Bmc needed for toyo 285/75/17?

Anybody know if a bmc will be required with icon six speeds (17") and toyo 285/75/17's on a 3rd gen tundra leveled? Thx for your help....

 

That puts you at about 34.8”. Going to be close but I’m going to guess most likely.

 

Am i missing a piece of puzzle, according to tiresize .com it puts them at 33.8???

 

Oh my bad. I’m so used to adding 18 not 17. You’re right, 33.8. By level, do you mean 2”? I’m sure you’d be okay with 3”, not completely sure with 2”. But I would think you’ll clear.

 

Eibach level, cant really remember 2.5 or 3, had a touch of bro lean til i put icon aal on rear to get rake back. They are set on top setting

 

You should be fine. You may have to remove mud flaps and maybe a little trimming on the front liner.

 

Thx

 

Shouldn't need CMC that tire is 11.50 wide correct? If so your fine. Like @joonbug said only front flaps will have to come off. You would be able clear that tire no lift with those wheels.

 

UCA's can play a role in this equation. If they're stock then I think you'll be fine.

 

actually i was wrong, eibach sport, 0,1,2 inch settings so i am at 2 for level

 

What are everyone’s thoughts on 285/75/18’s. Will have a 3/1 loft on it. Currently running 275/70’s and think they’ll be too small for the new lift (6112’s highest setting currently)

 

Is that toward me or op. The 285 is taller than the 295...

 

Don’t aftermarket uca’s Put the tire out slightly further?

 

Garcis senor’

 

I'm not 100% sure but I don't think they do. After market UCAs move the top of the wheel farther back creating more caster. But I don't think they move the wheel out in the camber direction. I know that Camburg UCAs create more caster than any of the other common UCAs. I had 6* of caster with Camburg and struggle to get 3* with Icon UCAs. In retrospect, I like the additional caster but am not sure it would work with my Coachbuilder tie rod ends.

 

Btw what are you running now?

 

My man What are the specs on the wheels? Did you have to chop with these?

 

knobby tires...

 

Hey @segelflieger, did you ever get those 285/75r17s? I'm debating between those and 285/70s and I'm wondering if you had to do many modifications to keep from rubbing.

 

With that size you'll be lucky to find a "true" 34", they are all small. My cooper at3 in 285/75/17 are probably closer to a 33 once you add vehicle weight and all into account.

Efit - nvm, didn't load the rest of the posts...disregard

 

IIRC doesnt Icon advertise these to clear 35s with no major issues, aside from mudflaps and minor plastic trimming?

 

@BuckWallace . Yep toyo 285/75/17’s with icon 2.5’s up front.....adjustable arms kept caster and camber in specs and set for az road crown herein az. Original mudflaps on with slight mod... no rub