What have you done to your 2.5 gen Tundra today?

He's really good at those offers. He's kind of a pusher

 

Can confirm. Hard pusher.

 

Daaaaammmmmmnnnniiitttttt!!!

 

Nice looking truck! Darn it, now I have to remove step bars and paint my wheels!

 

Just realize the screws actually goes thru the wheel well into the bed. Not good!




So, I did some modifications. Found the shortest screw possible with a hex nut to secure it inside the bed. This helps by shortening the length of the screw. I do not want to gash my ankle or feet on the open screw. I also painted the screws on the bracket black to blend in with the liner.

 

Was the line too short to mount to the frame rail?

 

Those look perfect for you rig's current set up

 

You could flip the bolt around so the nut if on the other side

 

perhaps reverse the screws so the heads are inside the bed and the nuts are by the reservoir?

 

https://www.tundras.com/threads/fs-ajt-designs-chrome-delete-kit-brand-new.135948/#post-3442193

 

Thanks. Your setup is nice. But I'll check again to see if the line is long enough. If you look at the Bilstein, the line comes from the side instead of from the top. It will swivel, but I'll see if it's possible. Thanks.

 

Yes. I actually wanted to do that, but the screw will extend too far out where it will hit the reservoir. I will go back to the hardware store to look for a shorter bolt and redo it. Will keep ya posted. Thanks.

 

If you’ve got a grinder or hacksaw, you can make that bolt as short as you want.

you can also get low profile nylock nuts

 

Was going to say the same thing.

 

I was wondering where you found that little space. I have looked there and did not see anything but thought you had it. Always look before you drill

 

dropped the RSB mounting hardware off at the powder coater. My OCD will thank me later.

 

Received my replacement black center instrument panel from Sparks today and in plenty of time for the removal of the silver unit and install of the new Alpine HU next week.

 

New shoes for the Tundra. The dealer installed rubber lasted all of 25k miles.

 

I found the same on my original tires (Bridgestone Duelers). Just replaced them with Michelin LTX Defenders a few weeks ago.

 

Sparks offers a black center console? Never seen that before.

 

Its for the SR trim. But it fits the same and many folks have bought it.

 

part number please?

 

Very nice!…. Any chance you have a part number?

 

Center Panel - Toyota (55405-0C010-C1)

Just noticed that's for a 2wd

 

Or look for one from a wrecked truck. I got one on EBay from a wrecking yard pretty cheap.

 

Instrument Panel Trim Panel - Toyota (55405-0C020-C1)

4wd

 

The 0C020 is for the 4wd.

Post 71 & 72 from the Interior Blackout Thread. The 2014-2020 part number works in the ’21 TRD Pro, which is the part I ordered. As stated, it doesn't show as a fit for the '21 TRD Pro as that black trim option wasn't available.

https://www.tundras.com/threads/interior-black-out.103677/page-3#post-3436432

These appliques also work but have small areas where you can see the silver trim. I opted for the Toyota part as I’m having the head unit replaced next week and thought it would be easier for the installer to tear apart the dash than me struggling with it.

$86 HIGH FLYING for Toyota Tundra 2014-2021 Car Accessories Matte Blackout Center Console Air Vent Cover Frame ABS 3pcs

https://www.amazon.com/dp/B09KXZ741X?smid=A2SIJPKG1AJQB7&th=1

 

20x9.5 +6mm Black Rhino Axles and 275/65/20 Milestar Patagonia XT’s going on Tuesday. Got the Dorman 610-471 wheel studs as well. Pretty excited for these! Will post pics once they’re mounted.

Got a helluva deal on the wheels. Buy 1 get 3 free thanks to a Discount Tire price error on eBay!

 

Got her detailed just now..
20" OEM wheels are getting powder coated right now so running around on these 18" rollers for now but I'm actually liking the look of these wheels but are definitely gonna see a good powder coat when my 20" tires are due for a change.

Also, JUST received a package.. any guesses what it could be?

 

Cat shield?