What have you done to your 2.5 gen Tundra today?

There was some on the bottom part of the chrome that help hold the grill on. They slid on the C- shape holder. Same for the bulge. Those clips/fasteners pop on and off the body of the truck. Some of them were ok, some not. You won’t know how many you need if any until you take the bulge and grill assembly off.

 

So if I’m getting a new Grille and bulge, I shouldn’t need any since it comes with new ones (I’m assuming)

 

I attached my build sheet. I wanted the frameless stuff because of how clean it looks but read too many mixed reviews. This is the same top I had on my tacoma except this one has a front fold down window so I can keep my truck clean and pass stuff through if I ever need to. I love having full access on both side.

 

I had a to get one clip/fastener for each of my taillights when I upgraded them. Maybe being a 2014, stuffs starting to age and getting fragile. Duno.

 

Pretty sure they won't come with any

 

My grill didn’t. My hood bulge came with screws to use where I had to ground down the plastic welds. I went to the dealership to get the clips/fasteners.

 

This is what they look like.

 

You can just order a set of car clips/misc pieces etc for fairly cheap, always good to have on hand:

$16 ANTS PART 330Pcs 12Sizes Car Plastic Rivets Fasteners Push Type Pin Rivets Clips Trim Kit for Ford Honda GM Acura Chrysler ETE

https://www.amazon.com/Diking-330Pc...lips,aps,130&sr=8-1-spons&smid=A2H2GLZJS0U7K0

 

Your grill should come with other hardware to attach it to your truck. But you do need to reuse some of the original hardware too.

 

Thanks. The center caps looked gray, and not bronze in the picture, so I thought I'd ask. Great looking wheels!

 

Think I ordered this exact kit and ended up not using most of it lol hardly any Tundra pcs in there

 

Yes they are. I changed the oil in my wife’s Corolla last week. I had to replace one of them button type fastener on the splash guard into the bumper.

 

If you’re talking about the OEM grill and hood bulge they come with all new clips. I just replaced my SR5 grill and bulge with a TRD Sport grill and it came with all new clips already installed. I did have to reuse the bolts for the bulge.

 

My grill and hood bulge light is after market. Rough Country.

 

They come with new clips.

 

Mine did.....

 

After driving around for a couple days with one side white and the other black, trying to decide if I liked the painted white or non painted black bumper end better...

 

Bought them used actually, someone moved up to 20" wheels. Had to go out of state to get them but they fit the Tundra so well, totally worth it.

 

Mine has been very accommodating to all my recent purchases...hmm, maybe I should be worried. lol

 

Ultimately, personal preference, but I would’ve painted the center [black plastic] portion white to color-key/match the outer portions of your front bumper. I loved how my Tacoma w/ TRD Sport package had color-matched bumpers, front & rear. Color-matching any black plastic costs more than leaving plastic unpainted, and looks nicer to me. But again, personal preference. I have chrome outers, and black plastic inner (center portion), and my goal is to paint the black center plastic silver like the 1794s come.

 

Had an overcast, and setting was just right for a shot of the Raptor Led lights. (Recently installed)



Diode Dynamics SS2 led pod lights. Setup as a brake light, turn signal, hazard, and reverse using a Putco trailer harness. I wish the back light lit up when lights are turned on. If anyone knows how to wire these to stay lit up when headlights are turned on, let me know. Would appreciate it.



Could have done a flush mount to the bumper, but didn't feel comfortable cutting. I'll just keep them in the bed for now. Good thing about it,
you can detached the harness behind the light, and setup a chase light or other lights.

 

I say do the color match. It will look much cleaner. Mine were chrome when I bought the truck.

 

I think that I actually like it better all white too but have spent WAAAY too much $$ on it lately and I want to have that done professionally so that it matches and holds up. I am definitely keeping the white ends and will do the all white at some point in the future when I run out of other stuff to change probably.

 

Working on a new emblem.....not paying $200 for one. 3d printed. Found the design on thingiverse and just had to adjust the sise to fit. I plan on sanding and primering it then color matching it with the carbon fiber backer plate.

 

Now that is bad ass! You need a Yota Mafia decal for that idea.

 

That would look good on the grille hole cover i need to order.

 

Pm sent