TRD Pro Wheel Well Camo Trim

Taikowaza · Apr 24, 2023

Just heard back from Sparks, they are shipping my order this week! Really excited to get my parts! Ok everyone, I’ve been following this thread forever but now finally I’m joining the club!

What’s the latest advice about what I should buy to get the lights shining bright? Any other Toyota part numbers or Amazon parts I should order today? I even thought about just installing the trim without lights but they would be too tragic! Thanks so much!

PBNB · Apr 24, 2023

Got my Sparks order! And it is correct, all 4 flares are the correct ones!

Now I need to work on the plugs and wires.

Taikowaza · Apr 24, 2023

teab said: ↑

Having just completed the wiring yesterday and I read this thread like 5 times and I basically I came to the conclusion that you have to
1.Get the pre-pinned connectors that you have to shave down to provide a way to power the lights (after the first one it goes fairly quickly with a Dremel)
2. Then find somewhere to tap into for a 12v source that comes on with the lights which can be challenging if you have the fancy headlights with the cambus.
3. Didn't ever see this mentioned but there is a hole to run the wires through behind the stock flares FYI.
4.Run Wiring to all your lights (highly suggest installing water proof connector at each light to allow you to remove the lights in the future if needed

It was time consuming to run all the wires to the lights and the whole time I was doing it I was questing if it was worth it...in the end I am very happy with the result and it was worth it. Right above your post I just posted what I did to tap into the trailer lights. Overall though for about $35.00 you get a 12v tap that comes on with running lights and you don't have to tap or cut into any factory wiring, so I considered that money will spent. Thats my take.
Click to expand...

Thank you Teab!!!!

jhtram · Apr 24, 2023

Was able to find these in stock at McGeorge Toyota. $66 each. $53 shipping which is a bit high but given the size I'm ok with that.

Let's see how quick they ship....
https://toyotaparts.mcgeorgetoyota.com/

Black widow TRD · Apr 24, 2023

Here is another connector site gents:

https://www.digikey.com/en/products/category/connectors-interconnects/20

http://www.marchelectronics.com/tyco-electronics/

555 TTT · Apr 24, 2023

Psam said: ↑

Are these a good fit? And do they come in packs of 1? Or?
Click to expand...

Fit well. Sold one by one.

Psam · Apr 24, 2023

555 TTT said: ↑

Fit well. Sold one by one.
Click to expand...

Looks good. How’d you mount them? Have any pictures?

555 TTT · Apr 24, 2023

Psam said: ↑

Looks good. How’d you mount them? Have any pictures?
Click to expand...

I installed 4 months ago, unfortunately I did not take a photo.

PBNB · Apr 24, 2023

555 TTT said: ↑

Fit well. Sold one by one.
Click to expand...

@556 TTT, what lights do you stick in there? Do you have a part number or any details on them?

555 TTT · Apr 24, 2023

I bought it in AutoZone, screwed it with an aluminum strip and installed it in a spoiler. Everything is very easy and fast.

Psam · Apr 24, 2023

555 TTT said: ↑

I bought it in AutoZone, screwed it with an aluminum strip and installed it in a spoiler. Everything is very easy and fast.

Click to expand...

Sorry not quite understanding. How is the aluminum strip attached? Is that screwed in as well?

555 TTT · Apr 24, 2023

Psam said: ↑

Sorry not quite understanding. How is the aluminum strip attached? Is that screwed in as well?
Click to expand...

The camouflage spoiler has two marker lights attachment points. Just need to screw the aluminum strip.

T315 · Apr 25, 2023

Psam said: ↑

I got colored match lunar rock flares F.S if anyone is interested.
Click to expand...

Did you ever sell this? I frequently travel to Harrisburg every other week and can meet near Philly.

Psam · Apr 25, 2023

T315 said: ↑

Did you ever sell this? I frequently travel to Harrisburg every other week and can meet near Philly.
Click to expand...

Nope, still available.

Prohit · Apr 25, 2023

teab said: ↑

Are you currently at a point of man do I do the Cambus reader headache to get a point to hook up my running lights that turn on with my running light? or maybe I can find a fuse somewhere to hook up those marker lights? But I also don't want to do an add a fuse and have a hole in my fuse cover. After getting creative I came up with a way to not tap into factory wiring without using T-taps or splices (which typically won't work with the Cambus stuff anyway) and also made it easily reversible and not cost a whole bunch of money....if that's what you're after consider reading the following. The install was for a 2023 Platinum. The light bulb moment was hell the cambus can't talk to the trailer wiring because trailers aren't that smart, so it has to be traditional relay for running lights (it is the way it is).

I used the trimmed down connectors mentioned earlier in this thread to connect the actual lights, so I won't mention that.

