Android Headunit

Same here I think that’s for the higher end model mine was just pushed into the dummy cover by the OEM usb aux port

 

Later today I will be taking the HU out to check a few things after I get the wife a new dishwasher, she will be going on strike soon.
AK I like the new theme can you still use it for heating and cooling the seats.

 

Here is a link for the newest update.

https://www.dropbox.com/s/ttfdffbek0ovu6u/update.img?dl=0

 

Do you know what that fixes or adds never mind that's the one posted on the 20th right?

 

so did you guys plug anything into this spot? @Fr0gburp3r

 

The black plug right over top of the white at the bottom plugs there

 

ohhh I plugged that black plug into the usb port I will switch it out and see if it makes any difference thanks @Moss01

 

You have to use the one from the Phoenix Android HU dropbox. I installed from the playstore and had same issue. if you watch the video a few pages back from youtube, he provides a link to that dropbox.

 

Finally change the boot up image.

 

@moss1 is correct, that black plug is for the HVAC..

 

yes I just took it out and noticed I had one wire still unlplugged I plugged it in and now the hvac in working fine thanks @Moss01 and @AK-in-MI question I have is when watching a video or Netflix how do I make it full screen if you see here in my pic you can still see the top and bottom of screen still shows options like the ac controls on bottom of screen ?

 

I attempted to retrieve the Developer Options password from the seller but they don't disclose that info to the consumer even though the unit is rightfully ours. I understand the liability but they should disclose the warranty limitations that exclude Developer Options manipulation. I was just trying to see if it had the fast boot up option like some Android devices do. Maybe it' in the internet somewhere.

 

I don't think they can be hidden. I wish we had an option of auto hiding and bring them back up with a press of any hard buttons.

 

Anyone have a similar setup from an audio perspective and if so what were your settings, I don’t think I am getting full frequencies from the HU:

My setup is from the HU, all PnP using the Taco Tunes PnP harness to an AudioControl DSP that is attached to an AudioControl 4-Channel amp and an AudioControl mono sub amp. I have lost all sound through rear speakers and sub and unable to get it back.

The AudioControl has a USB interface that I have yet to interface with to check the signal, in the interim thought I would ask if anyone had a similar setup.

I tried to reset the HU from settings – rest and it did nothing. For my setup I assume the Amp Power needs to be on/enabled, but I am unable to toggle that setting…

Thanks

 

@guyp2k I just installed my HU lastnite and I have 2 12" subs and the amp with separate bass control and they are all working fine I was concerned that they wouldn't work at first I couldn't hear anything from subs but once I adjusted the eq I noticed the subs were on

 

Yea, I enabled DSP for more control and I set that to 0/Flat. Wonder if that is the issue, all I need is a full signal to the AudioControl DSP and controlled from there...

 

What did you set the EQ to and did you enable DSP under advanced setting. Another issue bothering me, don't know where I may have enabled, every time a track changes, title and album name drop down from the top center, drives me crazy. Is that something specific to car launcher? Will uninstall and see if that is the issue.

 

Hey guys, someone needs one of your take offs. He's a cancer survivor. Someone do the right thing and sell it to him for cheap!!!

https://www.tundras.com/threads/help-with-broken-touch-screen.19076/#post-433618

 

Well I have good news, I don't have to do dishes anymore, $750 bucks down the drain. The bad news is I can't get my front speakers to fade out and the rears to increase. But more good news.

 

At -7 I can hear a pin drop in my truck.

 

Anyone having a similar problem with a limited, platinum, 1794?

 

I did check all the wiring, plugs. When's it's in the center all speakers work fine including the sub

 

I put it back together and started messing with the sub adjustments. Did no good and made me think something in the wiring crossed/wrong or the unit only uses 2 channels.

 

One thing that i found out on the AMP INFO adjustments is that if you crank the Cur Vol up to 62 the system comes alive big time (woke the wife up). Never expected that! I could not turn the Volume past 20 and it was clear and not distorted but very loud.

 

picking up the dishwasher I grabbed these paint sample cards from Menards, will try them out on the knobs. Do the leds get get hot at all?

 

what are the instructions to do the update?

 

You download the update to thumb drive. Plugn it into the unit.. Go to the file manager, find the file copy it and paste it on the unit hard drive. It should recognize it after a reboot. You can also try just plugging the thumb drive in and once it boots up it might recognize the file from it am automatically prompt you to update. But I had the best luck of putting it on then unit itself. Once you update it delete the file or the unit will keep asking to update each time you boot up.

 

Here' s boot up logo you may like.

 

Did you save it to the root drive or just any folder will work? And when you guys reboot...do you mean turn the ignition on and off or power off and on the device?

 

To the root.. Not any folder and yes just shut the truck off and turn back on