TRD Pro Wheel Well Camo Trim

I saw also, general consensus is that it way overpriced for what it is.

Has anyone used it?

 

Anyone knows the part number for the red clips on the back of the TRD Pro fender flares?

 

Any chance you can share the CAD so others can 3d print? thx

 

Do you have the .stl for sale to home 3D print or the part itself?

 

this method, are they on whenever ignition is on, or when lights are on?

 

Any pics from further away? Looks amazing and would love to see this in windchill

 

Here’s a side pic.

 

Love it

 

this is what I was planning on doing. Question, are they on whenever the truck is on, or only when parking lights are on?

 

If you tap into the brown on the curt harness. That is the “running lights”. So they are not always on.

 

Figured. I’m thinking of running them to the front to an add a fuse. Put the marker lights and grille lights to that.

 

I was told this thread might be interested….

https://www.tundras.com/threads/trd-pro-fender-flare-wiring.128720/#post-3282568

Feedback would be appreciated.

 

I’m going to buy this also. Any tips or videos on how to install this by you masters of the craft would be greatly appreciated! Many thanks super excited to get my fender flares lit up!!

 

Pretty sure its this one that is ACC on that will work but dont quote me on that. I used this one for an Auxbeam switch panel and works well with a 5A fuse tap.

 

yes, also the one I used for marker lights

 

Haven’t done it yet. But there are many videos of where to put it. Also rave off rod instructions will tell you which one (I don’t have the rave lights, I ordered oem)

 

Any DFW folks not good with their hands, like me, I randomly ran into a guy with a clean Landcruiser (1993 5th Gen) filling up gas. Got to talking and learned that he’s an electrical supervisor at an Off-Road shop locally. Ended up ordering the @trailhunters hookups, and he did the rest. $200 for the labor. Let me know if you’re interested, clean and professional job. Just took pics at night, can take more in the AM if anyone’s interested. Cheers!

 

looks great! where did you get the flairs from? also, are the marker lights on all the time? or only with DRL/headlights

 

They are only on with parking and headlights. Tried to wire them to flash when unlocking/locking, but said there wasn’t a way to do that.

The flairs I ordered and received a while back from Lewis Toyota in Topeka,KS. Not sure what their inventory is like these days!

 

Best bet is to swing by your local dealership and have em price match Sparks or another reasonably price retailer, shipping gets rather expensive.

 

I was curious about the wiring because Ive got the premium led lights and the only way ive figured out how to wire them is always on. But id much prefer them only coming on with the DRL/headlights

 

Alright guys.. I have a leaky marker light

Passenger side, front. Has anyone else had any issues? I looked over these pretty darn closely during install and they appeared to be fully intact/sealed. Purchased new from the dealer, in unopened nor damaged boxes. Interestingly enough, my truck is stays in the garage most days of the week and rarely sees rain. The truck hasn't been through any low water crossings, etc, so I can only imagine this is simply condensation from rapid changes in temperature and humidity. Scratching my head here...

I do not believe the marker lights are available on their own, so it looks like I'll be purchasing another front, passenger side fender flair to obtain a replacement.

 

Doh! I forgot they are indeed the same light. I'm hoping they're no longer on back order. Thanks for the heads up, Ryan!

 

Lights weren't on back ordered when I ordered mines on sparks parts a couple weeks ago took about a week to deliver

 

Would anyone be able to give me some advice on the pics below? This is my front passenger side TRD pro flare on my SR5. I cannot get it to sit flush with the bumper. Notice the gap. The driver side is better but not by too much, still a slight gap. This passenger side is obnoxious and definitely bugs me. Everything is clipped in all the way, there just seems to be a little bend in the flare instead of being tapered down. Outside of 3m tape, which I don’t want to add there, I don’t know what else to try, or just leave it. Anyone else ran into this? Every other install I see they sit perfectly.

 

I have a little gap as well. I think a little heat from a heat gun might help also, try pulling the edge inside the fender well out, loosen the screws and pull it out a bit, that should push the rubber seal against the paint. The reasoning is that the snap/clips will act as a fulcrum.

I haven't worried about mine as I still have to pull the flares off to wire the lights.

I would avoid the use of tape as it will just make a sticky mess

 

Has anyone considered one of these?
https://www.ncs-systems.com/car-ele...s/lighting-control-interfaces/canm8-idr8.html
Seems ideal for controlling the lights.

 

Long time tundra owner first time posting here:

Anyone have the wiring for hot/ground on the rear right tail light for the 2024 Tundra Hybrids? Got the whole thing wired with the TRD Pro Fenders with the running lights but the rear right is proving to be quite the challenge.

As a reference: The wires on the rear right are: White w/Blue, White w/ Green, Green, Blue, and White.

 

Thank you! Will post some pictures when I get the last one wired in!

 

Ok read through the entire thread , but i don't see the answer to this.... i don't want to T Tap wires, does the factory wiring harness not have the spots for all the TRD Lighted gear already ? any pics of how they are or where they are wired to in the pro ?

i.e. - in this pic , there are 3 other wire spots in the loom, is it possible they are used in the TRD Pro trucks for these lights ? or on the other side where that light loom goes and plugs into the main lighting harness. If so pulling the plug and inserting a denso terminal end would be easy.



I accept the great idea of the trailer solution in the back - and that could light the flares and the rear tailgate also. but i'd really like a cleaner install for the front grill and fender lights than T-Tapping. If i missed the page sorry , please let me know which page we talk about this.
the connector to the light itself is less a concern, we'll see what trailhunter comes up with and his magic 3D printed Design

ty all