I essentially wired them in as Trailer lights through an add on 4-way trailer wiring harness adapter. Bonus would be if you want to add anything like back up lights or additional turn signals you can use this to do so. It took fooooooorever to run the wiring cleanly (also really like this truck and I was determined to not do my typical temporary good enough install that I'll clean up later and never actually do). All in all though it is a super clean install that I think a technician would have to really look to notice anything out of place. I wrapped everything in lomb, used the cut down ABS wheel speed connectors, marine heat shrinked everything, and added a waterproof 2 prong connector incase I have to remove the flares in the future. Including wiring, lomb, and connectors I was in at about $100.00 for material, but also have about $40.00 in extra material left over I can use on future wiring projects, so depending what you have laying around could be cheaper. Used 16ga wire for all my runs.

Bought this Curt Part#55384 to add an additional 4-way connector. It Installs between the OEM trailer plug connector and adds an additional 4-way. Confirmed the part number on Curts website before ordering and well its actually installed and working, so for sure I know it works. Plugged in very soild with o-rings and seems like it is well made with heavy gage wire where it matters. Ran the 4-way pig tail to the Passenger side frame rail near the top of the spare tire to tuck the 4-way up out and out of the way. Hook your running lights positive to Brown and negative to white and bobs your uncle. I think the led's pull like 0.4 or 0.7 watts/ea so wasn't worried about adding a hole 1.6-2.8watts at about 0.13-0.23 amps total for all 4 running lights.

$31 CURT 55384 Replacement Vehicle-Side Custom USCAR 4-Pin Trailer Wiring Harness, Black, 6 x 3 x 9"es

https://www.amazon.com/dp/B0009FJ38Q?ref=ppx_yo2ov_dt_b_product_details

Bought one of these (you could skip this and just cut the wires on the Curt harness but hell for $2.00 why not eh??

CURT 58030 Trailer-Side 4-Pin Flat Wiring Harness with 12" Wires

https://www.amazon.com/dp/B001GN3BSI?ref=ppx_yo2ov_dt_b_product_details&th=1

Essentially all I did was wire the running lights as if it was a trailer and it is no different than plugging in 4-way trailer so it would be a pretty hard argument if I ever have warranty issues. No splicing into factory wiring and all you would have to do is unplug the Curt Adapter and its back to factory.
Click to expand...

when wired this way are they on when the truck is on or only when your lights are on?

Tundra17944Ever · Apr 25, 2023

teab said: ↑

Are you currently at a point of man do I do the Cambus reader headache to get a point to hook up my running lights that turn on with my running light? or maybe I can find a fuse somewhere to hook up those marker lights? But I also don't want to do an add a fuse and have a hole in my fuse cover. After getting creative I came up with a way to not tap into factory wiring without using T-taps or splices (which typically won't work with the Cambus stuff anyway) and also made it easily reversible and not cost a whole bunch of money....if that's what you're after consider reading the following. The install was for a 2023 Platinum. The light bulb moment was hell the cambus can't talk to the trailer wiring because trailers aren't that smart, so it has to be traditional relay for running lights (it is the way it is).

I used the trimmed down connectors mentioned earlier in this thread to connect the actual lights, so I won't mention that.

I essentially wired them in as Trailer lights through an add on 4-way trailer wiring harness adapter. Bonus would be if you want to add anything like back up lights or additional turn signals you can use this to do so. It took fooooooorever to run the wiring cleanly (also really like this truck and I was determined to not do my typical temporary good enough install that I'll clean up later and never actually do). All in all though it is a super clean install that I think a technician would have to really look to notice anything out of place. I wrapped everything in lomb, used the cut down ABS wheel speed connectors, marine heat shrinked everything, and added a waterproof 2 prong connector incase I have to remove the flares in the future. Including wiring, lomb, and connectors I was in at about $100.00 for material, but also have about $40.00 in extra material left over I can use on future wiring projects, so depending what you have laying around could be cheaper. Used 16ga wire for all my runs.

Bought this Curt Part#55384 to add an additional 4-way connector. It Installs between the OEM trailer plug connector and adds an additional 4-way. Confirmed the part number on Curts website before ordering and well its actually installed and working, so for sure I know it works. Plugged in very soild with o-rings and seems like it is well made with heavy gage wire where it matters. Ran the 4-way pig tail to the Passenger side frame rail near the top of the spare tire to tuck the 4-way up out and out of the way. Hook your running lights positive to Brown and negative to white and bobs your uncle. I think the led's pull like 0.4 or 0.7 watts/ea so wasn't worried about adding a hole 1.6-2.8watts at about 0.13-0.23 amps total for all 4 running lights.

$31 CURT 55384 Replacement Vehicle-Side Custom USCAR 4-Pin Trailer Wiring Harness, Black, 6 x 3 x 9"es

https://www.amazon.com/dp/B0009FJ38Q?ref=ppx_yo2ov_dt_b_product_details

Bought one of these (you could skip this and just cut the wires on the Curt harness but hell for $2.00 why not eh??

