WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

It may be that you could add the pieces you want to make the DB cover work for you.

I am on my second cover (second truck with a cover) and have the Kayak racks installed and will be adding a set of cross bars for the bikes. You can do a-lot with these covers. DB also sells a ton of add ons and boxes!

 

I've been deciding the route to go with the Tundra for almost a year now. I have a cab height canopy on my Tacoma but wanted to go without it this time to keep camera and roll down window usable. For what I carry in the bed all the time the options are very limited so I just narrowed it down to these two I mentioned.

 

Installed oe marker lights for the heritage grill. Here’s everything I bought for the install
Marker lights:
https://www.ebay.com/itm/2758190103...GBwmlU0RTq&var=&widget_ver=artemis&media=COPY

Screws 90167-50063 X2
Clips 90467-07217 X4

Connector to marker lights:
https://www.napaonline.com/en/p/ECHEC2725

Fuse jumper(micro) for hot:

MuHize 4 Types 12V Add-a-Circuit Adapter and Fuse Kit - Fuse Tap Fuse Holder with MICRO2 Mini ATC ATS Low Profile Tap dapter for Cars Trucks Boats (12 Pack)

$10 MuHize Fuse Taps - Upgraded 12V Add-a-Circuit Adapter and Fuse Kit(2024 New), 4 Types Fuse Tap with Standard Micro2 Mini ATC ATS Low Profile Fuse Adapter for Cars Trucks Boats (12 Pack)

https://www.amazon.com/dp/B085MGP931

Misc automotive wiring and one ring terminal for ground to body(had that laying around)

 

Installed a Talon's Garage Powder Coated carbon steel Cat Shield today weighing in at 38.6 pounds. Used a Craftsman ATV jack to position the Shield making it easy to install the tamper proof bolts:

 

Installed my Peragon bed cover between the rain showers. Seems to be well built

 

Got some 295/70/18 Cooper at3 XLT tires installed on my otherwise stock TRD OR. No rub on normal street driving, even with mud flaps. Very happy with these tires.

 

did the powder coat chip at all? We have a huge disclaimer but are not getting a ton of feedback so we are hoping that is good news!

 

I’ve got pics on my build thread, if you want to see it in use for the 3rd Gen. The pics are when I installed my swing cases, but you can see the bed rug. I really like it. First time I’ve used one and I’ve been impressed. It has this ability to make loading easy by allowing things to slide but they don’t slide around while driving/turning, if that makes sense. I’m sold on them.

https://www.tundras.com/threads/dus...he-daily-do-it-all.110886/page-2#post-3085459

 

I'm liking this bed cover. One question, what happens if there's a load shift from hard braking that moves cargo to the front of the bed? Do you have to crawl under it to shift the cargo back to open the cover?

 

Looking good. They look pretty squared up. Any chance you can post a shot at more of an angle to show how much the tires balloon?

 

I'm a satisfied customer!

Purchased Talons Garage Powder Coated carbon steel Cat Shield for a discount with possible powder coat issues as stated on their website. Before installation I inspected the shield only finding one small 1/4" powder coat blemish on the transmission side of the shield where it was bent in a brake before powder coating that can be easily touched up with black paint. The bottom of the shield is perfect as seen in my photo.

Could not believe how fast you shipped the shield. On the same week I ordered it, received it and had the shield installed. Your link with instructions were great. The fit was perfect and easy installation for this 67 year old in the driveway with the Tundra on ramps.

Been looking on your website, do you have a Cat Shield for a 2003 2.4L Base model Tacoma?

Thanks!

 

Hopefully this helps a bit. This is at about 40 psi. Less bulge than you would expect on a 7.5" wheel.

 

DeBadge

 

Thanks for that. I like it. Pretty squared up even on the 7.5” wheel. I have the exact same truck as you and will keeping the stock wheels and going with the Coopers in this size when I’m ready.

 

Nice looking truck! I’m liking the debadge look, did you do it or have it done?

btw, I’m in 802 as well!

 

This cover folds downward.would have to if the load slid all the way to the front where the cover sit when opened. With the spray in liner I wouldn’t think much would slide unless you braked pretty hard.
https://youtu.be/-9BAHhAKSY4

 

Thanks,

I did it, super easy

 

Nothing for that generation of Tacoma.

glad you are happy with the shield!

 

You'll love them. At 40 psi, the difference in ride quality is minimal. I'm 100% happy with these tires this far.

 

I picked up my truck about 6 weeks ago, and added some stuff. Thought I'd finally break down and share! This entire site has been an inspiration and helped so much! Thanks everyone!

 

Has anyone put 295/60/20 on stock wheels? Wondering about rub.

 

Installed Rhino crossbars over the Retrax today

 

Happy to hear that. That’s surprising considering they are E load rated.

 

I took my flat black plastic fender flares off - getting ready to put the new Pro flares on. I am going to post them in the classified section soon.

I took my Timbren's out and put the OE bump stop back in, the ride should be much better!

 

Added lights and a gauge to my truck.

 

Bought some spotless rinse setups. I need the extra working time in the summer heat

 

I’m running the same size on my truck on stock TRD wheels. No rubbing here
But I also have the TRD lift installed

 

I'm talking about stock no lift.

 

Looks like the RC bumper. How was the install and thoughts on the quality?

 

I have a midnight black and have been looking for the red TRD letters to fit the grill inlay. That looks awesome. Where did you get the letters?