WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

thanks. that's pretty much where I am at but it is eating at me to get it working. thanks for the response.

 

Got my my Leitner ACS Rack installed tonight, now I can start planing the accessories layout.

 

So referencing the Ditch Lights wiring questions that I had (above)I finally figured it out this morning:
I have Lasfit ditch lights and their harness-color schemes on other lights are different color code but should be able to adapt from the below

Cali Switch wires/Lasfit Harness wires
Red Yellow
White Black
Black Black
Green Red (fused)
Yellow Tan wire from unused harness

The Cali Raised switch diagram on their site is incorrect as someone earlier had reported.
Works great and hope it helps someone else.

 

For anyone that's curious, here is how the Leitner rack impacts your rearview camera view. Almost doesn't matter in my opinion.

 

Added 6 inch wide 3M clear vinyl paint protection film to the door sills.



I bought this:

$26 3M Clear Protection inyl Film (6" x 96")

https://www.amazon.ca/dp/B073X7Q4M7?_encoding=UTF8&th=1

I used this as a guide to install:

https://www.youtube.com/watch?v=vfcP7_buOTU

 

I modified an oar holder for my retriever pole.





It looks like I need to install the tailgate gasket I bought next to keep the dust out.

 

Received my color matched lower valance today and couldn't resist to install it when I got home from work.
Tomorrow getting new sneakers put on...

 

Kryptek seat covers

 

VHT wheel paint to stock sr5
TRD center cap
305/70r18

 

cali raised bed rack, tepui rtt

 

Are you able to provide the part number for the Grill Surround?

Where did you order from?

Thanks!

 

Picked up new tundra yesterday. Immediately got rid of chrome. Waiting on colour matched moustache to arrive. 295’s go on this evening. 1” cornfed front levelling kit should be here any day. Shipping to Canada is sloooow!

 

Congrats on the new Rig and I know that feeling about the over kill of chrome

 

I know some folks could take it or leave it, but my latest mod was a small and easy one; finally received the TRD Pro Dash trim pieces I ordered a while back. Shipping took a while, but in my opinion, it was worth the wait. I think it makes for a really cool and interesting change to the interior trim.

 

Got my new sneakers installed today & man what a difference,first off its much softer & forgiving over bumps and pot holes vs the rubber bands that were on before, unfortunately it no longer feels like it's on rails while cornering in sport+ mode.
But I will accept that trade off considering these will handle better in the snow,rain and the beach.I ended up getting Yokohama Geolanders M/T G003 @ 285/55R22 OEM were 265/50R22 from 50~55's = 1.22" 265 ~285's = 1.75" is significant.
It finally looks proportionate.

 

Bought it and then immediately took it to the ORV park to try it out.

 

Did you get it painted or does someone sell them paint matched?? I need a new one either way, might as well get a matched one if I can.

 

I got it and had a painter do it for me,honestly it should of came this way along with color matched door handles and bumper, also I think it looks better this way but what do I know...

If you need a new one it's $239.99 and paint is about $200 maybe you could do better with that cost I dunno.
I will gladly sell you my OEM one for $100 + shipping, you can pay me after you get it.Mine has 5k miles on it and there is absolutely nothing wrong with it.No scratches,dings cracks nada.
Shoot me a PM if ya interested.

 

Thanks! I see your new one has the front license plate mount.. does your original have the wholes in it too? I got my truck from out of state and Arizona doesn’t require front plates. I took the mount off and it left 4 little holes that bug me now lol

 

Yeah the factory valance has 2 dimples in it not penitrations,so the sales guy put in just 2 screws to mount the bracket.

 

Nova Scotian here !!! 1” front lift ?

 

Check out Chromestoppers, that’s what I did, waiting delivery

 

Nova Scotia here as well. I went with a cornfed 1” spacer that installs the same as the lean spacers do, that is above the mount and gets sandwiched in there. My front is 2 1/4” lower than the rear so this way I’ll still have about 1” of rake. The nose high front isn’t my thing.

did you get your 24 limited nightshade? That’s what I had on order, but with no eta I grabbed this trd off road when it became available.

 

4 weeks !!!!! Gonna start stripping Tacoma soon lol,, got a link for spacer ? I’ll be putting bags in the back so want to make up difference,, where bouts are ya ,, down in Digby here

 

I gave my 22 Tacoma to the wife, like the size of the tundra, traded the 20 tundra she drove in on it for more than I paid new 4 years ago.

I’m outside Truro.

scroll down to 2nd from last kit. This is the Canadian section of cornfed’s website.
https://www.cornfedsuspension.com/cornfedcanadiankits/

 

First things first, I needed to tint my windows. With 30 miles on the odometer, I drove down to my tint spot and got 15% all around and 50% on the windshield. Needless to say, I am very happy with the outcome.

 

Seeing Tera like this looks good. I would swing Tera if I had the opportunity to get it.

 

Nice! I would love to tint my windshield but in Arizona you basically get a rock smashed into your windshield at least once a month. There was a period a couple of years ago where I got my windshield replaced 4 times in 6 weeks.

 

Few shops will give you free tint with windshield replacement through insurance. BlackoutAZ is one I know of.

 

Do you have install instructions? And when you ordered the Toyota trim piece did it automatically come with the other 2 small pieces or are those separate part numbers?