What have you done to your 2.5 gen Tundra today?

Cant wait to see the new look. What LED did you go with?
Are the 3M film exact fit?

 

I got the front and back VLED kit. https://hotshotoffroad.com/collections/2014-tundra/products/footwell-led-light-kit-07-21-tundra . You also can pick them up from VLEDs website. I got mine on a the black Friday discount at VLED. Hotshot is a little bit higher but they don’t charge shipping or tax so I think it come out about the same. I still have to tune my lights in. Right now they are a little too bright when driving. I didn’t have anyone to hold the door switch in for me so I had to just guess at it. The dimmer is pretty sensitive so I gave up until I can get some help.

 

Trd pro, and ihacker setup. Don’t think it will be the exact fit ones. I could have ordered them but didn’t want to wait.

 

Most of the precut films only cover the front of the lens. I have the XBs and I had my local shop PPF them, and they had to manually cut a piece for the top. I requested that because the top is usually where the lens fading starts.

 

Finished my Chrome delete with bumpershellz grille surround, hood bulge, and bumper caps in matte black. Interior is chrome deleted with AJT parts and color matched Tufskinz for the climate rings. I’ve had the Rough Country rear bumper for over a year now. And finally installed Rough Country 2” leveling struts and N3 rear shocks over the weekend.

 

can you take a couple more pics need top and front view

 

Joined the "Red Hook" neighborhood

Also received my early Christmas present. I love this beefy multi-functional sumbeech...recovery point, step, LED mounting point (already have LED's back there though), protection in reverse when my dumbass isn't paying attention, and impact absorber in a rear-ending situation. There is a con...I see my clumsy ass busting a shin or two



Here's the link for the hitch skid only:

$195 Supreme Suspensions - Heavy-Duty Multi-Function Hitch Skid Plate with D-Ring Shackle Mount | Universal Fit: Compatible with Any Standard 2" Hitch Receiver - Mystery Box Included with Purchase

https://www.amazon.com/Supreme-Suspensions-Heavy-Duty-Multi-Function-Compatible/dp/B0949KK4P6?keywords=supreme+suspensions+hitch+skid&qid=1670423725&sprefix=supreme+suspensions+hitch%2Caps%2C187&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.fa474cd8-6dfc-4bad-a280-890f5a4e2f90

 

Turned 55000 this morning(started rolling 2/20). Here’s to another 155k.

 

Throttle controllers do not increase horsepower and should not impact 0-60 times. The just change the throttle map, you set it to increase sensitivity so it is feeding more gas with less peddle, meaning you hit wide open earlier.

 

Hmmm..."earlier" to me translates to quicker...

Sounds to me like we need a real world test...I have a Pedal Commander...who wants to drag race their Tundra with mine on the Cooper River bridge near Charleston?

 

Can you do a with vs without with a Dragy? That would be 100 percent apples to apples comparison.

 

Agreed, we need actual times and real world testing.

 

Put ~500 miles on it yesterday
And a heavy coating of central oregon red road sand.
Needs a bath pretty bad.

 

AT3W LT275/70R18. I think it's time to give her a bath!

 

Yes, I know it’s December, cold out and snow on the ground. I just had to wash it.

 

Stock suspension?

 

Yep, no level or lift yet...

 

Be careful with these. I had a buddy who nearly lost a finger thanks to these door jam closers. Didn’t pull his hand out in time while closing the door…you can use your imagination for the outcome.

 

Added a console cover to protect the lid from my dog's claws. The lid shuts as it should. There's three elastic straps to hold the cover to the lid. Once it warms up a bit, I'll stretch it out.

 

Today on random OCD winter work. I heatshrunk the clamps holding the remote resi’s.

 

Cheetos are tasty!

 

Added those RCI cat protector wings to the skids. Did not like that they replaced skid shoe bolts with hex drive bolts, so I used the skid shoe bolts and forgoed the bracket with speed clips they provided...man it was hard getting a wrench in there to tighten those nuts but got it done.

Not really excited about these cat guards in particular, just looks incomplete. I hope they save me from headache down the road.

 

That's the reason I don't get why they are a great idea if you have little kids..

Edit - I like the concept though

 

Made the switch. Huge improvement, and pretty easy install.

 

I didn’t like the chrome on my truck or on a lot of trucks, but it looks so good here for some reason.

 

"Made the switch..." to LED headlights? To yellow fogs? To only coming out in the dark? To only making ambiguous posts? To an alternate lifestyle? Inquiring minds want to know.

 

LED headlights from looking at past quotes

 

Ah yes, I did look back then to see the pic with the light out and about the PPF on the new ones. Very cool indeed. I am jealous of that switch. Mine desperately needs the ihacker harness/LED headlight upgrade.

 

Fingerprints on the outside of the door. People when they get out of the truck

Not sure if these are what you are looking for? If not I’m sure @2020Platinum may have some not on a truck. The top two are of the front doors and the bottom two are of the back doors

 

Not sure if this well help the forum or not. I ordered and installed a

$25 CK Formula 60" LED Tailgate Light Bar for Trucks Double Row - Tailgate Light Strip, Red Turn Signal, Double Flash, Brake, Running, White Reverse Light, Truck Accessories, 1 Pack

60" Double Row LED Tailgate Light Bar from CK Formula (Amazon) today. It came with a 4-Pin connector and separate wire that was spliced directly into the reverse wire of one of the tail lights. I wanted to hardwire the 4-Pin wires into the 7-Pin harness that was under the truck. Below are some pictures of the original 4-Pin connector, my wiring diagrams and some pictures.

Original 4-Pin connector



4-Pin Wire Diagram



Truck 4-Pin / 7-Pin Connector



7-Pin Wiring Diagram (Looking at Back of Truck)



7-Pin Wiring Diagram (Under Truck)