WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Swapped out the grille for a TRD / Heritage style. About two hours of work; just couldn’t get an after picture until after dinner.

Used this video as a guide: https://youtu.be/fc54n15b_08

 

Where do you purchase the caps?

 

You can get them at any dealership. I bought mine online here:
https://parts.elmhursttoyota.com/oe...e-and-trd-sport-wheel-center-cap-pt280342212f

 

I put a cheap Amazon screen protector on.

$20 CDEFG for 2022 2023 2024 Toyota Tundra Sequoia Screen Protector for Tundra/Sequoia Accessories SR5 Limited Platinum TRD Pro 1794 Edition Capstone 14" Tempered Glass

https://www.amazon.ca/dp/B0BBFM76DZ?ref=ppx_yo2ov_dt_b_product_details

 

I love the look a lot better. Definitely worth the price, but hope you didn't pay to much for those green shoes.

 

It only works better if you call us and swear at us when installing!

Glad you got it on!!!

 

i accidentally wore them to a place with a black light and it was like wearing a sun on each foot.

 

Just put a 4" Rough Country lift and 35" Toyo MTs on my 2023 SR5 LB... now to find a rollbar/sports rack that has rear window protection so my quad doesn't smash it!

 

Hi, I’m looking for an honest review of the RCI sliders. Do they help or hinder getting in and out of the truck? Ones I had on my Tacoma were to small and slick to use as a step so I was awkwardly stepping over them. Thanks

 

I was originally thinking of getting the Tufskinz center console inserts and then my wife gives me a roll of black foam shelf and drawer liner. So I made my own and will give this a try. For $3.00 a roll it might be worth it.

 

Sounds like some of these trucks now that they're getting some miles on them

 

That will help keep the "soda pops" cold.

 

Installed running boards

 

Swapped from the Black Oval step bars to the Predator step bars. Found a good deal locally on a gently used set.

 

I also swapped out the rear bumper covers. Originally, the truck came with silver-ish ones, and I hated those. I swapped them out for a set of black ones I got from Sparks. They were ok, but not exactly what I wanted, so I did a DIY color match (details in my build thread below) along with the door handles and tailgate handle (not yet installed, as I have to re-clear it), and installed those today.

Original Silver:




Black inserts from Sparks:




DIY Color Matched. They are a slight shade off from factory, but not as much as the picture shows. The rest of the truck is dirty due to the obvious rain.

 

And lastly, I wasn't happy with the bed step rubbing up on the underside of the bumper, so I added 1/4" of space. Now it doesn't hit at all. Details in my build thread.

 

Did you paint the black ones or did you paint the silver ones? If you have the blacks still I'd buy them.

 

I painted the silver ones. I'll send a message to you about the black ones.

 

Just swapped out my wheels for the SCS f5s

 

No more SR?

 

NICE!!!!

 

My buddy: Hey bro. Can you help me move my microbus project car?

Me: Sure! (Thinking it doesn’t weigh anything)

the microbus loaded with a bunch of stuff:

 

Those uhaul trailers are heavy too!

 

Bought it, followed by wheels, tires, side steps, bed step, exhaust pipe, Husky mats, Weathertech rear seat cover, and last but not least: cup grip.

 

Got my tint today finally. 5% on all 4 doors and rear and 35% on entire windshield and sunroof.

 

I have the Talons cat cover and was thinking about getting the TRD skid. Did it mount with the Talons or did you need any other bolts or adapters?
Thank you!

 

You don't need to buy any other bolts or adapters. The Talons cat protector comes with 3 long Allen head capscrew bolts with nyloc locking nuts and 6 flat washers and two shorter bolts with 2 flat washers. The 3 long bolts, nuts and washers are used to secure the cat protector through the truck crossmembers. The shorter bolts are used to secure the TRD skid plate that rests up against the cat protector on the rear-most mounting locations of the aluminum skid plate and front holes on the cat protector. There are 4 other factory attachment bolts that you will reuse that mount in the same locations when you remove them from the existing plastic skid plate to install the aluminum skid plate. I applied Neversieze to all the Talons bolts. Hope this makes sense.

 

Awesome! Thanks for the info. I already have the Talons cat cover on so it should be pretty quick and easy to attach the TRD plate. I was thinking of the Talons skid but I like the TRD one better.
Thanks again! Have a good weekend.

 

Xpel Prime XR Plus tint. 15% front and rear windows, 70% windshield.

 

Nice man I did went with the XPEL tint as well and really liking it