2021 Limited suspension

Had the truck since March. Been doing a lot of research on coilovers and such. Here’s my plan. My only concern is the UCA’s and clearance of the tires. I want to fit 35’s x 12.5 R20. What would be a good offset to clear the UCA’s. If I’m missing anything or you want to add any input, that would be great.

Front: Fox 2.5 with RR & DSC
UCA: Icon or Camburg
Rear: 2.5 with RR & DSC
Differential drop
Carrier bearing drop
Coach builder 3” shackles
BMC if needed

 

u will probably need a little more lift , like a shim or something, factory wheels are usually plus 60 , so most people on here go with like a plus 25 or 35. Brand of tire also makes a difference. Front bumper shims help also.

 

Thanks. I was going to do a bumper shim as well. The only real concern I had was with the UCA’s. I prefer not to us a shim on the wheel.

 

Good planning, plus the offset on your wheel choice will be a factor... Most 2.5-3.5" Coilovers lifts is a easy front flap removal and some heat on the front wheel well plastic, as in my case with a Toytec 3.5" aluma serie lift, with all the support listing you gave. I went with JBA's UCA, Vision wheels +25, Wildpeaks295/70/18s and sits perfectly...
Good luck and post pixs when completed!!

 

That tire will not clear the uca on factory wheels. You’ll need spacers or new, lower offset wheels.

 

Thanks. I will post pics for sure. It might be awhile. I’m ordering everything and once it all comes in, will have it installed.

 

I will be adding new Fuels in 20” size just not sure which ones yet.

 

drop wheel size will provide better ride and if going above 2.5 i would do UCA. I went 2.5 6112 shocks but then dropped down to 1.9 for better ride. Plus truck was too high. I used SPC UCA just to be safe. They do stick out further than stock UCA.