What have you done to your 2.5 gen Tundra today?

So I updated my console with a couple of things....

 

Wife got me the black TRD pro shift knob for Xmas.

 

Hopefully!I scuffed it down real good and put 3coats of black rocker gaurd on it.. seems like pretty tough stuff but we'll see I guess.

 

Nice, what bar is that?

 

Washed it with what, a harnessing and scaffolding system?


Sick nasty rig!

 

I need to know more about these mods. I am new here, looking for ideas, these seem to be high on my list for now.

 

Welcome from NY.

You can start here...

https://www.tundras.com/threads/diy-mods-tutorials.257/

 

Well, it's all in these forums. Lots of knowledge and of course, opinions. Just start asking questions. Welcome to the forum.

 

Visit this site, has vent ring covers and knobs and cup holder and shifter surrounds.

https://www.ajtdesign-llc.com/

 

Thank you

 

You betcha!! Let us know how else we can help you spend money!!

 

Jim, I ordered the one in this video and followed a lot of their steps.
https://youtu.be/xO96NngJq7w

 

Any gaps?

 

Where did you get them?

 

Painted the tow hooks Cherry Red.....really like this pic

 

It's rail dust, and I have a small amount on the top of my truck. I bought a product called Iron Free, but have yet to use it...

 

Go to the detailing section. There is tonnes there and I've learned a lot from those guys.

Quick and easy answer is spray on something like CarPro's Iron X (not sure if how similar the Iron Free you mention is to the CarPro version but I'm assuming it's close) and let it sit for a few minutes. Spray off and then decontaminate with clay, then wash. Then top coat as desired with a sealant or wax.

The Iron X reacts with the iron and dissolves it. You'll see it turn colour which tells you it's reacting. That gets rid of it. You clay to smooth out the paint and removes non-ferrous contaminates that are embedded in your paint and won't come out with a regular wash. Do this once or twice a year.

 

Amazon. $410 and free shipping.

 

Finally ordered my driver side grab handle from Sparks Parts, will be here in a week.

 

Added the Kenwood DMX906s and DRV-N520 dash cam. Shout out to James @Tech12Volt for the awesome deal and remote support on install.

 

The bulge fits on pretty well but at the corners a slight gap since its a tight fit. I know others have had issues in the past with worse gaps but i got it as best i could. As far as the gap on the bottom on the bulge edge to the light front surface, yes towards the center b/c that bulge edge is curved and the light is straight.

 

Installed the Coachbuilder bumper spacers.
...I know the easier way is to get underneath and remove & loosen the bumper nuts and slide each spacer in one at a time but I could not get my wrenches to fit in there and get the job done, so I took the long way around and pulled the entire front cover off

 

Installed a TRD skid plate I found from a local seller. Took a few weeks to get the right missing hardware because I had to order a few spherical washers from eBay. I couldn’t justify $90 for the hardware kit when all I needed was a few pieces. Found it all for about $17.

 

Thanks.
I'm thinking about buying that bar.
Can you take close pictures of it without the lights on?

 

Wheels and tires

 

Painted my tow hooks red

 

Did you paint your grill?

 

Yes plastic adhesion and SEM