What have you done to your 2.5 gen Tundra today?

Oil change today. Installed a Valvomax drain valve and aluminum oil filter housing while I was at it

 

Is there a .stl file that is being shared for the center speakers or someone that is these available?

 

Pre-92 for sure

 

Wow that's a blast from the past.

@james@tech12volts

https://tech12volts.com/

https://tech12volts.com/shop/ols/products/14-to-21-tundra-non-jbl-only-center-channel-plug-n-play

 

@Toe404 what’s your offset for your wheels?

 

What’s the offset for the rock warrior wheels? Anyone know?

 

5x150, +50mm offset, and ~24 pounds each.

 

Thanks @Jim LE 1301. Any other comparable wheels out there with similar offset and weight?

 

Wheels/Tires:
Relations race wheels RR7 17x8.5 0 offset
Relations race wheels black lug nuts
Relations race wheels black lug locks
20mm longer wheel studs
Falken WildPeak AT335x12.5 x17

 

Have youe gone through this thread?

https://www.tundras.com/threads/official-tundra-wheel-and-tire-setups-pics-and-info.95/#post-858

 

@Jim LE 1301 I’ve been looking at those rr7. Only issue is the 0 offset will probably have my tires and wheels stick out more than my current OEM setup. My steel wheels are +60 offset. So it lines up more flushed and tucked under the wheel well. I’m afraid changing offset to zero will potentially affect the steering geometry, put more stress on the suspension components and handling. It will however give it a more aggressive looking stance. Just thinking what would be best. My suspension is OEM thus far.

 

I’d like to keep tire size at OEM spec so 255/75r17.

 

Oh man. Got the summer of 69 going on here!

 

Do they make Molle mounts for your walker…?

 

Was it a pain? I've read nothing but heartburn installing this mod.

 

If your antique at 85 I must be pushing creation days at 1981

 

I installed one a few months ago and you don't have much room to work with so it is kinda rough on old folks . I probably would just replace the bulbs with LEDS if I had it to do again and tint the lens.

 

Is that the morimoto 3rd brake light? I like the looks but haven't purchased. Has it worked well for you and did you opt for the flashing brake light?

the morimoto 3rd brake light?

 

Yes it's the Morimoto and I did add the flashing module.So far so good on the functionality and it does look good.

 

thanks

 

Although these are the budget option, I’ve had them on my truck for 75k+miles. I don’t off-road but I do tow a 27’ center console boat. They are great for what they are. I bought my truck used and it came with them to i decided to leave them on.

 

That does look really nice.

 

Severely underestimated how much clearancing I still have to do to stuff 37’s



But it’s totally worth it for the droop

 

Relations race wheels RR7 17x8.5 0 offset

 

@Toe404 how are you liking that wheel setup so far? Any issues? Was thinking about the difference in offset from OEM +60. Any plans on getting new mud flaps, since OEM doesn’t cover the 0 offset?

 

Color matched the front grille surround and bulge. Took a chance on it, I did like the dull black front end. But ya gotta change things up sometimes.

 

it’s been 2 and a half years, roughly 20k miles and zero issues. It mildly affected turning radius but I spend .005 percent of my driving making u-turns so it’s not a problem for me. I have a set of pro-comp fender flares I plan on installing but I need to source a set of front fenders as I don’t want to cut my OEM ones up. But even with stock flaps I’ve gotten maybe 3 small rock chips on the doors

I love the wheels, the wide stance is perfect without looking ridiculous.

 

Hackett gulch trail?