GEN 3 (2022+) Wheels and Tires Photo thread

Where did you order the 18 inch RRWs? Can't find them in stock anywhere

 

From RRW, it took several months for them to come in.

I do believe 88 Rotors keeps a stock of them though.

 

Got it, appreciate the info. Not sure if you answered this elsewhere, is that the trd lift?

 

It's the Factory 3" lift, although I put Dobinson's springs on the rear. I wasn't a fan of the spacer lift that they did on the rear, it felt super soft.

 

Ah nice, it looks great

 

Did you have any rubbing on the liners or anything like that? I have the same except no Westcott but I put Bilstein 6122 (1.7" lift) in front and Bilstein 6100 + Eibach pro coils in rear (1"). I get some rub when turning and it's definitely annoying. Wondering if there's an easy fix?

 

Icon 2.5 Stage 6 (3.5 in lift)
Fuel 20x9 +20
Nitto Ridge Grapplers 35x12.5
Pin back front fender liner
Full lock in reverse barely rubs frame

 

Confirmed fitment of LT285/65R20 on stock wheels and suspension on pavement at least.

This is at full lock reversing out of my driveway.

I can get my girlie size hands in and all around without touching fender liner, UCA or LCA but it looks like it might rub UCA if fully stuffed with articulation while off road. This is where a .5-1” front suspension lift could be a factor but I dislike spacer lift and avoid. Not interested in a full suspension lift. I would opt for a very mild body mount lift before suspension but I’m happy as is to fit 34.5” tires stock.

 

285/65/R20 geolander g018 at4. No lift or level stock 1794 wheels. This is the size that should have come stock.

 

So many sick setups here, nice work everyone.

Just picked up a 25 Limited Crewmax 6.5 foot bed.

Quick question here as I dont see it covered (maybe its irrelevant) - does the TRD off-road package have the same clearance as the non-TRD?

Safe to assume 285/65R20 is the max with stock suspension for both?

 

I’ve seen a few things here or there on this topic.

Pressures. 285/75 18 e rated tires (10ply)

what pressure are you all running on 35s.

 

Trying 42, may go to 44 on my duratrac RTs.

 

I’m at 42f 38r.

was wondering if I. Needed to drop lower. Seeing a variety of answers.

 

I set mine to 38 all around

 

unless you’re heavily loaded that seems super high…

Best way is to have the truck weighed per axle and look at the load/inflation chart for your tire

 

Still need to swap mine out, so no pics yet…other things have come up and had some trips get in the way so will be doing soon. Did you end up going with Toyo AT3’s? E rated? Do they have a true 37” and what width are yours? Am between Wildpeak AT4W’s and the Toyo AT3’s. Thanks!

 

I ran 295/60R20's Toyos AT3's E rated at 40 psi. Be prepared for the mileage hit! I saw mine go way down with the bigger E rated tires.

I have 295/70R18 Wildpeaks AT4W's on the new truck and I like them but the are pumped up to 80 psi currently (65 psi on the front). I am going to play around with the pressure when I have a moment to try to smooth put the ride a bit.

Another thing to consider is getting some Centramatics behind these big AT tires. They will last longer and not start the cupping and howling noise associated with these tires.

 

MY22, 31K+. Just broke down and got new tires. 295/70/18 Cooper Stronghold ATs. OEM wheels with+60 offset. No lift, no rub, no poke. The tire shop insisted they wouldn't fit. while on the lift, I had the tech mount the driver's side and I showed him the turning radius and spacing. He put the remaining three on, put it on the ground and again I showed him full turn with lock, plenty of spacing. My only concern was the the spacing between tire and UCA...absolutely no issues, lots of room. They other techs started clapping and said it looked like a truck now. They were impressed. Next mod will be a lift of some sort.

 

Looks good. I have same setup with falkens and added a 1” cornfed front lift.

 

Did you have any issues with rubbing? And did you need a lift for that setup? I’m looking to get the same setup so was curious and do you happen to know how much they weigh?

 

Currently at 40F/R on same size and E-rated/10 ply. (Cooper Stronghold A/T)
Still playing with pressures. Might drop to 38-ish.

 

I ended up dropping down to 39f 37r and it seems to have done okay.
I was seeing funny center rib wear from over pressure on the tires

now they are wearing much more evenly (dry concrete is a great indicator).

 

I have my set at 38 all the way around. I haven't notice any uneven wear yet. Total asphalt asset this month.

 

Completely off topic, but i love the squished Taco avatar. Where'd you find it?

 

I googled "cartoon tundra" and added a smiley face and saved as JPEG.

 

How does the 275 ride? Im thinking of getting 285 but discount tire says it won't fit and will rub with my leveling kit. But he said 275 will fit perfect

 

Looks very good. I have the same offset but discount tire says I can't fit anything bigger than 275. But the offroad shops say I can..

 

I have 285/75r18 Duratrac RTs, which are 35.06" tall and they fit, no issues.

 

Cornfed 1.5 level.
285/75 18s.

 

Trying to do a gut-check on offset...

275/70r18 +25mm offset...stock suspension...should fit eh?