WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

I had a local wrap shop do it. He was very reasonable in pricing. The other shop wanted my truck for the full day and over $600. Seawraps in Seattle did it in 45 min for $250. If I had more time that day, I would’ve had him wrap the rear spoiler and possibly the stamped area of the tailgate. I also asked him if I removed my prinsu rack crossbars, could he wrap the roof.. He said yes.. I’m going back one of these days..

 

It's much easier and highly recommended to have a second person due to having to adjust the part to make sure it sits well.

 

Installed all OEM Trd running boards, bedmat, bed step, all weather liners, dash cam and tonneau cover.

 

I see that you have a canopy on. Doesn’t it block a camera in the rear? Wouldn’t it affect the 360-degrees Bird’s eye view?

 

Is that the Yakima Skyline Towers? They fit pretty secure?

I was thinking about going this route also because I like that they just come off when not in use, and will have room in the truck bed when the yaks are loaded

 

Over the last week, I sound deadened my doors, hard wired my radar, tinted windows, ordered 295/70/18 Wildpeak A/T 3W, ordered the Sonic amp, ordered an Undercover tonneau cover, ordered a bed rug, ordered Borla spacers, installed Weathertech floor mats, and ordered the parts to tap into the dash cam harness.

 

Installed a Decked drawer system… it was a tight fit with the Bed Rug.

 

$785 Larin TGL-500 Hitch Lift/Heavy-Duty 12V DC Motorized Truck Hitch Mount, 500 lbs Capacity

https://www.amazon.com/Larin-TGL-500-Hitch-Lift/dp/B000FAKNM0?smid=A3DU4WDIOPEB96

 

Well damn, I think I'd say that's a good problem to have in my book! Guess you're gonna have to start gutting 'em in the field? Or maybe start killing the little ones haha

 

I just bought the Yakima Baseline Towers and installed on my 2022 as I already had round bars (used adapters) and accessories. They are very secure. I hauled a 16' canoe on it down very rough roads, dry creek beds and at 80+ on the interstate without issue.

Finding a place to tie a backup rope to the front of the truck was fun without tow hooks. At least the giant grill surround prevented the rope from rubbing the paint off the hood!

Was a bit concerned that the rear bar is so close to the front one when installed as recommended, but it looks like the Thule is the same way. There is a whole lot of open roof behind the rear bar.

 

And here I was going to suggest a piece of plywood and a come along run to a back tie down.
Not so deluxe as that lift posted.

 

not with the @GG.Offroad camera relocation kit. Bed camera and PVM camera still work great! The 360 camera has nothing to do with the 3rd brake light cameras

 

Got my 295/70/18 AT3Ws installed. Pretty happy with how they look/ride.

 

What psi are you running em @?

 

I think they put them at 37/38 psi. I drove home and parked it. I will check it out tomorrow. I have only had the truck for a week and 400 miles. Not sure what is good/bad yet. The dealer did “correct” my alignment while there. It looks like there is still a good bit of positive camber still. I think I am going to do a Firestone lifetime alignment and be done with it.

 

Don't do that, you need a shop that knows what they're doing.
Your + camber is insane. Get it to 0.0 with high caster or even negative.
Check out my post on the TRD Pro alignment here:
https://www.tundras.com/threads/trd-pro-alignment.126131/#post-3223239

 

Finally got my westcott sliders...now to make time to install them.

 

You’re supposed to leave those bastards

 

What steps did you take to make removing the decals easy?

 

This is a great way to do this. All the badges on are this way right, so this can be used to take any of them off?

 

You not a fan?

 

S&B intake and aFe Charge Pipes installed yesterday.. wasn't too bad and video from S&B helped. Needed some lube for the breather hoses onto the charge pipes but not too bad all around.

 

Sweet! Mine is delivered today!

 

What does the butt dyno say?! How’s she pull?
I feel like your missing a JB4!

 

Initial throttle response seemed quicker, but that could just be from computer reset after unhooking battery.

As for the JB4 .. look closely .. it's not missing!

 

Door moldings, yes. I think the hood badges have holes (I dont have these on my truck)

 

Nice. I'm waiting for the afe scorcher for the hybrid. They told me like a month out.

 

You're selling kits for me left and right! Appreciate you dude!

 

prototyping has paid for itself at this point!