What have you done to your 2.5 gen Tundra today?

At some point I should get to this level, but not soon enough

 

It’s not recommended if you like to have money in your bank account

 

If I had money in my bank account, I'd be buying more from him

 

Fair enough

 

I actually stepped away from my Baja Designs on both my trucks to put DD's on mine. I had Baja Squadron Sport's on my ditch lights, and my T100's bumper lights. I ran them on the Tundra with combo lenses for almost 5 years. I was never impressed with the output or beam pattern from the beginning, but they were too good of a deal at the time. I can't say enough good about the SS3 Max's I replaced them with, though I know they aren't on the same level of output rating. Once my T100 is up and running I plan on upgrading that one to DD SS5 max's.

 

Well got a few things done on the Tundra
1. Installed Enfig mic in the overhead slot and connected to my Dasaita Android 13
2. AJT climate control knobs and rings
3.T mobile SIM card installed in the Dasaita
4.TVD vinyl lettering on the climate control
5. AJT 4x4 knob installed

 

How do you like that head unit ?

 

I liked it but since I added the SIM card from T-mobile now I love it

 

Bilstein 8112 DSA on fronts with Dirt King UCA. Also new Ark poly splash guards, since my OEM ones were torn. Had to hack the shit out of them to fit around the reservoirs. Shout out to @memario1214 for excellent customer service! I know it’s been a while since anyone else tagged him.

No pics of rear but it has Dobinson L59-120R leaf springs for 2” lift and Bilstein 8100 DSA non-bypass.

 

Sexy and functional!

 

And $$$

 

Many times, the sexyist things typically cost a lot...but daaaaamn!

 

Finally started the mock-up on my Propex heater in my camper.

 

Sweet! The propex we put in ours has been so nice. I like it way better than the old diesel heater.

 

Hey,

Thank you for your feedback on our products. We want to point out that you're comparing our entry-level light to their highest-output model, so there will be differences. Additionally, their light costs more than double what ours does. That said, our Squadron light is an excellent choice, especially for those just starting with off-roading. For most people, it's more than sufficient. However, if you plan to tackle more aggressive off-roading, the Pro version may be a better fit. It features a different blend of LEDs and higher output, priced at $429.95 for a new set.

If you'd like, you can send in your existing lights for an upgrade to the Pro version at a fraction of the cost of a new set, and it will still come with our lifetime warranty. Additionally, you can use our uService option to change the light pattern or color to better suit your needs. If there's anything we can do to enhance your experience with our products, please don't hesitate to reach out to me directly at brahianh@bajadesigns.com.


Happy Holidays.

 

Installed some BD S1s for backup lights in the bumper.

 

I installed my amp from James Randy Taylor today. See pictures and details here.
https://www.tundras.com/threads/21-trd-pro-jbl-upgrade.107028/page-6

 

Just swapped out my stickers to black.

 

just wait until you use them in rain or snow. I have the same ones on my truck and my wife's truck. She wasn't super convinced until a road trip that had heavy rain at night, she was driving and was amazed at how much easier it was to see running them.

 

Let me know if you decide to sell. I'm on the fence of wanting the RAS.

 

So yesterday, I finished up the prep needed for a wheel offset change. New wheels are +35 offset vs the stock +60 I'm running now. Current setup works great but with the 285/75-18s I run clearance is tight with the +60. I knew I would have some rubbing going with lower offset.

I installed coachbuilder bumper spacers and removed the front mud flaps.

I was able to do it without removing a bunch of stuff like the grille and all that shown in most bumper shim vids and only went at it from under the truck. Some hints- remove tow hooks for the extra wrenching room, made a difference for me on the install. I am repainting mine while they are off. Also remove the 3 bolts that attach the lower bumper plastic to the skid plate. Then you can pull the plastic down to make it easier to get a tool on the bumper mount bolts and that makes the bumper easier to pull out. Had the wife pull the bumper out a bit while I was under there....the extra set of hands made everything much easier.

Now I just need to get black lug sets for the Racelines and Im not sure of my stock TPM sensors will work for the new wheels, may order new ones when I hit DT for the lugs.

 

I just gotta clean them up and get pictures. Shipping will be pricey since I don’t have a commercial shipping account.

 

I installed cable TV at many a house in Houston in 1982 with that drill. Was often met at the door with screams of "I want my MTV!"...

 

Pulled the bedcage and bumps off in prep for all the new crap we ordered. Been so long on all parts ordered I’ve forgotten what’s all on the way lol.

 

History has been made....parts not on the wife's dining room table or counter tops.

 

lol I thought about wrangling this inside. Not to worry more kitchen photos are inevitable lol

 

This delivered this morning, installed in about 3 hours, write-up here: https://www.tundras.com/threads/new-exhaust-system.137060/page-28#post-3805363

 

Had the truck and my new wheels ceramic coated with Gtechniq Crystal Serum Light & EXO. Came out better than expected on the truck with it being a 2016 and outside its whole life in the northeast with all the salt and grime from multiple winters. Crazy how smooth and nice the paint look now. Was 50/50 on ceramic vs wrapping the whole truck, glad I did the ceramic since I love the quicksand color (have yet to see another trd pro quicksand in person)

Still waiting on DRT Fab's cab mount relocation kit (ordered 11/18) to get to me before I install my front and rear king 3.0's, deaver leaf springs, and 37 inch tires. Boy am I getting impatient lol website says 2 weeks estimate lead time and well yeah not accurate. Oh well things could be worse!

 

I like! Are they a good quality set? You have a link?

 

Yeah they are real good quality. I got them from a local seller on OfferUp out here in Orange County.
https://offerup.co/DSTaLuLKMPb

He makes them to order and can make them any size and/or color. Looks like he does offer shipping too. I got the bedside decals as well as a few of the regular TRD decals he has listed.