What have you done to your 2nd gen Tundra today?

The quest for all white light continues


next up, morimoto tag lights

 

Hit 82k miles and finally changed out the oem rotors and pads, went with powerstop and drilled slotted rotors

 

Finally got around to installing the Limited gauge cluster I got to replace my SR5 cluster. I love it, it looks great.

Took me awhile to find the little clips holding the fabric around the steering column onto the cluster bezel. That piece didnt make it back on when I reinstalled. I couldn't get my booger hooks back in there.

I also disabled the TPMS light that has been on for almost 6 months now.

 

The only thing that I don't like about mine is that I can't turn down the brightness enough, I like it dim. One neat thing now though is that if you also have the info buttons on the right side of the dash, you can change some other lighting settings that would normally require Techstream to change. I'm sure that you can figure them out once you get to poking around a little.

 

Which settings?

I dont have those buttons. I read a while back about it. Sounded like they give you mpg and range data. Wasnt worth the $125 to me.

 

I don't have a complete recollection, but settings like how long the map lights remain on after unlock, how long they stay on after you turn the engine off. I'll try to refresh my memory the next time I need to go somewhere.

 

Hmm, sounds similar to the info buttons on a GM.

 

Where did you get that grill? I am Digging it man!

 

https://www.tundras.com/threads/2020-sequoia-trd-pro-grill-conversion.55533/

 

In the shop getting Nitro 5.29 gears and Auburn Pro lsd. Should be done on Tuesday.

 

going under the knife next week at work...

 

nice overland truck !

 

Settled in to the new house. Baby due on January 2nd. Snuck in a little work on the yumdra lol. Took off the Aries bull bar, switched over some bulbs back to halogen from the LEDs I got from Amazon. From this YouTube video https://youtu.be/1ruTyuD68fc cheaper LEDs don’t penetrate like halogen. I live in the California foothills. Back to halogen is way better! Ordered yellow film tint that I’m going to put on the ditch light lenses next.

 

Looking good..Congratulations on the new house and most importantly the new baby!

 

What's your setup? looks nice hope mine looks some what like that when i am done...

 

Thank you. We are really excited!

 

I know you’ve probably been told this...enjoy ever moment! Time flies!! Them little buggars grow up fast!

 

I added a steering wheel spinner... the goat is a tractor now after all.



But honestly, the next best upgrade since the plow. If you have a plow, you need a wheel spinner too.

 

Oh, the goat also shedded its rack. Need to make some mods to the rack. I also plan on building a rear spare tire mount. I will fab a frame-to-bed mount bracket that runs to each bed/frame bolt at the rear of the bed floor. I’ll weld a nut to receive the spare wheel retainer key in the center on the bracket and call it a day.
Overall, I hope to gain some rear weight ballast for plowing and winter driving.

 

Whaaaaaatttttt. Found a new project...

 

Red Steel bumper by FabFour is now bolted up.

 

I drilled some holes in my roof yesterday.. Installed m4 nutserts for a factoryish install of these amber leds. Started wiring, I got 12 wires pulled from under dash (enough tail to clear firewall and make the relay box) up to the newly added overhead console switch panel. More to come as the wiring continues.
Ps: I used the right stuff again in this job, I ran a bead around the bottom edges and also the screw heads.

 

They look kinda like a computer mouse...

 

Oh that’s what they are. Amber underlit mice.

 

Since I have time off starting tomorrow, I think I'll bring the Tundra into the garage tonight for the long awaited, much needed ECGS bushing install.

 

Got the 3 inch leveling kit and Nitto Terra Grapplers 295/70/18 installed. Stock wheels.
Re-paint the grille in the Spring and I will add fender flares too.

 

Wife said she needed to drop the truck off at the local shop. When we went to pick it up the next day she had new airlift suspension in the rear. Merry Christmas too me

So put on the Winter tires and gave her a well deserved bath to clean off the road grime. Wife says one more add on coming so will post pics after it is installed .

 

She’s a keeper!!

 

Most definitely

 

Weight reduction mod.

Was pulling the trailer when all of a sudden I hear a nasty grinding noise. Finally found this completely loose heat shield sitting on top of the driveshaft.