WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Heritage grille (please don't hate me ) and markers, and chrome delete.

I don't think anyone has tried it yet. But I made a harness for the fog light to split power and power the amber markers -- turns on with fog lights, and no other additional wiring.

Diode Dynamic light bar was suppose to go in too, but now has to wait.

 

You telling me you’ve got 35’s on with no rub? This comes off condescending which I promise it’s not haha. Same truck here and imma need to upgrade here in the next few months.

 

You, uh... you chose to chrome delete with a local business right?

 

I have Nitton Recon 35/11.50/20 with no rub-that's when I had installed. Full wheel lock-nothing. I did pin back the liner but it wasn't hitting-just saw what others were doing and it was easy. Since I have installed 1"spacers for a wider stance (no rub again) and installed the mud flaps. With these on there is not alot of room. I use my truck off road during hunting season and still no issues.

 

BTW-no lift. Stock suspension with AVS/bags on the Platinum. Ordered Westcott but cancelled the order-didn't think i needed it and wanted to make sure it went into garage

 

The heritage grille is the superior grille. I'd like to get one for my truck.

 

If you change your mind I have the 2" readylift front with the rear Westcott arms for sale for cheaper than you can buy them.

 

Congrats !! These trucks are awesome!

 

Cali Raised catalytic shields installed.

 

Installed Rough Country sport fender flares. Here are the before vs after pics

 

Pics do the talking.

Will post initial impressions soon in another thread

Update: I posted my thoughts and sound clips here https://www.tundras.com/threads/official-3rd-gen-exhaust-thread.102782/page-7#post-3405110

 

Not sure what you mean by Heritage Grille. That's the TRD Pro Grille, or are they just the same thing with different names. I just hadn't heard it called the Heritage Grille before, but I do agree it's the nicest looking one out there.

 

Please share when you do! That looks sexy!!

 

Thank you for sharing these pictures! I have been going back and forth on getting some or not. I really appreciate the multiple angles. Looks good!

 

What's your wheel/tire size combo and offset? Looks great!!

You took the words out of my mouth. I've been on the fence for a while now, and have decided to pull the trigger, especially now that I've got new wheels on the way with a +1MM offset.

Anyone know if you can use a mudflap in combination with these? I know they're likely not needed, but curious to know if they'll fit. From what I read about installation on them, I don't think it's possible.

 

Vision Turbine Wheels 20x9 +18
Nitto Ridge Grappler 295/60/20 which are roughly 34"

 

Educate me on using catalytic converter shields for theft prevention of catalytic converters.

Don't the thieves use a Sawzall to quickly cut the catalytic converters free? I'm thinking an aluminum or SS shield would only slow them by the few seconds it would take to cut thru the shield then the converter? What am I missing here?

 

Sweet! My +1 will give me about 0.7" more poke, but I'm thinking with those flares it should still look good.

I've got some Fuel Catalyst 20x9 +1 on the way. Going to run the 275/65/20 Recon Grapplers which is just over 34". Can't wait to get the wheels here.

 

it would actually take them quite a bit longer. Although not hard to cut through it results in a lot more cutting/time. Thieves want to be quick. Generally they’ll see it and go to another truck, unless you’re somewhere rural where they know they have time.

In 11 years, working areas where cat thefts were prevalent I’ve yet to see a file where a cat was stolen where there was a shield.

 

TRD Pro is a new concept. It’s called a heritage grille because iconic Toyotas dating way back used the Toyota lettering grille

 

20" look great if done right. I ordered 285/65R20 Mickey Thompson Baja Boss AT with TRD 3" lift. I will post pics when I get the truck. I'm dropping it off this Tuesday. Celestial Silver Limited.

 

Thanks! I figured it would be something like that. Appreciate the lesson. I'll be getting the same grille soon. Looks great!

 

Posted my thoughts and sound clips here:
https://www.tundras.com/threads/official-3rd-gen-exhaust-thread.102782/page-7#post-3405110

 

Has anyone swapped a 1794 grill for the heritage but left the chrome mustache/surround? pics of so please.

 

Added Kings with Method 707s and KO2s 37x12.5R17

 

Those 37’s look great!

 

Looks great!

 

@eddiefromcali - do you still have the black flares for sale?

 

Sorry, sold them to @cgdmnky

 

keeping the rodents out of the airbox.

304 Stainless Steel Woven Wire Mesh, 5 Mesh - Aperture 4.5mm, 11.8"x23.6" (30 X 60CM) - for Vent, Cage, Cabinets Mesh, Security Guard Garden Screen

https://www.amazon.com/gp/product/B07TVNCNGJ