2016 Tundra SR 4.6 Crank No Start Stalls

My 2016 Tundra 4.6 would not start on a cold morning mid December 2022. Started looking at the forms and cleaned the Throttle Body and Mass Airflow Sensor. Checked all connections and still no start. The next morning it warmed up and started right away no codes. Drove it all day and later that night, no start. Searched more forums. Inspected fuel tank and lines bang bang bang wiggle wiggle still no start. Let it sit while visiting family during Christmas. Got back replaced the battery still no start. Checked the connections again and the throttle position sensor had some play so I reseated the connection and started right up. Drove fine for 7 months. July 1st 2023 drove to work and parked. 10 minutes later I try to move my truck and crank but no start. Get off work 8 hour later starts right up and I make it home. I turned the truck off and tried to restart and it stalled out 2 seconds after. Let it sit for a while then it would start and drove it for 15 minutes came back home. Tried to restart and stalled out 2 seconds after. Next day started for 2 seconds and stalled. Decided to clean Throttle Body, Mass air flow sensor and Absolute Manifold Pressure Sensor no start. Ordered new Throttle Body and installed but still not start. Just ordered Mass Airflow Sensor and waiting for delivery but now I am thinking it might be fuel pump or sending unit fuel pump ECM or ECM after reading this post...https://www.tundras.com/threads/crank-no-start-a-chronicle.118226/