What have you done to your 2nd gen Tundra today?

I still need to update suspension… not sure exactly what I’m going to do… want to lower in in rear but need to be able to help plant it for more traction. I’ve decided not to add air ride.

 

Here are some other pics…. The cool part is I got toyota warranty to cover the costs.

 

It’s install day!!

 

I installed SOS lowering kit. It goes from SOA to SUA and lowers the back end about 3-4”. I have it on my 2WD ‘07 SR5. I’ve bought the same kit for my 2010 RCSB 4WD. I want it to sit level. They have an SOS Airbag kit which I also installed and will again. So it hauls level no matter how much weight I put it. I’ve had as much as 2000lbs of cedar 4x4 fence posts in there.
I can say that the 2WD handles way better with the lowering kit. If you put the TRD sway bar on I’d almost promise positive results. Certainly from what I read on the RCSB thread

 

Had the head unit installed and then added the power window controller that does all 4 window with the auto up and down. Slowly adding and adding... before and after of the head unit.

 

I need to do this on my '08. Been dragging my feet.

Said the hell with it and picked up a '21. Figured it was less of a hassle.

 

Expensive radio lol

 

Rotated my tires for the 1st time since I got them. The fronts were really worn on the outside, I’ll have to do this more often. Put anti seize on the mounting face of the weeks and the taper of the wheel locks.

 

Hey could you elaborate on this or share a thread link? That sounds wicked!

 

I believe all you have to do is get one of those:

$99 HIGH FLYING for Toyota Tundra 2007-2021 LED Lighted Power Window Switch Control Panel, Lock/Unlock Switch with Auto Down/Up, Kit of 4pcs Blue Light (NOT Fit 1794 Edition, Limited, Platinum)

https://www.amazon.com/HIGH-FLYING-...+Panel&qid=1721802035&sprefix=,aps,268&sr=8-1

 

Got all the parts installed!

I had Bilsteins 6112 and 5160 + x1 shim on passenger side and x2 on driver said for a total of 3’, Freedom Off-Road UCA, Coachbuilder 2” (1.25” actual) Rear Shackles, Talon's Garage Skids, Method MR314, Falken AT4w installed.

Before:


After:

 

What size Falkens

 

They are 35x12.5r18. Had to do BMC and trimming of the liner and removal of the mud flaps. Apparently they are big for 35s but worth it as they’re super quiet on road from 0-65

here’s before

 

Thats it, but I found one on Amazon for $39. Same company.

 

I found a New in the box Extang 3 fold soft bed cover incredibly cheap. Just installed at 158,000 miles LOVE it!

 

If you don’t mind me asking, how much was the paint work? Looking to get my crewmax repainted when I get a bunch of my door and window rubber trims in

 

Picked up a used set of WKOR sliders. I sanded them down and repainted them with a Hurkuliner. Pretty happy with the results.

 

Installed IPT valve body. Went well except for spilling a quart of ws fluid in my fender and cowl...

 

Nice find!

 

Wash and little photoshoot

 

@dittothat posted them in the Craigslist finds thread. Got a great price on them to boot.

 

Installed Sealight hi beams to match the low beams I installed 2 years ago. The light output difference is amazing, should have done them both at the same time. Next up will be the fogs.

 

I have the same ones. They have been really solid for the past 5 years

 

I like so much that they are on all my vehicles. Have even put them on my neighbors and relatives cars as well. Can’t beat them for the price, especially during Amazon Prime Days

 

White knuckle off-road is on Amazon?

 

I think he may be referring to the Sealight post from earlier today.

 

???

 

Seems like there was some confusion. @TheBeast and I were talking about sliders. You , I think, were referring to sea lights. All good in the hood.

 

Anyone looking for a spare SAI setup or need one now here's one in my neck of the woods

 

Where are these located on the truck?