Well need help again!

Anyone mounted the anytime backup cam front camera to a limited grill? The cam does not fit my truck now im lost on how to fabricate a mount for it…please someone help

 

What camera are you using?

the first time I pulled the grille, drilled holes to line up with the mounting bracket and bolted it on.

the second time I used a push-in round style camera and cut a hole in my faux TSS cover to mount it.

you can zoom in on these pics for an idea of what I’m talking about.

 

Mine didnt come with a mounting bracket its just a camera and a bolt im

 

Im trying to find a place to mount it but theres nowhere to drill into on my grill

 

Where did you get your camera from? It looks like the same kit I got from Trail Grid Pro. If I'm not mistaken, the camera is "clockable" in that you cut a certain wire in the harness to let it know its mounting orientation. With that being the case, could you mount it to the bottom of the emblem or something?

 

I drilled and mounted to this but I had two small mounting holes to the side not one in the middle…



Is there room in front of the brace? Obviously you’d need to drill from an angle…

 

Around this blue dot?


make sure the nut will fit.

 

I've seen camera kits that are installed in the center emblem, but no mounts for a camera you already have.

2014 Front Mount Camera OEM style - HEAVY PICS | Toyota Tundra Discussion Forum

 

I have the front camera, not exactly the anytime version. This is the actual camera I purchased from

$27 iNewcow Car Front View Logo Embeded Camera for Toyota with CCD Waterproof IP67 Wide Degree (Middle)

Amazon for my 2016.

 

Thats what i ended up doing mine does something wierd though when switching back from front camera to the nuetral position on the switch it always goes to the rear camera before switching off i dont understand why it does that does your do it? I ordered mine from caliraised led

 

Definitely sounds like a switch issue. They don’t have the best reputation around here.

 

U think i should order a new switch and wire it?

 

Maybe check with them or other people here running that switch to see if it’s a known issue with their switch.

I use my Alpine head unit as my camera control so I’ve never had a switch. I did have problems with a switch of theirs for an LED light bar. If the switch was warm it would stick when pressed… it was awesome having the switch stuck down keeping the light on as oncoming traffic flashed their lights.

 

Sounds amazing

 

This is what I did. The bracket can be modified to position the camera wherever you want it.
https://www.tundras.com/threads/wha...5-gen-tundra-today.713/page-1581#post-1999234