CURT 58030 Trailer-Side 4-Pin Flat Wiring Harness with 12" Wires

https://www.amazon.com/dp/B001GN3BSI?ref=ppx_yo2ov_dt_b_product_details&th=1

Essentially all I did was wire the running lights as if it was a trailer and it is no different than plugging in 4-way trailer so it would be a pretty hard argument if I ever have warranty issues. No splicing into factory wiring and all you would have to do is unplug the Curt Adapter and its back to factory.
Click to expand...

@teab do you have pics of the connections you made at the trailer plug?

T315 · Apr 25, 2023

Psam said: ↑

Nope, still available.
Click to expand...

I'll be in PA in the next couple of weeks. I'll message you when I have a solid date. Also, how much are you willing to let them go for?

iiawah808 · Apr 25, 2023

Sparks just hit me up and stated mine will ship out 5/2 and that they will double check I get the right flares. Anxiously waiting.

jhtram · Apr 26, 2023

jhtram said: ↑

Was able to find these in stock at McGeorge Toyota. $66 each. $53 shipping which is a bit high but given the size I'm ok with that.

Let's see how quick they ship....
https://toyotaparts.mcgeorgetoyota.com/
Click to expand...

TRD Pro flares shipped yesterday and are arriving today. They actually ship from Revolution Parts, which appears to be an OEM parts wholesaler.

Taikowaza · Apr 27, 2023

Hooray!!!

Thank you for your order from Sparks Parts! We wanted to let you know that your order (#132587) was shipped via FedEx. You can track your package at any time using the link below.

This shipment includes the following items:

Item #

Description

Qty

PT871-34220-02

Tun Fender Flare Black

1

PT871-34223-02

Tun Fender Flares Bl

1

PT871-34221-02

Tun Fender Flare Black

1

PT871-34222-02

Tun Fender Flares Bl

1

Thank you for your business and we look forward to serving you in the future!

Thank you for your business and we look forward to serving you in the future!

Yota802 · Apr 27, 2023

Taikowaza said: ↑

Hooray!!!

Thank you for your order from Sparks Parts! We wanted to let you know that your order (#132587) was shipped via FedEx. You can track your package at any time using the link below.

This shipment includes the following items:

Item #

Description

Qty

PT871-34220-02

Tun Fender Flare Black

1

PT871-34223-02

Tun Fender Flares Bl

1

PT871-34221-02

Tun Fender Flare Black

1

PT871-34222-02

Tun Fender Flares Bl

1

Thank you for your business and we look forward to serving you in the future!

Thank you for your business and we look forward to serving you in the future!
Click to expand...

Nice!! Now we have to figure out an easy way to wire these.

jhtram · Apr 28, 2023

Really like how these fit with OEM wheels and a 1" spacer

Taikowaza · Apr 28, 2023

jhtram said: ↑

Really like how these fit with OEM wheels and a 1" spacer

Click to expand...

These look so much better! Awesome work! Did you wire them too?

jhtram · Apr 28, 2023

Taikowaza said: ↑

These look so much better! Awesome work! Did you wire them too?
Click to expand...

didnt wire them. Still watching this thread for a viable option.

Yota802 · Apr 28, 2023

jhtram said: ↑

Really like how these fit with OEM wheels and a 1" spacer

Click to expand...

Looks sweet! The Pro flares look to give just the right amount of coverage and a bit more of an off-road look.
I’m looking forward to installing the flares. Also a set of REK GEN flaps going on at the same time.

jhtram · Apr 28, 2023

teab said: ↑

Really happy with what I did it on page 18 of this thread with the trailer wiring. If you have Cambus i.e. the fancy headlights its about the only "EASY" (heavy on the quotes) that I could think of after a lot of research and pondering life choices on if I should even wire them up. Someone could start making a ready to go harness for these, but I imagine by the time you gather all the pieces and assemble it....it would still be very time consuming to make and also be very expensive by the time you factor in all the labor it takes to make one. I think the main bottleneck would be the connectors to the lights because there is no connector available off the shelf that allows plug and play there. Seriously considered starting to make some but after all the time it took me to put it together I wouldn't want to set my self up for that kind of torture.
Click to expand...

Hahaha, no way am I attempting that. Far above my skill level and patience.

iiawah808 · Apr 28, 2023

I really would love some 3d printed blanks to install in the flares instead of the lights.

I don’t plan on wiring mine up and installing as is.

