What have you done to your 2.5 gen Tundra today?

I got almost done with installing the DD 8” but decided I’d better buy new bolts before finishing I snapped the one on the clamp and was shearing the heads on the others. Hopefully they’re in stock at the local dealership tomorrow.

 

Hard to tell from that image but the light bars do seem higher / closer to the horns than when I did mine.

 

Finished up the on-board compressor. Ran the air line to the rear bumper so I don’t have an air line hanging out from the hood when I air up. Pressure switch keeps the compressor running only when air is needed. Pop the hood for cooling the compressor, hit the switch, attach the line to the bumper and air up. Done. Decided against the in-cab switch, since I gotta pop the hood anyway. This

$164 Smittybilt 2781 Smittybilt 5.65 CFM Air Compressor - 2781

Smittybilt 2781 compressor fills up the tires so fast. Highly recommended!!

 

Test fitted my new roof rack system. Will be the first truck in USA with it. Excited.

Waiting on new RadarMount for the Escort and wiring kit to mount from rearview mirror tomorrow and my center console divider.

 

Installed BedRug today. Took a bit longer than I planned with the rail system, but I thought it looked pretty good once done.

 

No. Mine required extensions to be added to fit in the space. Have the same brackets you’re showing.

 

The work is done.
5.5 hours sanding (by myself)
.5 primer, adhesion, degreasing
1 hour masking and covering truck
.5 spraying liner
Total material cost 160$
Line-X quoted me 750$

I would recommend the product. Just make sure you prep your bed. Only time consuming part. Using a grinding wheel, and wire brush and go to town on it. The rougher the better.

 

Nothing to crazy, but happy with the small addition of blue!
Pardon the dirty wheels. Lot of driving lately and haven't given it a wash in awhile.

Edit: these are ColorLugs

 

So got the headunit in. And heated seat switches in. And fixed my climate control knobs. And rear door speakers. Need to finish setting up
Headunit tomorow but this thing is fast, good picture, and sounds great and wireless CarPlay

 

Head unit worth it? Opted out of buying this one since I can stream XM via Bluetooth on my phone.

 

Idk I ran out of time today so just wanted to have music. Will mess with everything more tomorow but it seems like it works great and worth it. It’s a

$1,000 Kenwood dmx1037s 10.1" High Definition Car Stereo Receiver with Capacitive Touch Panel

Kenwood dmx1037s. Sirius radio was a must for me. Wireless CarPlay is nice also. I had the Tesla unit for about 2 weeks and sold it. This is night and day from that. And also I think it looks great

 

Great job! Raptor liner is tough stuff.

 

Installed the Mountain Hatch



After I put it on though, my tonneau cover wouldn't latch because the rails end really close to the inside of tailgate. So I took it off to either sell it or wait til I get a GFC, then put it back on.

 

What an awesome score, those are definitely hard to come by. Probably gone by now.

 

That's cool. Link and description of what it does?

 

mountainhatch.org

Basically a camp table/cutting board thingamajig

 

that looks slick, but what is the purpose out of curiosity? Will it act as a table and what not for you while camping?

 

Welp disregard should have kept reading

 

Added LED lights to the grille. Wired them up to come on with the DRL's. Thanks for the idea, @BlueBottle!!

#Makeambergreatagain

 

yeah, pretty much.
just a coolness factor....lol

 

I respect it, makes it easier and cooler than carrying around a folding table!

 

What lights did you use? I think this is my next project.

 

Installed my faux Pro Grille.

 

Well, with a military discount I got four wheels and lugs for less than what just the wheels would have cost from SCS after shipping. Their asking price was $285 for the Ray 10s, not sure on the SR8s. I think they're $265 at SCS, plus shipping.
$1190 OTD with lugs, I couldn't say no!

 

Yep, you're exactly right! In an attempt to not be too impulsive, we checked what they had in stock and then I told them I was going to look at pics on the internet and then decide what model and color I wanted. My son and I started Googling on our phones as we were walking out to the parking lot, then sat in the truck for about 5 minutes looking at the different colors and styles on a SSM crewmax.
I shut the truck off and went right back in and got 'em!
Didn't even make it out of the parking lot, but at least it wasn't an impulse buy, haha!

Getting new tires mounted up on Wednesday, Cooper AT3 XLTs in 275/70/18.
Still debating on suspension but should have that sorted in a few weeks.

 

Have you thought about painting the center "T" on the center cap blue?

I did MGM, but I also had the rims powdered coated MGM and left the center cap black.

 

Wired up some LED lights today. They fade on/off with the interior cab lights. Definitely love the look, this site is wonderful for ideas!

 

I used these. They fit the spaces in the Pro grille perfectly and they're very high quality.

$10 GG Grand General 77650 Amber Thin Line 6-LED Marker and Clearance Sealed Light, Amber/Amber

https://smile.amazon.com/dp/B00ECTQNF6/ref=cm_sw_r_cp_apa_fabc_4ma4Fb7QY3NN4?_encoding=UTF8&psc=1

 

Where did you find those?