Wheel recognition

Does anyone recognize this wheel and know the brand and backspacing?

 

Here you go.
https://www.customwheeloffset.com/buy-wheel-offset/372-8950MB25/vision-raptor-18x95-25?&year=2017&make=Toyota&model=Tundra&drive=4WD&bolt_patterns=5x5.91,5x150
I thought about these wheels, problem is there 9.5" wide. According to Custom Offsets they will fit.

 

Wow, thank you, that was fast!

What kind of problem does the width create?

 

Danno,
Saw in another thread you got these wheels.
Did everything work out good with them? 9.5" width didn't cause any issues with rubbing on the back of the wheel with steering/suspension components?
Did factory TPMS sensors fit?
A little info and a couple more pics if possible.
Truck looks good.

 

I have a friend with these, and he's running conservative width tires - 275/60/20, which are 33" in diameter but only 11" wide. No issues.

 

I got these from a friend who had them on a 2011, with tires and tpms sensors. I only rub when backing on the front tiny flap, so removed them. Tires are 285/65/18 and look good on the truck, only slightly larger than stock. I’m not lifted at all. Last oil change I asked them to sync the tpms sensors up with the ecu, that cost 80 bucks, but they had no problems, oil and sync done in less than 30 minutes.

 

Side shot (some free advertising removed)

 

Thanks,
I really like these wheels, just not the width, if they were a little narrower I'd already have them. I'm on 275/70-18 Cooper's and they spec to work with these wheels, just not sure how they would look.

 

@danno266. Nice setup! Can you post a pic that shows the offset? The 18x9.5's have a +25mm offset but I'm guessing it's more like a +18 from a 18x9 wheel? I'm not sure what the problem with a 9.5" rim would be over a 9. Any insight? Thanks!