DIY Trans Cooler for ~$300

I just completed this on my '19 along with a drain and fill, 44k on the odo, I used a

$59 Hayden 679 Universal 11” Rapid-Cool Add-On Transmission Cooler to Enhance Cooling (not for direct replacement of the factory unit)

Hayden 679. The trans fluid was definitely pretty cooked, looked brown in the jug with a dark red appearance on a paper towel, 4 qts came out during the drain. I was hitting 220-230F on the reg, no towing, no extra weight, 275 tires, havent taken it for a full test drive yet but I am looking forward to running cooler trans temps. I fabbed up my own bracket and ran the cooler lines next to the PS reservoir to the back of the engine bay, then down the front crossmember. It took me around 6 hours with fabbing and a few trips to the hardware store for bolts.

 

Interestingly enough, my truck is also a 2020 lol

 

I’m reaching out to the metal shop tomorrow for an update now that the holidays are over.

 

I have a 2020 and the hardlines were also the worst part. They simply did not line up...not even close. I bent the bracket at the alternator and that did the trick. I was confused why it was so hard being these are made for the truck....2020 problems eh ?

 

I did a test run on the hardline on my 2021 and it literally took me 10 mins top to get it in and bolt on.. toughest was the bracket at the alternator, had to push the line toward the rear of the truck for it to line up, maybe 2-3mm max off set.. once push the line toward the rear and while holding pressure, the bolt went in..
I took it off after knowing and seeing how it went in. I have an appointment on the 15th for an oil leak inspection. Possibly timing cover leak.

 

Let us know how your temps look with that cooler.

 

i did a similar thing to this on the Sequoia years ago. I was waiting for the hard lines so installed with just hoses, I never installed the hard lines.

 

Installed mine. Love it. More photos and videos on IG @ASV_Tundra

 

Man I need this done in Houston. I need to find a good shop

 

absolute clean install!

 

All the credit goes to my brother in law. Guy is the best fabricator I know. This mod kicks ass and totally worth doing.

 

Is your brother in law interested in fabricating the brackets and selling to an interested member?!?!?!

 

Yes. He said if a group of you got together he would hammer them all out and sell a kit with electrical wiring and switch.

 

Here is a video of my setup https://photos.app.goo.gl/KbuJEq2nScnS1KVS9

 

I would likely be in on that depending on price! Any idea how much he is thinking?

 

Yep, I'd be in on that

 

$120 brackets and hardware, shipped.

Full install he said "lets talk" and would be around $1500 for parts, fluids and install.

 

I am in as well

 

My 2020 had no issues with the OEM hardline. It did take a while to pull them through. The hardest part was tightening the bolt for the hardline to the alternator bracket. Wonder if your hardlines got bent or something.

 

@ASV_Tundra I would be willing to pay that for the craftsmanship and materials.....just let me know who to send to when he is ready to ship

 

Let’s get a head count. DM me with your cell and email

 

So hold on, this kit is around $1500? That's more than the existing kit made by the other guys right? Is like around $1299?

https://genuinecoolingsystems.com/p...08pBpGpalohK_7I1iczE8YglstmN9s4EUorY9vIWfi6wF

 

You can fab your own bracket and keep the kit at $300-400. Crazy to pay any more than what it is.

 

If you need just a bracket, you can also just reach out to @Jmunk

He supplied me the bracket for the cooler and hardware for a reasonble price...

Good quality on the product and shipping was timely and well executed