WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

I used the "quote" link, I chose to erase the text so it would not display the quote in the body of the post. Thanks for looking out though!

 

That looks great! Did you modify the OEM Platinum ambient light parts or make your own? It appears much brighter than the door lights that come in the Platinum trims.

 

Fred Anderson order hit the doorstep 15 minutes ago. Nothing major, but some nice touches to complete the look. Have the tailgate inserts to put on too, but it’s raining.

 

Fillder up. 11gal of E, 12.5 of premium

 

Damn Cali sucks

On another note, can you share a pic of how/where you have your JB4 installed?

 

115° summers and its still stuck on there

 

Mood lightning is PITA

 

Fuse will be in the fuse box under the dash on the passenger side. Pull the cover off the box and it has a graphic on what each fuse is used for. The big panel you have to pull off is a pain in the ass. It is a long panel up by your toes.

 

Can't figure out if I destroyed window master switch or if fuse blowed somewhere. No illumination on master switch, lock and power windows on that switch are not working, mirrors still work for adjusting but do not fold.... will connect my scanner tomorrow to see I'd bcm knows what going on, may be it will trow code at me

 

Just put a ready lift suspension 3in SST kit and added the ready lift cv axle. Man im so happy with the ride quality and the added height. Special shout out to total off roads for the install!! Amazing work as usual. Definitely took an immediate hit with my mpg. We'll worth the hit. Also added baja legend exp 35x12.5r17

 

Had this delivered yesterday. Box arrived all beat up (I assume it happened in NC where it was delayed several days). In inspection, I noticed a crack in the grille I’ve emailed BAM asking for an exchange or for a small refund of my original purchase price. I don’t mind keeping it if the refund amount is agreeable.

 

That looks great. I'm looking at the same 3/2 readylift with CV axle upgrade. Next step is to find the lightest 35/11.5R20...

 

35’s 4evr

 

Bummer. Hope they do right by you.
Potential fix? Super glue crack together then a little plastic weld on the back side? Should be nearly invisible when done right.

 

Something like that, you could also use a bit of JB weld on the backside so you can't see it.

 

You could use a plastic welder on the backside.

 

Got some door lights today, no big deal, but better than what was on there from factory.

 

This truck wins. Well done

 

NICE!
Great minds and all that.
Also can see the additional blue footwell lighting I added.

 

Which TRD Off-Road light is that exactly if you don't mind?

 

https://www.mvpautosupplies.com/
is the website for the manufacturer, but I got them from Etsy, where the seller name is MVPCUSTOMSshop.
That's assuming my Etsy versions aren't knockoffs, which is possible.

 

Yup, ans some of you mentioned, I’ll probably use JB Weld on the backside. It’s a fine hairline when pieced together, so shouldn’t be noticeable . I’d hate to exchange it at this point.

 

All-Pro tailgate panel. Good quality for the price. No more destroyed knees.

 

I added the OEM dashcam and seatjackers from Desert Does It. I opted to only go with the 3/4” lift on the seatjackers but it makes a world of difference in seat comfort.

I also pulled out my Bedrug XLT and swapped it for the full Bedrug. It was a wash from a functionality standpoint but I prefer the more finished look.

 

I installed Tufskin rear tailgate tundra overlay,
Trd overlay for front grill and door sill overlay

 

Installed 1/2" cornfed rear spacers today to give it just a tad bit of rake.
The 1.75 front level made it perfectly level front & rear. (About 1/4" higher in rear). So I added the 1/2" spacer, now it's perfect.

 

Did you have the physical metal key inside? I bought my 24 with 5k miles and they don’t have the metal insert key for the second fob and said I should have got it when I bought the truck used

 

So, are these used lots possibly keeping the second key to give to the bank. You know for those repo days !!!!

 

I bought my 2022 tundra used from a dealer. No second key. I called my local Toyota to see if by chance my vin had a second key issued already. He never really answered me but did tell me it would be $400 for another fob and key.

 

Thanks! Just ordered.