Added MTS/Crawl Control switch to Platinum CrewMax

Just put one on Friday, MTS comes up with the options for mud, sand, etc, but like folks have said previously, Crawl Control nothing, as I don't have the locking diff.

 

Tried the lower model switch today with only the mode and tow/hall buttons. (23 SR). It didnt work either just like the switch with MTS etc. Lights up with ambient lighting but nothing else and does not work in 4WD. Hi or low.

 

Oh well… I guess manual S8 gear will do for now when towing. Probably does the same thing.

 

So, I hate to be redundant but several different models are in debate on this thread and I'd like to get clarification before I buy the MTS Switch.
I have a 2023 Platinum 4x4 non-hybrid, no AVS/TRD - just the standard suspension. If I get the MTS switch will I get the MTS options/visuals on my LCD gauge cluster? Since I have all the cameras, will the special off-road view modes work? Will the added MTS modes work on the drivetrain aside from DAC & crawl control?

 

Yes, you get options and it shows on the gauge cluster. The only difference in our vehicles is I have the hybrid, don’t think that would make a difference. The only part that won’t work is the MTS/Crawl unless you get the locking diff and the wiring from what I have read here.
There are cheaper places to get it online than the dealer unless they price match, which mine does. Sparks Parts is one of them

 

for clarity - adding the switch to a platinum with PVM, the MTS drive modes, except crawl and MTS visuals work as if from factory - correct?

 

Yes, it does on mine

 

Confirmed on hybrid. At least the system says it's in the MTS modes.
For install, wedge tool to pop mode switch out, can reach tab on connector to release cable. No way I could reconnect, removed adjacent drive selector (popped out same as mode switch) and reached in to latch the cable.

 

so does this switch just providing visuals or does the MTS button actually works when in 4x4? Was wanting to add it on my 1794 hybrid

 

Just added the MTS switch in my 2023 Platinum Non-hybrid. Popped the switch out from the top with a plastic trim prybar and also popped out the 4wd switch for access to plug/unplug the switches. Took my time to make sure everything lined up perfectly so I didn’t bend any pins on the switches. MTS modes are displaying and all other functions (except DAC/Crawl) work properly.

 

So what exactly are we gaining here?

has anyone confirmed it’s actually doing anything besides lighting up the dash ?

 

Did you read the thread?

 

Currently awaiting a 2024 Platinum. Didn’t go for a TRD package (main function will be towing). Still like the idea of adding MTS. Don’t really care about crawl control. Unless I’m missing something it doesn’t look like there’s a switch assembly that would have everything except DAC/crawl. If I swap out the switch assembly I’ll want everything to work or my OCD will go nuts lol. Anyways I’ll be hoping someone figures out how to get it all working.

 

New to the discussion, I have a 24 platinum gas only. Non TRD, non avs. Has any tried this option on the 24? And has anyone actually confirmed the sand, snow modes actually do something other than look cool on the dash? I'm trigger happy with buying parts that do things they're supposed to

 

I would read through the threat. I will tell you it does change traction control, making other settings. The gas pedal does feel different as well. But that could be a bias.

 

I read through the entire thread and nobody mentioned it actually working other than lights, as well as nobody I saw has tried it on the 24. Platform. So I'm curious if anything has been confirmed before I buy.

 

It seems like there was back and forth on whether it does anything to the actual drive or not. Some people say they think yes, some people say no. I wish we could get a solid answer.

 

The challenge is, how do you know if it's really working? I have the switch in a 1794, the dash gives all indications it's functioning. Real test is to take off road, compare traction - for instance when in snow can you spin the tires without traction control activation. I plan to do this, however, winter has not cooperated in my area. May have to wait for mud season.

 

Let us know!

 

Did your truck have this stock or aftermarket?

 

Anyone have any luck getting the special trail camera mode to work?

 

Does the MTM work with just having the switch installed?

 

Been following this thread for about a month as I just bought a new 24 Platinum Tundra hybrid. I bought the MTS switch from a dealer and talking to the parts guy, he said to find out the different parts installed from a Platinum to a TRD Pro is to get both VIN numbers, I have no problem using mine, to a TRD Pro and look and see what’s the difference in parts between the two of them. If someone can find a friend or track down a VIN number to a gen 3 TRD Pro Tundra, we could get the answer there. Just what I was told.

 

Not all heroes wear capes

 

Thanks for the info and I will see what I can do. I will go to my local dealership and try to convince the person to put in the time to look to see the difference. I will even throw them a 100 bucks to put the time in. Give me a week or so and I will report back on what they say.

 

So having all the part numbers, have you purchased and installed and everything works? Just curious

 

After doing some research this morning I've come to the conclusion this is not easily possible. As the OP mentioned, there are two TC Control Modules: 895330C091 (TRD Pro and OR packages) and 895330C101 (non-OR). Given the inconsistency in reports for those with a non-OR package, swapping the switch alone is not likely enough. MTS disables traction control and VSC in most if not all the MTS modes and no one has been able to confirm this actually happens. The only thing folks have reported is the MTS selection screen.

I was curious, though, if some TRD non-OR vehicles may have the OR TC module. As a I have a TRD Sport I took off some dash trims and checked the part number. No such luck - I have 895330C101

While its a few hundred dollars for the OR version of the TC module, it is not easy to get to. I attached a photo I took this morning. The control module we are interested in is highlighted in yellow. You would need to remove all the trim in that area and find a way to disassemble the entire metal frame of the dash to access that area, then remove all those other control modules before getting to the the one we are interested in. Apparently, the Gen 1 Tundras had the TC control module under the front passenger kick panel and was super easy to get to. Not our luck.

I applaud anyone else willing to experiment more with this but I'm no longer optimistic this is possible. Hope I'm wrong.