Official Tundra Wheel and Tire Setups - Pics and Info

Love icon rebounds so much I have two sets of them.

 

Really digging these! Looks great! Love it against the white. Thanks for the pic.

 

Actually did the BMC a few months ago. I’m just late to the game with updates.

 

Method MR318 Gloss Black +40mm
Toyo Open Country A/T3 LT275/65R18 C
Stock suspension, no spacers.

About .5" outside the fenders.

 

18 X 9 Fuel Quakes, 285 70 18

 

Got it done and love it! Method 316's +25 offset 17's...Toyo AT3 35 12.5 17....sits so pretty! No body mount chop!

 

A while back, my dad upgraded from the 2002 to a 2003 Tundra. This thread was a great help in finding a +2 wheel setup for him. He went from the stock 265/70-16 to 265/60-18 wheels from a 2015 Lexus GX460. Here's the comparison that shows there is just a 10mm difference in offset and a width increase of just 0.5". We haven't detected any interference.

Toyota | Lexus
Lugs : 6 | 6
Style : 5 Spoke | 6 Spoke
Offset : 15mm | 25mm
Width : 7 | 7.5
Diameter : 16” | 18"
Dimension: 16”x7” | 18"x7.5"

Here are some photos:


We took it out to compare the indicated speed against a GPS and the difference is roughly +1 MPH from 30 MPH to 70 MPH.

The only problem is that the Lexus center caps don't fit over the original Tundra lug nuts. I was hoping that @shoe07 would share what he did to get the center caps to fit and how he got the Toyota logo on them.

 

Fuel Maverick 18×9's with 0 offset and 295/70/18 Nitto Ridge Grapplers

 

Specs on the wheels and tires.

 

I know people ask occasionally, so here you go. 295/70/18 tires should fit without any lift using stock offset wheels. I did remove the front mudflaps, but I did that way prior to even thinking about trying to put these wheels on. Otherwise, fit great, no rubbing. This is a TRD Sport 4x4, 100% stock suspension.
*I do have aftermarket skid plates.

 

Time to get it dirty

 

I can do some milderish stuff for now at least.

Suspension will be coming, probably when it cools off. And, got to get my sliders and gas tank skid on, too. Again, probably won't happen until fall. Too damn hot!

 

I used a soldering iron on its lowest setting with a tip I never use for actual soldering and melted the tabs on the lexus emblems and pulled them off. I filled the holes, sanded / primed / painted and got stick on toyota emblems from Amazon.

I don't think I prepped well enough as the paint is starting to crack. Plan to redo them this winter or next spring.

 

285/45/22's
Black Rhino Traverse wheels

 

I'm normally not a fan of 22's on a truck, but that has a super clean 'street' look to it

 

35x11.50/18
Falken Wildpeak R/T tires.

 

This was my 2010 that i still miss to this day, i just lifted to high for what i needed to use for, 7" lift with 35" Nitto's and CHROME Moto Metals. I miss Chrome But im also an old fart. i would put Chrome wheels on my 2020 if i could find some that looked decent (hard to find)

 

Great looking truck!

 

Got my Method MR705s on last week. 17x8.5 +35 with 37x12.5r17 BFG KO2s.

 

how much / what kind of lift?

looks great!

 

Thanks! I installed Icon 2.5 non-resi's up front. It was right at 2.5" of lift. In the rear I went installed Toyo Tec shackles on the highest setting, after fighting with leaf spring bushings for too long. Icon 2.5s in the rear with piggyback adjustable piggybacks hoping to be able to dial in the depending on the load/towing setup. I don't have my notes in front of me so I can't remember how much lift the shackles gave me in the rear but I'll check when I get home tomorrow.

 

Icon Vector 5 17x8.5 +25. Wildpeak 285/70/17

 

Fuel Vectors 18x9R18 w/+19 offset
Nitto Ridgegrapplers 35x12.50x18
2023 Tundra SR 4x4
Rough Country 3.5” Lift (NO RUB)

 

If you are ever thinking of selling wheels, please let me know. Longshot - but if you do...please keep me in mind.

 

'16 1794 Edition
Low Range Offroad 3/1 leveling kit.
285/65/20 Venom Power Terra Hunter R/Ts on stock wheels.

 

Beautiful setup! How much poke are you getting?

 

chrome needs to come back lol

 

Nice! What are you running as far as lift, wheel size and offset? I've considered going up on mine (currently 35x12.50s with room). I have a 6" front/4" rear Fabtech lift.