliders, RCI skids, Baja Designs lighting, Billy 6112 and 5160 w/ CB +2, JL Audio with Alpine HU, DD 10" Exhaust, LED headlights, Rago fab mounts, 35” BFG, HAM radio
    Assuming wires are going near driver, there is a big grommet through the firewall under the ABS module that comes in near the parking brake. Be careful not to damage existing wires making your hole.
     
    FrenchToasty likes this.
  3. Oct 30, 2023 at 11:54 AM
    #3
    swede78

    swede78 [OP] Not so new member

    Joined:
    Sep 25, 2015
    Member:
    #1855
    Messages:
    292
    Gender:
    Male
    First Name:
    Lars
    westminster co
    Vehicle:
    2019 tundra platinum mgm crew max
    Nothing yet
    The harness comes where you can disconnect the main harness about 2-3 feet from the switch, that connection is about 3/8-1/2 inches wide. And yes it will on the drivers side, not sure where I’m putting the switch.
     
  4. Oct 30, 2023 at 12:01 PM
    #4
    swede78

    swede78 [OP] Not so new member

    Joined:
    Sep 25, 2015
    Member:
    #1855
    Messages:
    292
    Gender:
    Male
    First Name:
    Lars
    westminster co
    Vehicle:
    2019 tundra platinum mgm crew max
    Nothing yet
    On my 08,I took a coat hanger taped the wires to it and went through the grommet where the parking brake went through. The hole for this harness connector will have to be larger.
     

Products Discussed in

To Top