Tundra17944Ever · Apr 28, 2023

teab said: ↑

Really happy with what I did it on page 18 of this thread with the trailer wiring. If you have Cambus i.e. the fancy headlights its about the only "EASY" (heavy on the quotes) that I could think of after a lot of research and pondering life choices on if I should even wire them up. Someone could start making a ready to go harness for these, but I imagine by the time you gather all the pieces and assemble it....it would still be very time consuming to make and also be very expensive by the time you factor in all the labor it takes to make one. I think the main bottleneck would be the connectors to the lights because there is no connector available off the shelf that allows plug and play there. Seriously considered starting to make some but after all the time it took me to put it together I wouldn't want to set my self up for that kind of torture.
Click to expand...

Yeah. I’m sold on what you did. My parts are coming in on Sunday. I already have plugs trimmed down and ready to splice.

jhtram · Apr 28, 2023

teab said: ↑

No Lights for you then!!

If you can splice a wire....

Click to expand...

Hahaha! Love that movie.

Maybe I'll re-read your post a few times and reconsider....

Ruger19 · Apr 30, 2023

I just installed these yesterday. They took care of the little poke I had going on. Paid $72 a piece and no shipping from my local dealer. Had them in one day.

Log in or Sign up

Welcome to Tundras.com!

TRD Pro Wheel Well Camo Trim

#421
Taikowaza New Member

#422
PBNB Needy

#423
Taikowaza New Member

#424
jhtram If I'm curt with you it's because time is a factor

#425
Black widow TRD New Member

#426
555 TTT New Member

#427
Psam New Member

#428
555 TTT New Member

#429
PBNB Needy

#430
555 TTT New Member

#431
Psam New Member

#432
555 TTT New Member

#433
T315 New Member

#434
Psam New Member

#435
Prohit New Member

#436
Tundra17944Ever ‘16 Limited to ‘23 1794

#437
T315 New Member

#438
iiawah808 New Member

#439
jhtram If I'm curt with you it's because time is a factor

#440
Taikowaza New Member

#441
Yota802 New Member

#442
jhtram If I'm curt with you it's because time is a factor

#443
Taikowaza New Member

#444
jhtram If I'm curt with you it's because time is a factor

#445
Yota802 New Member

#446
jhtram If I'm curt with you it's because time is a factor

#447
iiawah808 New Member

#448
Tundra17944Ever ‘16 Limited to ‘23 1794

#449
jhtram If I'm curt with you it's because time is a factor

#450
Ruger19 New Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tundras.com!

TRD Pro Wheel Well Camo Trim

#421 Taikowaza New Member

#422 PBNB Needy

#423 Taikowaza New Member

#424 jhtram If I'm curt with you it's because time is a factor

#425 Black widow TRD New Member

#426 555 TTT New Member

#427 Psam New Member

#428 555 TTT New Member

#429 PBNB Needy

#430 555 TTT New Member

#431 Psam New Member

#432 555 TTT New Member

#433 T315 New Member

#434 Psam New Member

#435 Prohit New Member

#436 Tundra17944Ever ‘16 Limited to ‘23 1794

#437 T315 New Member

#438 iiawah808 New Member

#439 jhtram If I'm curt with you it's because time is a factor

#440 Taikowaza New Member

#441 Yota802 New Member

#442 jhtram If I'm curt with you it's because time is a factor

#443 Taikowaza New Member

#444 jhtram If I'm curt with you it's because time is a factor

#445 Yota802 New Member

#446 jhtram If I'm curt with you it's because time is a factor

#447 iiawah808 New Member

#448 Tundra17944Ever ‘16 Limited to ‘23 1794

#449 jhtram If I'm curt with you it's because time is a factor

#450 Ruger19 New Member

Products Discussed in Entire Site Forum: 3rd Gen Tundras (2022+) Thread: TRD Pro Wheel Well Camo Trim

#421
Taikowaza New Member

#422
PBNB Needy

#423
Taikowaza New Member

#424
jhtram If I'm curt with you it's because time is a factor

#425
Black widow TRD New Member

#426
555 TTT New Member

#427
Psam New Member

#428
555 TTT New Member

#429
PBNB Needy

#430
555 TTT New Member

#431
Psam New Member

#432
555 TTT New Member

#433
T315 New Member

#434
Psam New Member

#435
Prohit New Member

#436
Tundra17944Ever ‘16 Limited to ‘23 1794

#437
T315 New Member

#438
iiawah808 New Member

#439
jhtram If I'm curt with you it's because time is a factor

#440
Taikowaza New Member

#441
Yota802 New Member

#442
jhtram If I'm curt with you it's because time is a factor

#443
Taikowaza New Member

#444
jhtram If I'm curt with you it's because time is a factor

#445
Yota802 New Member

#446
jhtram If I'm curt with you it's because time is a factor

#447
iiawah808 New Member

#448
Tundra17944Ever ‘16 Limited to ‘23 1794

#449
jhtram If I'm curt with you it's because time is a factor

#450
Ruger19 New Member

Products Discussed in