WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Reading the manual and found out that you need to keep the mirror adjustment switch to the L or R position for the reverse mirror down to work! i always kept in center spot. The manual didnt specify if it was trim specific or not.

Also got an extended warranty today, thanks for the referral @Coyboyzfan.

 

I just installed mine. I dropped the spare and jacked the truck up from the trailer hitch receiver a bit to help it clear the rear axle. Took about 20 minutes start to finish.

 

Good news! I'm gonna try it.

 

Can confirm this works on my 1794.

 

I used 5 mil thickness.

 

Bulletpoint mounting for phones, console tray insert, front grille TRD inserts, and Mickey Thompson Baja boss at 275/60/20.

 

Man it’s been a hot minute since I’ve been on. Glad to see everyone doing stuff. Finished wiring in my ditch lights today. Running Baja Designs Squadron lights on Rago Fab ditch light brackets and Cali Raised factory switch.

 

Any chance you could share your wiring scheme for the ditch lights to Cali switch? Did you get the switch works with the running lights? I did the the same switch with Lasfit pods. They work but I don't have it wired correctly (so the back light works with running lights). appreciate if you have anything that could help.

 

Has anyone installed the Toyota OEM dash cam?

 

https://www.tundras.com/threads/cali-raised-led-oem-square-switch.124342/


I went off the wiring diagram from this thread. I’m not concerned about the backlight for when I have my regular lights on so I didn’t wire it in. From what I figured out, the wire used for the backlight can be tied to the main ground for the switch if not going to be used for that. I figured out my hot wires and my ground and went with it. I did the same thing on my 11 Tundra. I may rewire it to have the back light for when I have my lights on but I doubt it. Honestly I keep it simple so if I decide to get another truck, everything’s easily removed and set back to stock.

 

Sorry that doesn’t really answer your question but that’s all I did.

 

thanks. that's pretty much where I am at but it is eating at me to get it working. thanks for the response.

 

Got my my Leitner ACS Rack installed tonight, now I can start planing the accessories layout.

 

So referencing the Ditch Lights wiring questions that I had (above)I finally figured it out this morning:
I have Lasfit ditch lights and their harness-color schemes on other lights are different color code but should be able to adapt from the below

Cali Switch wires/Lasfit Harness wires
Red Yellow
White Black
Black Black
Green Red (fused)
Yellow Tan wire from unused harness

The Cali Raised switch diagram on their site is incorrect as someone earlier had reported.
Works great and hope it helps someone else.

 

For anyone that's curious, here is how the Leitner rack impacts your rearview camera view. Almost doesn't matter in my opinion.

 

Added 6 inch wide 3M clear vinyl paint protection film to the door sills.



I bought this:

$28 3M Clear Protection inyl Film (6" x 96")

https://www.amazon.ca/dp/B073X7Q4M7?_encoding=UTF8&th=1

I used this as a guide to install:

https://www.youtube.com/watch?v=vfcP7_buOTU

 

I modified an oar holder for my retriever pole.





It looks like I need to install the tailgate gasket I bought next to keep the dust out.

 

Received my color matched lower valance today and couldn't resist to install it when I got home from work.
Tomorrow getting new sneakers put on...

 

Kryptek seat covers

 

VHT wheel paint to stock sr5
TRD center cap
305/70r18

 

cali raised bed rack, tepui rtt

 

Are you able to provide the part number for the Grill Surround?

Where did you order from?

Thanks!

 

Picked up new tundra yesterday. Immediately got rid of chrome. Waiting on colour matched moustache to arrive. 295’s go on this evening. 1” cornfed front levelling kit should be here any day. Shipping to Canada is sloooow!

 

Congrats on the new Rig and I know that feeling about the over kill of chrome

 

I know some folks could take it or leave it, but my latest mod was a small and easy one; finally received the TRD Pro Dash trim pieces I ordered a while back. Shipping took a while, but in my opinion, it was worth the wait. I think it makes for a really cool and interesting change to the interior trim.

 

Got my new sneakers installed today & man what a difference,first off its much softer & forgiving over bumps and pot holes vs the rubber bands that were on before, unfortunately it no longer feels like it's on rails while cornering in sport+ mode.
But I will accept that trade off considering these will handle better in the snow,rain and the beach.I ended up getting Yokohama Geolanders M/T G003 @ 285/55R22 OEM were 265/50R22 from 50~55's = 1.22" 265 ~285's = 1.75" is significant.
It finally looks proportionate.

 

Bought it and then immediately took it to the ORV park to try it out.

 

Did you get it painted or does someone sell them paint matched?? I need a new one either way, might as well get a matched one if I can.

 

I got it and had a painter do it for me,honestly it should of came this way along with color matched door handles and bumper, also I think it looks better this way but what do I know...

If you need a new one it's $239.99 and paint is about $200 maybe you could do better with that cost I dunno.
I will gladly sell you my OEM one for $100 + shipping, you can pay me after you get it.Mine has 5k miles on it and there is absolutely nothing wrong with it.No scratches,dings cracks nada.
Shoot me a PM if ya interested.

 

Thanks! I see your new one has the front license plate mount.. does your original have the wholes in it too? I got my truck from out of state and Arizona doesn’t require front plates. I took the mount off and it left 4 little holes that bug me now lol