Replacement Lock Trail Edition

Any idea where replacement locks can be purchased? Purchased truck used and the keys are missing for the current locks.

 

Camper shell lock? What brand is the cap?

 

No it is for the tool boxes that came with the truck. Toyota OEM boxes.

 

Contact your local Toyota dealer

 

Either take the locks to a locksmith to get new keys cut, or reach out to Toyota. Personally, I'd ask @Roman as he is our OEM Parts Guru on here.

 

Local Toyota dealer says there is not an option for anew key. Locksmith says they can do nothing. @Roman appreciate any help you can provide.

 

Let's see the bottom of the lock.
Is that a push button lock?

 

Yes it is push button.

 

Maybe something like this???
Free returns if it doesn't work.

FJM Security 2610B-KA Tubular Push Lock with Chrome Finish, Keyed Alike

FJM Security 2610B-KA Tubular Push Lock with Chrome Finish, Keyed Alike

https://www.amazon.com/dp/B005GUQJNQ


Just search Amazon for others.

 

You need to see a "real" locksmith, I assure you a true locksmith can in fact make a key.

 

I don't mean to crash your thread (but i guess that's what I'm doing ) I'm thinking about adding those boxes. How well do you like them & is there still at least 48" between them for sheet goods like plywood?

I can't help with your lock issue but if you need fireplace advice I'm yer huckleberry. Thanks!

Victor

 

I have the boxes. Like em'! Yes, just a bit over 48", haul panels often here. Some say they leak, mine don't leak, but I don't pressure or wand wash my truck either. Old fashioned sponge and bucket method here. I will say they could interfere with some accessories such as a soft topper cap because of the way the framework folds up and down.

 

Do you have a key at all? If so, which locks does the key work in, if any?

 

I have the same issue. No key and no one will touch it. Was there a solution to this?

 

Its unfortunate that there's so few real lock smiths around anymore since an actual lock smith can definitely create a key for it.

 

I thought the keys for the box is generic?

 

The dealership lost the keys for miine and had to order new boxes because not even they could get it rekeyed....so likely unless you find an aftermarket service you won't fix it.

 

I’m in the same boat. Hate to drill it out if a better solution is possible.

 

With a little work, I'd think @Jim LE 1301 suggestion would work for y'all.

FJM Security 2610B-KA Tubular Push Lock with Chrome Finish, Keyed Alike

FJM Security 2610B-KA Tubular Push Lock with Chrome Finish, Keyed Alike - Trailer Hitch Locks - Amazon.com

Just do some measuring and see how close it is.

 

Try easykeys.com.

They have helped me in the past.

You most likely would have to send a "Submit a Request" with pics.

Worth a try.

Good luck.

 

Any luck on the locks from Amazon?

 

I recently purchased the fjm security lock and it was too small.
Any help or ideas guys?

 

I am currently trying to get keys made for these locks.

My locksmith kept it for a few days and couldn’t get a key made. I’ve used him for years and believe if it was possible, he could do it.

These locks are massive with a 1.18” OD. That is unusually large for this type of lock making an off the shelf solution difficult to find.

If anyone has had success. Please post.

 

Real locksmith here. Unfortunately locksmiths don't manufacture keys from raw material. In order to make a key we would need a correctly milled blank that goes into the lock. Maybe there is another key that is close enough that would work to begin with but maybe not. If we had the correct uncut blank to start with a locksmith should be able to impression a key unless the lock has a sidebar design. If it is a side bar and the lock does not disassemble then no they would not be able to.

My guess is your Locksmith wasn't even able to find a key that would work to begin with to even properly attempt to make a key.

 

Contact Toyota customer relations and request the contact information for the box manufacturer,/supplier. Then reach out to them to request the contact information for the lock supplier.

 

Just wondering if anyone has had any luck with finding a replacement lock/key for these boxes. I'm a new Tundra owner and in a similar situation. So far the individuals I have talked to at the dealership have come up empty (probably just havent found the right person). I did come across a website that supposedly had replacement lock cylinders but seemed a little phishy. Any insight would be appreciated. Thanks!

 

Welcome to the forum! Can you please post a link to what you found? Just so others can evaluate their options. TIA!

 

Sure!

https://parts.toyotadalton.com/p-bed-cooler-box-key-cylinder-pt27134000lc

The email address listed at the top of the page is whats throwing the red flag for me. That and when I look for the part number through toyota I don't get a matching item, but I'll claim ignorance for that.

 

if these are locked on truck with no key, they can be picked by a locksmith easily. I too am missing keys. Called dealer a few days ago. They list five different options for replacement keys. 5 bucks a set. I can’t find a part number on my cylinders but haven’t removed one yet. If I pull cylinder and don’t see a number, I’m ordering all five options.

 

My boxes are not currently locked, but would love to have the ability to lock them. I would gladly pay 5 bucks for a key! Please update us if they were able to provide a key!