Anyway to have NSV bulge light bar to come on with high beams and fog lights

I'm wanting to snag a NSV Bulge light bar up on Headlight Revolution Black Friday sale. From reading and researching that you can't have the NSV Bulge light bar come on with the high beams and fog lights. Has anybody been able yo or know hot to have the NSV Bulge light bar come on with the high beam and fog lights? If so please let me know, wanted to know before I pull the trigger. Thanks

 

I'm sure there are options, but the only way I am familiar with this function is a SwitchPro. I DO NOT have my setup wired this way, however essentially you can tap in to the high beam trigger as an input and run up to 4 outputs off this action. I'm assuming you'd have to run the fog lights to the switch pros outside of the OEM wiring harness completely. You can call them up and ask them specifically. Their Customer service is on point.

All systems include:

• 100 User-selectable switch legends (not shown)
• Eight user-programmable switches
• Four 35A circuits and four 20A circuits
• Waterproof, Solid State 125A Power Module
• RGB Backlighting provides unlimited color options, using Color Picker on App
• Daisy Chain up to 3 Switch Panels to One Power Module to allow control of your 8 outputs from up to 3 locations on your vehicle
• Switches can be programmed for:
  • On/Off or Momentary
  • Ignition or Battery Input
  • Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
  • Memory Function
  • Master Mode, with ability to turn multiple outputs On AND Off with one touch
  • Automatic Power-Up upon vehicle start up
• Two External trigger inputs can each activate up to four outputs (Active High or Active Low)
• Lighting outputs can dim from 100% to 10%, with ability to dim during Flash or Strobe patterns
• Sleep Mode for minimal power consumption
• Color Coded circuit wires
• LED Input Status Indicators for easy troubleshooting
• Time Delay Off function available for all circuits
• Splash proof switch panel with Polycarbonate overlay faceplate
• Program and control the system from switch panel pad or smart phone
• Bluetooth interface with FREE Apple or Android App
• Battery Voltage Readout on App screen
• No Fuses or Bulky Relay box
• Built-In Bluetooth Module

 

High beams and fog lights won’t be on at the same time due to DOT regulations. I would also think an off road light would be illegal while on road, which would mean you need a separate switch.

 

Yeah I'd be using this for driving in the woods and on country roads and would like to also like to tie in with the automatic high-beams. I had the Bright Box Anytime in my Tacoma and it worked great.

 

I'm hoping to do this as well. I have a lightbar in my lower bumper, currently on its own switch. I would like it to come on and off with the auto high beams, but only when the lightbar switch is in the "on" position. I'm thinking I can accomplish this using a relay on the high beam fuse to the lightbar switch.

 

I purchased the NSV light bar from HR last Black Friday (2021) and it will come on with the High Beams (but not when on 'Auto'). To get the fog lights to come on when on your High Beams, I've been looking at the Brite Box based on another thread.

 

I have a 42" bar behind the grille and a 32 in the bumper. I can run them with highbeams but no sense in doing that because I would not even know the high beams were on.