How to turn a 5 min job into a 3 hour job ...

man, was replacing my map and dome lights a PITA. I thankfully didnt mess too much up and blow any fuses. I did happen to screw up the metal reflector on both front one lights and also mess up the white button stitch the cover pushes.. Thank goodness that's all over without bigger issues. I wish luck to everyone, haha.

 

What did you end up going with over the GTR LEDs?

 

So headlight revolution sent me the wrong LED door kit. So I emailed asking if they sent the right bulbs vs the ones in their video. I was right so they sent me the correct bulbs and had 4 extra “map and dome lights” vs the 6 way lights that are meant for the door.

edit: so now I have all their map, dome, door and exterior mirror LEDs and it’s awesome.

 

Ah I see. My truck is just the base model so I’m missing most of those lights. I am happy to have found your post since I only need to replace map and dome lights.

Edit: Just need one of those T5/74 single diode LEDs for the footwell light to complete the interior.

 

Anyone have this happen……

had a led swap on our 21 Seqouia- no problems. One led started flickering so replaced it and boom- everything blown. Replaced fuse, didn't work. Pulled overhead console and nothing seems wrong with it, tried bending tabs and reinstalling- still zero lights coming on throughout the whole car.

 

Can you use a meter, verify if there is voltage at the lights. Odds are you took out more than just a fuse, there are multiple fuse boxes as well as relays etc... under the hood. Flickering could be an indication of a ground problem, if your sure you've installed the light correctly, I would remove the light to see if you regain the rest of the lights, if that doesn't work you'll need a electrical diagram of your vehicle to see if there's something else that could of failed and affected the circuit.