Loose BD Fog Light

I noticed tonight my driver side fog light was not shining correctly. I went out to check the light and it dropped down about 1/2". I can grab the BD bezel and move it up and down. If I remember right the light is being held in place by OEM screw and mounting bracket. How do I securely mount the light so this doesn't happen again? I saw someone zip tied the light in place.

 

Might have been @BlueBottle . He suggested that when I told him my Morimotos were rattling all over the place.

 

Unless you have a different bracket I don’t remember mine mounting loosely. Do you have the fog kits?

 

It’s not the bd that’s lose. It’s probably the stock plastic housing. Yes zip tie it to the black bracket

 

Mark, I do have the mounting bracket. I did notice the plastic housing is loose. I will pull it all apart. It bugging the hell out of me.

 

Sorry about the issue with your kit. Here is a picture of how the BD bracket attaches to the Factory Fog Insert:


Sometimes the clips that hold the fog insert into the bumper can break causing the assembly to rattle or possibly fall off in extreme cases. I would recommend double checking the bracket orientation and the clips that hold the fog insert into the bumper. If for some reason any of your BD parts are missing please contact us at 800-422-5292.

-Bailey, Baja Designs
www.bajadesigns.com

 

I believe the BD bracket is fine. I think the blue clip might be the culprit. I won't know till I get in there. I do love the lights

 

Just in case it's the blue clip anyone know the part# or what it's called?

 

@Roman would probably know

 

Mark thanks I will send him a message if it's indeed the blue clip.

 

I just installed this kit and didn’t notice a blue clip on either side. Anyone have a pic?

 

Think the blue clip is only on 2016/17 Tundra if I remember right.

 

Hopefully someone has seen Zoolander...
This is how I feel right now....

 

Here's the blue clip.

https://parts.toyotaofcoolsprings.c...ip-753920r010/?c=aT04NDE4ODEwNSZyPWxheWVyXzE2

 

Roman, thanks for the part#. We are getting hammered with snow so it will be a few days before I can take a look.

 

Pulled the wheel well apart and the machine screw that holds the bracket came out. Only the outside screw was holding the light in place. Went to the local headwear store and bought 6mm machine screw, lock washer and removable thread lock. Won't come out now. Almost passed on the project today glad I didn't.

 

@Roman, quick question, what is the part number for the left and right fog light bezels (2017 1794)

Also, will the blue clips take up any of the play in the bezels?

I have the Morimoto fogs in the stock bezels

 

Subbing to this thread. I just ordered the blue clips today from Roman just in case, as I plan to install the 2018 LED fog lights. I previously zip tied them, but those blue clips are like $1.50 so it's worth a shot to see if it takes care of the looseness more cleanly than zip ties.

 

https://parts.toyotaofcoolsprings.com/oem-parts/toyota-lamp-bezel-with-fog-lamp-521280c070
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-lamp-bezel-with-fog-lamp-521270c070

The little blue clips are only for models with the plastic, painted bumpers. The chrome bumpers do not accept the clips.