22 Tundra TRD Suspension Lift Kit

Rear shock on my 2023 TRD lift is leaking at 43,000 miles.

 

Stinks. I had a shock leak on my 21 Tundra that only had about 10k miles. Toyota mechanic didn't install the replacement correctly. Fortunately those shocks on your truck are cheap and easy to replace using hand tools and a ratchet strap to compress it. No lift needed.

 

Just had the lift installed few days ago. So far so good. Front a little high…supposed to settle they say.. headlights are too high, blinding people here and there - dealer said to get them adjusted again.

I’ve not measured height front and rear post lift.

 

Kind of surprised me, Toyota said they would cover it.

 

Looking really good! About to lift my short bed Army Green w same wheels and tires & really like how yours came out.

 

Is there a post buried in here somewhere that lists all of the part numbers of the various components included in the factory TRD 3" lift? Shocks/struts, UCAs, springs, brackets, etc.? I may look to purchase some of the parts separately and thought it would be handy if there was a list of the part numbers somewhere.

 

That is perfect, thank you!

To take it a step farther - has anyone taken a picture of the entire kit laid out so that we can see all of the parts?

 

Here you go

 

Wow, thank you, this is all very helpful! You guys are the best.

 

I have a 2023 Platinum with the factory 3" TRD lift. I am getting a tire rub at full lock with 285/65/20 BFG KO2's. Has anyone installed the below Icon sway bar kit over the factory TRD sway bar drop kit and seen if it solves the rubbing issue?

 

Rub with 285s with the TRD kit? I thought guys were getting 295s on there at stock height?

 

Nope. 285’s rub on the sway bar

 

Yes, I removed the one Toyota sales and used the icon one and rubbing stopped, 295/65/20

 

@machd08 Thank you for confirming. Looks like I will be ordering the Icon kit.

Did the ride change at all?

 

Not that I can tell, do u have the Red TRD sway bar? That helps out allot, especially going into corners. If you don’t, recommend it, but t there are a few parts that you have to switch out, it use to be on the forums but since Ryan is no longer on here, it may be gone.

 

I do not. I only have the factory black sway bar.

 

@machd08 Would you mind posting a pic or two of your rig and the icon spacers installed on the sway bar for us to see?

 

I'm thinking of doing this. Did you keep the factory rear springs or add taller ones/ spacers? I'm leaning towards adding 1" Dobinson's 0-110lb rear springs.

 

What's going on with the TRD lift? you can buy it or any of the parts anymore?