GEN 3 (2022+) Wheels and Tires Photo thread

Method makes the 318 and 319 in 18x8.5 +40
Method makes the 703, 705, 706 in 17x8.5 +35

Neither should give you crazy poke since your stock offset is +60 I believe.

 

saw that one already looking for others some more.

 

Mickey Thompson Baja Boss AT
35x12.5r17
KMC summit 17’s with +18 offset

little too much poke for me, but it is what it is at this point. Love the look otherwise

 

Dumbass here. For all of you who got new tires and an alignment on the TRD PRO, did you have the shop just do an alignment or did you provide them with the Toyota alignment/handling specifications for the Pro? I'm upgrading from stock tires to 35x12.5x18 and I don't know if they'll look at me like an alien if i try to hand them the alignment spec document to follow.

 

Not dumb - great question _ I would like to see how others respond as I need to cross that bridge shortly...

 

The Pro specs are not correct, outside tire wear occurs. Try to get them to get your camber below 0.4 on each side.

 

Yes, https://www.tundras.com/threads/trd-pro-alignment.126131/

 

My Pro alignment was a mess day one so I went in a week or so later and had an alignment shop adjust to .4 camber and .10 toe.

 

I recently put on 37’s and used one of my 35’s as a spare. A friend gave me an older Lexus 17” wheel and I mounted it up today. The spare is a 265/70R18 at 32.6” which is a long way from 37”, so I figured my 315/70R17 (34.4”) is closer. A 37 will not fit under the 5.5’ bed.

I mounted up a 35 and it leaves just under an inch of room from the pan bar. The tire is snug against the hitch and I aired down to 12psi to help a little. BTW I have onboard air if I need to use the spare. I don’t foresee the width of the tire being an issue. I hit some speed bumps hard and the pan bar doesn’t touch so far. Yeah, speed bump testing haha

 

Is it because of the lift, different UCAs, lower offset wheels? Would the alignment specs for the pro be useful for others with lifts, aftermarket UCAs, and lower offset wheels? I don't have any of the above, but it seems at this point a lot of others have, and no one likes burning through sets of expensive tires needlessly.

 

Started with the factory 2023 TRD Off Road 20" with Falken Wildpeak AT3W 265/60r20 tires.

Now sitting on 17" Raceline 953BZ Krank wheels (17x8.5" with +18 Offset) and Falken Wildpeak AT3W 37x12.5r17.

Just added the Wilco spare tire mount yesterday. It mounts to the factory bed rail on the back of the cab.

 

That looks great !!

 

Looking at this setup for my 22 double cab limited 4x4 stock suspension
Lt285/65/18 BFG k02
Method MR305NV +18 Double black

Will it fit with no issues or rubbing?
Thank you

 

You’ll be fine

 

Thank you !! I'll post pics once I get them mounted up

 

Hi guys I’m new here and have been searching like crazy for a pictures of a Tundra with KMC GRS wheels in a +18mm with no luck… Ideally wind chill pearl with black rims. Thanks!

 

How’s the ride quality compared to stock?

 

In a real bind here and really need some tire Guru Help please!!!

I'm looking to get new tires with some sidewall meat I don't really want to stuff 35X12.5 and do the minor cutting of the plastic wheelwell guards and the tire stop, I can/could do it I'm not worried about the inner astectics of it out of site out of mind,but even if I do it'll look completely
un proportionately stuffed in the well with stock suspension to say the least.
The tires that came with it are Bridgestone Dueler H/T 260/60R22 the sidewall is 3.25 which ain't worth a shit for hitting potholes or a chipmunk they are good for city driving and cruising pristine HWY's and ideal weather conditions but I do not trust them for New England winters or even light beach combing.
Also the truck has AVS and don't want to lose that by lifting it (even with compatible lifts) the 3" OEM will remove the AVS capabilities,I really want to keep the stock rims I do like them,yeah maybe I'm asking for the world but I like them.
Maybe my resources are limited but having zero luck finding 295/70 (or around that size) M/S, AT's there all friggin street tire that have no sidewall and no bite to the tread.

Please my intentions are not to piss anyone off or offend i'm genuinely just asking for any and all advice it will be MASSIVELY AND TRULY HELPFUL AND APPRECIATED!

 

Sitting on 17x8.5 -10 with 35x12.5.17 Toyo Open Country AT3

Anyone running the same tires and getting a slight vibration at 60+mph?

 

I just test fit a wheel off of my off road truck and have some questions. The wheel is a 17x8.5 trail ready bead lock with -25.4mm BS and has 37x12.5 BFG race tire. When I bolted it up the tire stuck a full 4” past the fender flair. I was thinking about using a 0mm wheel which would be exactly 1” narrower but it’s still sticking out 3” past the flair. My question is for guys with 0mm wheels does the 3” past the flair look like too much?

 

Does anyone know if 295/70r18’s will fit on stock SR5 (non trd off road) suspension with no rub? I think most examples I’m seeing here are on TRD’s. I’m unsure if the TRD suspension sits any higher. Based on https://www.tundras.com/threads/2022-trd-off-road-vs-std-trd-height-difference.114572/ it seems like it is probably at the same height…

 

Has anybody tried these rim stickers? I know they are not a forever fix but as I save money for a new set of rims and tires, this seems like a cheap and easy way to cover the silver on my TRD OR rims. Curious if anybody has used them and how are they holding up. Thanks

$70 BOGAR TECH DESIGNS Wheel Rim Chrome Delete Sticker Decal Vinyl Film Replacement Compatible with Toyota Tundra 2022-2025, Gloss Black

https://www.amazon.com/BOGAR-TECH-D...---------&vehicleName=2022+Toyota+Tundra&th=1

 

Does it look to much for you? You can add TRD PRO flares to help get another 1" of coverage as well.

 

Everyone's taste is different, but for me it would be a bit much. I like the stance, but only if there are flares to cover it up a bit.
I think the widest available fender flares will be the Rough Country options. They have 3 options, depending if you like the rivet-look or not. They add about 2", so it will cover about half of your poke.


I like the wheel & tire combo though.

 

On my limited, I found about 5/8" to 3/4" more coverage with the TRD Pro flares so not a huge gain. The RC flares would certainly cover more of the poke.

 

Has anybody done KO2 35x12.5x20 on the stock 2023 1794 TRD off-road rims or do you know if the tire would fit the stock rims?

 

wayy too much for me. I was running 12.5's with 12mm offset and decided to add the sport flares, they cover about 80% of my tires now

 

Just did another science experiment and bolted up a 0mm off set Trail Ready with a 35x12.5 tire… still had a lot of poke. Going to order some +18mm. I ordered the King 3.0 shock set this morning and some Built Right upper control arms from the Truck Shop SD. Can’t wait!

 

0 offset is zero offset! Add in Agro tires and you get lots of poke!