1st Gen. Lunch Table - General Discussion

i think i called & asked about the same lbj# that sunnier used, and boerne toyota verified it was correct, so then i ordered em from whichever dealer was running the sale.

 

Twas busy boys

 

Well.

//Looks at TREs, LBJs, thinks 'that's probably fine'//

 

pretty sure i had found a reference chart, i'll let you know if i find it again.

 

My favorite is the exploded parts diagram that's totally understandable, but then the numbers changed at some point, but the diagrams weren't updated. Genius.

 

Might help get the ball rolling?

https://www.tundras.com/threads/mysterious-ball-joint-kit-04005-04134.92124/

i cant work the new toyota site either. Just like all important books, if theres no pictures, i dont bother.

 

Can call Serra (205-838-4400) and give them your VIN then they will give you the part numbers. They are very friendly and helpful in my experience.

 

When you get into EPC data, go into "Transmission & Chassis", scroll to the 2nd picture and click on "Front axle arm & steering knuckle".

Inside there, click "Open Full Size Scheme".

​

Do yourself a favor, in the big full size image. Hold your mouse over either of the numbers I'm pointing at. You should see a helpful pop-up window appear saying "JOINT ASSMBLY LOWER BALL ...", i.e. the website gives you the part inf. This will help you make sure it's the right part, since the other numbers inside the box are for the castle nut and cotter (left/right). The way these diagrams are laid out, an ASSEMBLY is boxed, with the reference number OUTSIDE the box. Anything inside the box is individual pieces in case you don't need the full assembly.

With that in-mind ... Click on the number with "RH" at the end for passenger side (right hand) or "LH" for left hand ... the numbers above it are for the castle nut (the numbers ending in L and B) and the cotter pins (the 10-digit hyphenated numbers).

​

When you click on each of them, it'll take you back to the small diagram and spit your number out at the top. There's your part number... The main part number (FOR MY 2006 AC 4WD ONLY!!!!) is the one I'm underlining in red. Notice theres a "substitute" (SUBS) part number underlined in blue which is a compatible alternative, dunno what that's about.

​

 

You'd be amazed what a toothbrush will do to knock stuff loose. Then vacuum it out. You can also use water in there, PHM did that with his, it should drain out the nipple in the firewall.

I would literally toothbrush to knock that shit loose, vacuum it out, maybe rig up something on your vacuum to reduce the nozzle to fit. Once you vacuum, get any foaming HVAC coil cleaner and apply it directly on the coils, let it soak in, brush it, rinse/vacuum again.

Or just knock the big shit loose and vacuum, then when it's mostly gone, follow this method. A brush will loosen and vacuum should suck out most of what you see there. The foam will do the rest. Just don't foam using my method unless the resistor is reinstalled! Else the foam will be on your floorboard. I'd also empty the whole f'n can into the firewall nipple.

 

Just chop down that Bradford Pear

 

That ball chiller comes in clutch baby. Don't know why they ever got rid of them

 

Naw it's my sister's house she likes the shade. But we cut it back by about 4ft all around, so about 8ft off the total diameter.

She's gonna rent a mulch chipper and we're going to mulch all the cuttings. I'm trying to see if that woods good for smoking if so I'm gonna do a brisket with it. @Mr.bee @455h0le_dachshund @FishNinja

 

pear wood for pork. I use fruit wood for pork, oak for beef, and mesquite for chicken.

 

RIP

Best female wrestler to ever live.

 

That's about what my 2.5L 1999 Ford Ranger got. But it wasn't turbo and it was a single cab. I'd call it a win.

 

*& only up to $200.

Ask me how I know.

 

I've been this rabbit hole and have taken the whole evaporator out and separated the cases to clean it, as well as change the expansion valve. You're most likely not going to be able to pull the "lower unit case" without pulling it completely out of the dash. Back two screws and the clip specifically will be hard to access.





Here's my posts from tearing into the dash and pulling it out:

 

That's a bummer. I'm sure in the future, if you hit the limit, you could just make multiple orders.

 

Is that a Acura v6 or something??? Lol that thing looks rad

 

J32 (at least what i searched for) probably from a tl. Could have been had with a 6 speed & plenty rowdy.

 

That's a good idea.
But I think it's was like $40 I had to cover for shipping. So not too bad. Just enough to make me email em and complain about their false advertising.

 

This is the exact reason why Toyota should’ve had a cabin air filter for the Tundra and not just the Sequoia.

 

What you don't think Rowdy Ronda is the best ever...... I feel a hissy fit coming on

 

Chyna was the best to ever be. She set the stage for the current women's superstars. I'm not discounting them, because they are awesome. But Chyna could legit beat up some of the WWF's men. Plus she was in DX... Nuff said.

 

You mean Rodney Piper had a bastard child?? I did not know this occurred.

Chyna could waste her, regardless.

 

Lots of the old guard now have legacy kids in the biz. Pretty neat.

 

Decided to make my own adapter today to measure clamp current for my new meter.

Good to 1 mA resolution AC or DC. Not true RMS but I’ve got the Fluke for that when it comes to square waves.

 

Naw Rodney didn't, some one got beat in the UFC cause she was drunk on her own hype b******* couldn't handle the pressure of her comeback loss and then fled the UFC and then went pretending to be the world's greatest fighter. And now the WWE calls her rowdy Rhonda. Which I feel is a slap in the face to somebody who used to watch '80s and early's '90s WWF wrestling. She's not even half as cool is the piper was

 

Y'all mixing up Rowdy Roddy Piper and Rhonda Rousy? Lol

I also thought you meant Roddy Piper had a daughter in WWE.

I know Rick Flare has a daughter in WWE and Dusty Rhodes has two sons in WWE. Although I'm not sure if Gold Dust is retired or not. I'm sure there's others I'm forgetting

 

No the WWE calls her losers ass Rowdy Ronda Piper