Official Tundra Wheel and Tire Setups - Pics and Info

So they don't stick at all part fender flares? I just ordered same spacers and have same wheels and flares

 

Bilstein 5100 shocks front and rear, 18X9 Ultra 109SB +18 offset wheels and 33” Falken WildPeak A/T3W tires.

 

Fuel assault 20x9 +20 on 35x12.50

Edit: 3” toytec eibach kit with shackles set to 1.5” in the rear.

 

Finally got my Nittos on today. Had the lift on for quite a while now with my old 275/70r18 KO2's and they finally wore down enough for me to justify getting new ones.

Went for the 295/70r18s. Considered the 35X12.50s, but every pic I saw with those and my lift seemed to look a little too "stuffed" in the wheel well for my liking. The best thing about the new tires? My rig is quiet again. As I have mentioned in other posts, if those KO2s start wearing unevenly, they are loud as hell. It is nice to not have that noise now - I can just focus on the sweet tone of the exhaust.

Anyway, a couple of pics. My wheels are Moto Metal 951s with +30 offset. Lift is about 3.25/1.

 

Before as purchased. And after.... leveled, 275/65r20 Cooper AT3-XLT, predator steps and I had the fronts tinted to match rear windows after the pic. Sold my 2011 Rock Warrior for this upgrade. Love it.

 

Those 34s look nice! Those rims also have a +50 offset? Spacers used? Any rubbing? Would 35s squeeze in? Lol trying to keep my stock rims as well

 

I didn’t have to remove or cut anything. I will look again at skid plate. But never had any rubbing on the trip home. I would tell you 35s would fit based on other posts here. I think some cutting or mods would need to be done. As I know most are wider than these and that would make a difference. Overall diameter would have all kinds of room though.

 

Thanks for info

 

Nice! How do you like those Coopers? Any balancing issues?

 

There were not a lot of reviews online as the xlt is the new model. I’d run coopers before, but am a huge believer in the KO2 for Maine winters, thought I would give these a try. I couldn’t beat the price and saved over 300 vs bfg Ko2s. Overall I like the look of them and I think they will be just fine for winter. Watched the guys balance and install, and I didn’t see any huge issues. Very quiet ride on the way home! As Cooper said. And they have a great tread warranty as well. Will see what happens over time.

 

Thanks for the info. I had ordered the Cooper XLTs and am at the shop waiting on their install. Despite the glowing online reviews on some of the tire retail sites, I got a bit concerned after reading a few posts on here about balancing issues with Coopers. I had run the the older at3s on a 1st gen Tacoma several years back with no issues, though. Glad to hear you have no issues with the XLTs. Hope I have the same good luck after they put them on.

 

Method Con 6
18x9 +18 Offset
LT295/70R18 Toyo Open Country AT2.
Bilstein 6112/5160. 1.9" Setting up front.
Had to remove mud flaps, front air flaps, and I'm going to have to shim the bumper forward a bit.




Here's a shot of it the day I bought it.

 

Looks great.

 

thank you!

 

2018 CM
20x9 +25 Method
275/60/20 Falken Wildpeak A/T3W
Stock suspension

I had to remove the small mud? flap in front of the tires due to rubbing. Other than that they fit great. Due to the new offset, the tires are ~1in outside the fender. I would have liked 295s but wheels, 2x $$ tires, lift, fender flares were more than I wanted to spend all at once. And, I knew the 275/60/55s would fit with little to no issues. Down the road, I'll pick up a toytec lift. Overall I'm very happy. The guy at the tire shop gave me two big thumbs up. He loved the bronze/white, but he probably says that to all the girls.

 

Like a gloveeee

 

Did you regear?

 

i didnt at first but i currently have 4.88s sitting in my garage waiting to go in

 

What make/model tonneau cover do you have installed?

 

Lomax Hard Tri-Fold. I purchased it from truck alterations for $675 shipped. You'll have to email/call for that price.

 

Man I love that color.

 

I have Fuel wheels at +1 offset 5 mm backspacing 20x9, 3/1 suspension lift and +3 CB shackles. Tires are 275/65/R20 toyo at's which required BMC along with front bumper CoachBuilder spacers and front mudflap takeoffs for front clearance. Hope this helps anyone looking to mod their look.

 

I'm wanting to get these same wheels but run 255/80x 17 tires. I DO NOT want the tires to stick out passed the wheel wells. Do you think this would happen with the set up I want? I own a 2011 Tundra w/OUT fender flares.

 

What offset are those wheels?

 

+25

 

2015 DC. Bilstein 5100 top setting plus 2 shims per side. 2" block on rear for now. 35x11.50 Ridge Grapplers on 20x9 Fuel Nutz wheels. +1 offset.

 

Do you have any rubbing issues? I am looking at the Mayhem Rampage with a +18 offset and a 3/1 lift. Wondering if I may be able to squeeze some 35s! Bare minimum 305 55 20 but would like to go a little bigger if possible without a lot of running.

Thanks!

 

I was rubbing front bumper on both sides. I was able to just trim a little plastic and drill a new hole in it and re-secure about an inch forward. Hard to explain without pics but you can't tell anything has been cut. I also rub very slightly on driver side body mount in full reverse lock but not enough for me to do the mod to the mount.

I know someone that has a 3/1 procomp and he looked to be rubbing pretty good because he cut a noticeable chunk from the bumper. I am 3.5" higher in front than stock.

Offset will def play a huge role. I went with the +1 because I wanted more poke but I was too afraid to try the 20x10 -12 that I really wanted. I would have def scrubbed very bad. Overall I am happy with how it turned out. Once these tires wear out I will probably make a 35x12.50 work instead of the 11.50 that I have now.

 

What's the lift tho?

 

Toytec eibach kit with shackles at 1.5”.