GEN 3 (2022+) Wheels and Tires Photo thread

Questions and yes I did search, but no luck.
I have a 24 1794 LE, that came with TRD Pro 1.1 lift, I changed (because I wanted to), to Icon 3.0 Coilovers and UCA’s got an additional 2” lift, in my mind that would be 3.1” lift over stock.
So questions are am I correct in assuming it’s 3.1” over stock and should I be able to fit
Michelin Defender LTX Platinum in 295/65/20 without mods?
Thanks

 

Questions and yes I did search, but no luck.
I have a 24 1794 LE, that came with TRD Pro 1.1 lift, I changed (because I wanted to), to Icon 3.0 Coilovers and UCA’s got an additional 2” lift, in my mind that would be 3.1” lift over stock.
So questions are am I correct in assuming it’s 3.1” over stock and should I be able to fit
Michelin Defender LTX Platinum in 295/65/20 without mods on stock wheels.
Thanks

 

Toyota sells tundras off the lot with the 3” trd lift, stock 20” wheels and upgraded 295’s so I imagine you’d be okay.

I’m running on a King 2.5 lift with the front lift being about 1.8”. I have 295/70/18 and have no issues with rub and no modifications

 

Will see today, going to Discount tire and they will trial fit to make sure no rubbing, just called and said they had set in. Thanks for the input.

 

I paid 820 shipped for them.

 

Can someone tell me what tire pressure I should be running on these daily? 295 70 18 ko2's. I'm thinking 38-41?

 

Well the Michelin Defender LTX Platinum 295/65/20 will fit, no rubbing no mods, and mud guards are still on it, will get better pics. They ride pretty quite.

 

Ended up weighing my new wheels and tires:
77 lbs TRD Pro wheels with General Grabber ATX 275/70R18 (SL)
73 lbs TRD OR wheels (20in) with stock Falken Mildpeaks

 

I would suggest, from my own R&D department, 50-55 upfront and 40-45 in the rear

 

Do you like the platinums? I was thinking about getting them in 285/65/20 for my ram 2500, or doing the recon grapplers like I did my tundra. I like the defenders for my 4Runner.

 

do you know what offset your wheels have?

 

Where'd you get your center caps?

 

2024 SR5 with Method 316 +25 and BFG KO2 285/70-17

 

Only have about 30 miles on them, so far they are great

 

Whatever the offset is for OEM wheels, I have no idea

 

They came on the truck, came on 1794 LE

 

That seems pretty high. Are you sure? Is there a reason for the front/rear difference?

 

agreed that is a little high. front gets more because its heavier (assuming unloaded bed/no trailer on the rear) b/c of engine + front end components.

 

If you ever get a chance to take a picture of the back of the cover for the part number, you'd forever be my hero.

edit: nevermind found it from another thread PT998-35221-3S for anyone that needs it.

 

Will do, it’s in the shop now getting some warranty work done, be few days

 

Test fitted 295/70/18 Toyo OC on RTX Patton +10x9 today on work truck . Mildly touches mud guard and front fender liner at full turn . New 24 TRD CM shows up Thursday , so no TRD lift ( Stop sale order ) . I think I’m gonna leave the big wheels until the new spring compressor gets approved . Look like a squat truck , I dunno ?

 

added 1” spring spacer to the rear 2” lift coils.

 

This thing is sickkkkkkkkkk

 

The load charts say 35psi, I like 37 for road trips. I've run as low as 32 on my dirt roads "around town" and it rides very nice. Anything above 40psi is very harsh since this truck doesn't weigh enough to compress the tires.

 

Thank you for the info. I will try 37 for now and go from there.

 

tis 563bz 20x9 +18.
Nexen atx 275 60 20

 

Westcott. Toyo open country at3. 295/65-20
22 trd sport. Hated how it sat 1” lower from the factory. Love it now.
Perfectly level now. Picture makes sense t look low but it’s not

 

Just a level?

 

Wha?? I was asking if it was a level or lift

 

i'm looking at possibly changing from the 20 inch TRD Adventure wheels to the TRD Pro Wheels, what's a good price to pay for on market place ? Just Wheels no tires or anything else. Thanks all