Unlock/lock beep

does anyone know where the module that beeps when you press lock or unlock is located i want to unplug it of turn it off so it doesn’t beep when i use the key fob i have a 2003 tundra

 

The beeper is under the hood on the driver's side,it's a small and round,just unplug it.
press the remote with the hood open to find it.

good luck, john

 

i’ve been looking everywhere for it and i can’t find it but i’ll try again

 

It's a little tombstone shaped guy on my 04 it's around the battery/drivers headlight area.

 

It's called a tvip buzzer.
I attached a pdf file, hope it helps!

 

My horn beeps on my lock unlock on my 01.... is that what the connector beside battery is for?

 

At the top of this post: https://www.tundras.com/threads/so-you-wanna-buy-just-bought-a-1st-gen-tundra-eh.115928/

There is programming info linked for the OEM keyless system by year near the top. It lets you change behaviors of the system.

The beeping itself is coming from a round piezo speaker that should be teed off the wire harness coming thru the firewall under/beside the brake booster.

 

Just do what I did and remove your fender liners. Eventually the piezo will get so wet it won't work anymore.

 

I stuffed an old earplug in the hole which cut it's volume by half. Much better!

 

There are probably times when I'd never find my truck again. I use that loud ass beep to help locate it in parking lots.